Watercooling a 14900K and a 4090 in a 13 litre NAS case [part 6]

[@Bengt.Lueers]

I applaude the power button. That is a thing of beauty.

[@c_beau]

Maybe since now you've increased the space between the two metal plates that make up the front panel, you may be able to route a USB C input that is sitting flush vertically inside of that space. It might be too large to squeeze in around all of the other components like the pipes, but maybe an extension could be threaded through the build from a spare sata port on the mobo, so that the components for the inner section of the port aren't interfering.

[@jhenrikph]

This is bloody amazing! Such a cool build! Not seen anyone put so much time and effort to customize a build that you do. Gets me all tingleling 🥳 By god make som custom lenght custom sleeved mdpc cables 😅

[@mathewbriggs6667]

you got me to watch a 33 min video at 100% with no skips or checking my phone i think thats a new record grate video cant wait to see the end result

[@flatcaplad]

For the space on the back panel I think a leather pull tab embossed with your logo would look awesome.

[@scottheighton5971]

Cut out the Billet Labs logo on the back! Use it as a vent and decoration in that blank spot! Easily the best looking option you could go with for that spot!

[@glynkatkin]

Awesome work as usual, I think a copper logo on the back, with the hole cut out behind it, would look fine, more mixing of metals on the rear panel should be fine. it'll all dull alittle in colour when you polish it all to a mirror sheen, and its reflecting mostly white reflections.

[@smartguy9765]

32:31 - A circular vent for a 40mm Noctua fan!

[@maho8204]

YES!

[@Fincher123]

The Feet in 1/4 the hight would get great. You Also could use the Square ones with more rounded Corners. For the opening at the Back i would use a leather strap.

[@LiquidHaus]

Routing on the ground takes me back! Loving the work and thought processes on this one. I would have voted for a slab of 6mm billet instead of wood but of course that’s more work to deal with. What a build 👏🏻

[@MrJfranks21]

for the rear area: the copper Billet Labs cutouts from your gpu backplate, or if you are set on a vent, then the Billet Labs logo somehow incorporated into the actual vent.

[@TheWaxGoat]

that power button is pretty epic! such a beautiful build, can't wait to see the rest!!! =)

[@felipecruz3061]

I’m literally addicted to watching your videos…. Keep up the good work bro

[@agh8459]

For that back panel, I definitely like the "brasshole"

[@zasssalomsoak7862]

Love it. The only thing I would change is the wood piece in the middle 😂 I understand why you used it, but.... It kind of doesn't match the quality of the rest. Those small blocks at the bottom are fine, but this.... Well, what matters the most is customer satisfaction, if he'll be happy, who am I to argue 😂 Btw - those standoffs look awesome, I think you should use them 😎

[@Bengt.Lueers]

Wohoo! A new episode!

[@danielturunen7237]

I like the brass standoffs! Nice, big and bulky :)

[@kaeleib]

I feel like the case needs more copper on the outer shell. like an accent line around certain corners or curves to balance out the fabricating look to it. Other than that its coming out nicely!

[@Spreadie]

How about a hammered finish on those case feet? I know the could be a proper PITA, but it could look great.

[@olefredrikjensen1994]

A type of logo with the names of the creator on the back plate would have been nice. Excited about the performance and temperatures.

[@Bengt.Lueers]

A 2,5" drive in a build of this caliber?! That better be U.2.

[@Villepillle]

Thats a damn sweet build you've got going there mate! 👍

[@Galy4a]

Saw one of the parts of this series four months ago, came back to find out how it all ended and saw that less than an hour ago a new video was released)

[@spinkey4842]

the rear handle, the corners should match the corner curves of the case

[@Slay3rOne]

I was gonna say the same thing the moment I saw it installed the first time. And the bottom having more margin than the top made it look wonky. 🥴 But then he fixed it, so yay! So much better! Having a logo at the rear would be a really nice touch I think, not sure about the material though. And the feet are a very nice touch, but maybe half height would look better, not sure.

[@spinkey4842]

@@Slay3rOne haha if i just watched a bit more after showing the handle i' wouldn't have made this comment.

[@MiyabiJNEP]

Glorious! Nicely done! I love it.

[@brunophoferro]

please, let me keep the carpet, it’s beautiful

[@Sasur44]

Definitely needs a Billet Labs logo on back.

[@robertmondik629]

Poor carpet😢 ,but great build

[@TheCyberWolves]

Part 4 - Video i have suggested to use acrylic sheet for same concern.😇

[@Bengt.Lueers]

Acrylic might not have been stiff enough for this build.

[@anessbouguerra7807]

nice build

[@SamuelWood1]

Love it! My vote is for a logo in the gap 🅱️

[@gorps]

Jonsbo N1 of Theseus

[@Behemoth33]

4:42 why not use black acrylic or perspex? Still watching atm

[@MillouwzBaby]

Just awesome !

[@ZombieLurker]

The build is a beauty but, I'am confused how that tiny radator is gonna come anywhere close to being able to cool a 14900K and a 4090, without seriously underclocking both of them, or disabling cores. Basically making it so just using a 14700K and a 4080 would've saved some money. Curious to see the finished build.

[@BilletLabs]

There are three radiators, one 120mm and 2x184mm. Still not loads of cooling, but we think it will be enough to avoid thermal throttling. But we will see in the upcoming episode!

[@ChristopherYeeMon]

When this is all done, do another with an AMD build and then compare them in benchmarks

[@EcoAcid]

Are you leaving the 14900k in there knowing what we know about them? The customer in 6 months: Hey so my CPU failed and the 5090 is out. Can you make a new build? Also that power button is gorgeous.

[@bavoj]

Hopefully that 14900K won't fail like those other intel chips.

[@Ren-kei]

lmao :[

[@CrYsTaLySeR]

👍👍👍

[@igorp]

looks like a toaster

[@XenonG]

Just design and CnC out the rest of the case at this point, why keep going with the off the shelf NAS case 🤣

[@Sullrosh]

they make threaded rivets

[@howietorock]

looks like a toaster lol

[@Username_CC_]

Poor guy going through all of this just for his 14900k to burn out in a few months. IE Intel scammed you man.

[@mgut17]

apparently he is blind, he can use the aluminium plate and still wouldnt have to move anything

[@bareIHS]

Please leave the back ad it is 😭

[@rapamune]

Consider letting the customer know about the extremely high defect rate on current 14900K's. The 9950X is around the corner and will be significantly better.

[@winnik23]

its not about size honey

[@abdelmalekmekaddem9251]

i don't like wood on pc it's hold a lot of heat in it