This is exactly how I do mine, altho I do etch a little bit. Then after the patient has adjusted to it I can prepare one or more crowns and make the change over. Well done video, a credit to you. I have developed a line that helps patients get used to the new bite. I say to them, "It will take 3 days for your brain to write new software for this bite. You will hate me for 3 days, but I don't want to hear about it. Then on the fourth day you will find that you are using your new shapes quite well, and after that they will seem like they have always been there" Since I started telling patients this bite difficulties have dropped to zero.
@Anas_93_Dec3 жыл бұрын
Haw can you adjust the anterior tooth that fracture
@johnfenn3 жыл бұрын
@@Anas_93_Dec I am sorry I dont understand what you mean by adjust. If you need to reshape anything you grind with a drill, smooth with snapper and finish with a diamond point.
@relyrely11013 жыл бұрын
Is this permanent?
@johnfenn3 жыл бұрын
@@relyrely1101 No it is really only a pattern. It may last 2 weeks or it may last 6 months. So you put this on, then prepare a quadrant for crowns, inlays whatever. Then use the same impression to make the temporaries. The beauty of it is that while you restore one side the other side is stabilised and secondly the patient has their new vertical dimension and can start getting used to it.
@sedaralmaliky4009 Жыл бұрын
@@johnfenn what name of white material ?
@VideosproductionHD4 жыл бұрын
Nice music, almost started crying🤣
@karolinakumidor56344 жыл бұрын
What’s the piano piece tho? Would like to listen to the full version ;D
@mohammedrefaat29773 жыл бұрын
@@karolinakumidor5634 Una Mattina by Ludovico Einaudi
@missyb95263 жыл бұрын
@@mohammedrefaat2977 man u U R GOD SENT thank q sooo much
@abdelrhmanhassan3388 Жыл бұрын
Really fantastic work 👏
@mahdinaimi64139 ай бұрын
Looks better than initial, definitely. But patient can not clean interdentally. Cervically the gums are pressed by the material - which is a temporary resin material by the way…- and given that, the gums will recede pretty quickly and badly.
@DentalMoviescom7 ай бұрын
It’s only for planning the treatment. It’s temporary
@cptedwardkenway3 жыл бұрын
is that temporary?
@alewayne8 жыл бұрын
what is your protocol in this case? you put something, like vaselin oil, on teeth to not bond material, make mock-up and then? you adjust form, occlusion and other things then do you take impressions to make provisionals?
@parizanka100011 ай бұрын
Hvala
@lucerobroncanocajacuri25037 жыл бұрын
hi, then how can you remove it??
@Nooneis05 жыл бұрын
They just seeing his teeth frame
@relaxwithmusic53902 жыл бұрын
Seems magic 🎩 ✨
@drshwetaprostho63013 жыл бұрын
Nice video!
@humairasiddique74033 жыл бұрын
What material did you use to make tray for mockup
@furqansalamissa5122 жыл бұрын
Silicone
@theblazzed2114 Жыл бұрын
@@furqansalamissa512 C
@parikshitgupt30557 жыл бұрын
How are they removed????
@karolinakumidor56344 жыл бұрын
They don’t stick to the tooth surface very firmly. No bonding, anything. It’s just a test-drive to make sure that patient’s and dentist’s vision is the same for the final result 😊
@priyas2331Ай бұрын
@karolinakumidor5634 how long do they have the mock up on? Can they leave with it to test drive the looks and feels for a week and come back?
@rownakbhattacharjee70465 жыл бұрын
No teeth preparation?
@shwet3787 жыл бұрын
what is the matetial being used?is it luxa temp...used for temporary crowns
@noemasanchez55436 жыл бұрын
Mi pregunta es? El px va a pagar buenas coronas? Porcelana, emax zirconia ? Porque michos malos doctores quieren dejar solo acrílico o materiales de mala calidad porque el px no lo puede pagar. Al menos en mexico coronas de buen material por 16 dientes serían como 80 mil pesos mexicanos en usa sería mucho más
@scatmanjohn61935 жыл бұрын
Sí tienes razón al pasar del tiempo el acrílico cambiara de.color y tendrá mal olor.me gustaría que las casas de ventas de materiales dentales no vendan tan cara la porcelana así los precios para pacientes no sería muy alto y habría accesibilidad para todo tipo de pacientes de bajos recursos económicos .saludos desde Perú
@sebastianalegre49045 жыл бұрын
@@scatmanjohn6193 no solo eso, muy aparte del mal olor del acrílico sumale su irritabilidad a mediano plazo para con las encías.
