Waterslide Snowglobe Tumbler

[@indigenousinkbeads2023]

Hello, you must be doing something right, that was perfect I'm going to have to try your ratio & that glitter omg very pretty!

[@stalisatyler8857]

Hey. Are you able to show the process of sanding,and what to do after that?

[@laylaemily]

How did you seal the waterslide

[@michellesamaniego5316]

Hi there, I sealed with a few coats of Rustoleum 2x Clear gloss.

[@caffeinatedmoondrop]

What is the ratio of water and glycerin mixed?

[@michellesamaniego5316]

You can use whatever ratio you like, even just use the glycerine without the water. Test out ratios to find the flow that works best for you.

[@queenofthepack-nr9mw]

What paper you used for decal and logo sticker

[@michellesamaniego5316]

I used glossy sticker paper.

[@queenofthepack-nr9mw]

@@michellesamaniego5316 place link inbox please

[@amandamartinez8024]

How many coats of brite tone did you do?

[@Michmackenna]

Are you using epoxy with bare hands?? And no respiratory protection?

[@michellesamaniego5316]

No. This is Brite Tone by Crystalac. It's not resin or epoxy, it's a water based alternative. So no gloves or respiratory masks required.

[@cireyes8583]

Thank you you much😍✨! I have a question, do I have to sand the acrylic tumbler then add decals or permanent vinyl? Or I can just add it then add brite tone ? Thanks😇

[@michellesamaniego5316]

If you use permanent vinyl, you won't need to seal. If you're using waterslide, you will need to seal. Best results will be for you to sand the clear tumbler, apply a coat ot 2 of BT or GFand then apply the waterslide. The sanding will give a surface that the BT or GF or even epoxy to adhere to.

[@cireyes8583]

@@michellesamaniego5316 Thank you so much, I really appreciate it!! 🥰

[@jojosicairos6903]

Another thing also remember to use a mask and gloves when using resin… it’s very toxic.

[@michellesamaniego5316]

@@jojosicairos6903 definitely!!

[@melifybymel]

Hi! What waterpaper slide did you use? How did you get the waterslide not to be transparent? Thanks!

[@michellesamaniego5316]

There are both clear and white waterslide papers.

[@tonie1106]

Thank for sharing how you made the hole, I was going to use a glue gun but the rhinestone applicator is perfect because I do have one and thanks a perfect hole. 😊

[@francesdiaz-morse1609]

What waterslide paper do you use? I've tried Inkjet Waterslide Decal Paper. Even if I seal it, the image comes off the backing fast and image is ruined!

[@queenofthepack-nr9mw]

????

[@francesdiaz-morse1609]

@@queenofthepack-nr9mw at the time I was new to making waterslides. I didn’t know the difference between sublimation printer vs inkjet. I printed with the wrong printer!🤦🏻‍♀️