Water Vacuum Pump Installation On China Wood CNC Router-Skype:jackkong66

[@LuisAcosta-k2t]

Hello you can help I have one of those bombs but where I bought it they told me that I can connect 3 phases and simple phase but I can’t get someone to make the simple phase connection could you help me?

[@MAbid-zt7nm]

how may kw this pump? can we use this single pump for 1.5 x 3 meter cnc router machine? thank u

[@longhorneye]

I have a different problem with this pump. When it works, the temperature get above 50 Celsius degree. I wondering what is solution to cool it down.

[@antoniosypeng1975]

you need a cooling tower to circulate the water coming from vacuum pump that solve the problem

[@ronaldbouland4182]

I have also this kind of pump, is it normal for the watter to heat up to 70 deg C?

[@actiontower]

as i saw on it >> it should be 40 deg c or less. did you fill it until water come out of valve on top ? and please tell me what is the pressure value on your vacuum indicator ?

[@BrownMInc]

Hello Ronald, we just received one of these pumps for our cnc router but arent clear on wear the power is drawn from. Do we connect it to mains or should it be connected through our cnc router's control box? Thank you

[@davidbrister1780]

what company sells this pump? thx

[@KongJack66]

[phone] Whatsapp

[@michaellabarca1523]

What is the Model # for the actual pump housing? I have the same pump on my CNC router and need parts to repair the actual pump manifold.

[@yutwob]

Whats wrong with it? I also have a similar pump.

[@michaellabarca1523]

I needed a front seal for it but I found one.

[@yutwob]

Oh ok, what was it doing? Mine's leaking out of the bottom but I'm not sure if that's suppose to be happening.

[@yutwob]

Where did you find the part?

[@michaellabarca1523]

I got the seal from Joostindustrial.com. They are a pump repair and parts supply company.

[@alejandrofarah2631]

HI! I have one of those and it does not make a good suction. It sucks to the table the first MDF (3mm) plate but not the one to be worked with the router. Any suggestion to solve the problem?

[@KongJack66]

18mm spoiled board with edge banding and glue around it , then you can get good vacuum for small board

[@Gaatech]

Is the pump single or 3 phase

[@KongJack66]

3 phrase

[@АлексейЛобанов-й9э]

@@KongJack66 And what are the characteristics and what is the cost?

[@KongJack66]

@@АлексейЛобанов-й9э Please Email:[e-mail] [phone] Whatsapp Wechat Zalo

[@mertkars1463]

send me the link of the product, wanna buy

[@KongJack66]

please let me know email or whatsapp , thanks

[@mertkars1463]

@@KongJack66 [e-mail] do you have a shop on alibaba?