@hazztv63173 жыл бұрын
Cuantos es 80, 000 piso a dinero de usa
@juansamaniego95186 жыл бұрын
I dont understand... Is this procedure just for looks? Or for an impression of later made crowns? Implants? Can you actually chew food with this or are they like dentures
@namosamal16915 жыл бұрын
juan Samaniego it is temporary, only to let the patient know the looks of his future FPD, and to test the occlusal vertical dimension, so neither etching nor bonding is used.
@harry90642 жыл бұрын
Thank you
@minervarivera4654 жыл бұрын
Pls how can I get this procedure and where in Orlando Florida more information pls Thanks
@mehjabeennadeem5 жыл бұрын
sir vry informative video,jst want to knw that by hw much u have raised the bite, i mean (mm). that mock up is without prep?plz let me knw sir.
@TheCooldude45437 жыл бұрын
what will be your planned final restoration for this teeth
@johnfenn3 жыл бұрын
Crowns or bridges. My preference was Cerec only done with a material called Enamic. I could do may 5 teeth in an afternoon. so 3 visits for the upper and 3 for the lower.
@dulcepinili9983 жыл бұрын
How stable is the mock up.what if you eat hard food.
@johnfenn3 жыл бұрын
@@dulcepinili998 Not very. I used to say this is only for smiling at the girls OK? Then they would want an emergency visit because they broke it eating almonds, or corn on the cob. Which was interesting because within 2 or 3 days they are so used to the new bite that they eat such things. I also invited on restoring the posteriors first, because if you did theanteriors first they would not come back, until they had broken the crowns all out. You must have posterior teeth to protect the anteriors.
@deerumusic76512 жыл бұрын
Thank you very much for sharing.. beautiful ❤️
@pauleaconnors27115 жыл бұрын
How do you remove it? Drill it off? If you were to use this same matrix over preps, would you be able to without having the temp get stuck in place? Also, with this one you made for using only a few days, will you trim the margins around the tissue, or leave it?
@johnfenn5 жыл бұрын
It just pulley's off with a scaler.'
@dentisteamel36482 жыл бұрын
Thank you 💜
@RK-eg3us7 жыл бұрын
how long as max patient can keep it on.
@shadyshelby83613 жыл бұрын
Few days
@edgarmartinez50457 ай бұрын
Eso es mta mal, debería ser diente a diente y dejar espacio para el uso del ilo dental.
@mittaldentalclinicnewdelhi7518 жыл бұрын
hey doc. have you raised VD in this case . have you make preparation of 46 before giving mock-up
@bmatejkowski8 жыл бұрын
Dear @vishnu Mittal. Yes I raised VD but I did not do preparation. Warm regards.
@mehtabdiab86536 жыл бұрын
How long pt will wear it to adapt for new VD till final restoration done ,,,,thanks
@douglasachaiba78855 жыл бұрын
Mehtab Diab about 3 mths
@-Mlbo5 жыл бұрын
Cuanto tiempo dura en boca este material
@hazztv63173 жыл бұрын
2 dias
@animekyu36027 жыл бұрын
Nice Solution . but how much does it last to hardens in the mouth and for how long can last for the patient ?
@diegomartinez3277 жыл бұрын
it take like a minute in mouth, and remains for days-weeks
@dokdok8237 жыл бұрын
Какой кошмар!!! Хоть бы попытались по убирать нависающие края композита с маргинальной десны!!! Там через сутки гингивит начнётся. За полировку я вообще молчу......короче для глубокой сельской местности с натягом прокатит, но не более того. Вернусь к началу - какой кошмар......
@onemillionear5 жыл бұрын
Как всегда найдёт прыщь , который докопается. Смысл ролика до вас не дошёл.
@asmitashah89572 жыл бұрын
Which material r u using in tray??
@mero1002010 Жыл бұрын
I think it is a heavy body rubber base impression material.
@berkcihangiroglu31315 жыл бұрын
Is that prepless restoration?
@dNEj4q3ce8 жыл бұрын
How can you get the yellow dental work white again?
@bmatejkowski8 жыл бұрын
this is only mock up. so it is only for couple of days. But if it will get yellow because of the food I advise my patients to brush teeth with baking soda
@trusharthakor43554 жыл бұрын
Bartosz Matejkowski hello so is it not permanent solution for those who have gap between teeth ?approximately how much it can be longer ?
@lalitalaxmi5173 жыл бұрын
can we do veener preparation on the same restoration using it guidance
@DentalMoviescom3 жыл бұрын
of course.
@uri99r5 жыл бұрын
Where is the music from?
@missyb95263 жыл бұрын
Una Mattina by Ludovico Einaudi
@ماهرمحمدحسنالكاظمي4 жыл бұрын
Not.why y didnt use etching & bonding resin befor compsit resin vienirig of lab.surface ??!!!
@wg63777 жыл бұрын
How long does this mock up last ???, and can this mock up be done with some material that will last much longer time ?
@mirthariveros49505 жыл бұрын
Que materiales usan para los dientes artificiales. Que marca es o Como se piden en la dental?
@axelaguilar94165 жыл бұрын
Es resina bisacrilica, y el procedimiento se llama mock up
@ilopid8 жыл бұрын
upper right midline shift, hard case specially with compromised centric relation
@bmatejkowski8 жыл бұрын
definitely it is not an easy case
@suhailhere58997 жыл бұрын
what is the tray made of?
@Carl6F7 жыл бұрын
suhail here heavy body of polyvinyl siloxane
@minervarivera4654 жыл бұрын
Como consigo información del procedimiento?
@طريقالصالحين-ب7ز6 жыл бұрын
Как называется материал?!?
@madisonm78157 жыл бұрын
is this permanent?
@mirjannam7 жыл бұрын
Selena Lopez no. :)
@Satolachos8 жыл бұрын
what about floss space?
@TuanNguyen-oc5gq8 жыл бұрын
Im a dental student, so I dont know much, but I think mock up is only use to test VDO and see how pt likes the way his future crowns will be. So no etch and bond here (look how glossy the enamel is before he seat the index)
@bmatejkowski8 жыл бұрын
Yes. It is only for testing.
@azouz56754 жыл бұрын
@@bmatejkowski good job dr how you determin the exact dvo of patients
@ChUma-jj7cd2 жыл бұрын
Great
@zein8813 жыл бұрын
Goood video thanks too much
@Guly3297 жыл бұрын
зубы как-нибудь обрабатывались перед установкой
@putrahadi94465 жыл бұрын
Perfecto👍
@soufainamrane55748 жыл бұрын
please can you tell the name of this matérieux
@bmatejkowski8 жыл бұрын
You mean material for mock up?
@aichadadou38865 жыл бұрын
@@bmatejkowski yes please
@HACKERdENTIST2 жыл бұрын
@ugobabyy7 жыл бұрын
Is this a permanent solution?
@bmatejkowski7 жыл бұрын
it is not permanent.
@dreamhigh52507 жыл бұрын
Bartosz Matejkowski i have gaps in the font is mock up a good solution ? how much does this last ? is bonding a better solution ?
@johnfenn5 жыл бұрын
@@dreamhigh5250 This is only for testing. Later each of those teeth will need crowns.
@sriwyperfect29949 ай бұрын
وووووووااااااوووو ❤❤❤❤❤
@juanitafilomeno55865 жыл бұрын
Que poco criterio.ahora ay abridores.de boca.para poder trabajar mejor..digo....
@lucifernbk25504 жыл бұрын
Wtf that’s wak
@resadisa40138 жыл бұрын
What is it?boding
@bmatejkowski8 жыл бұрын
+Resad Isa What do you mean?
@resadisa40138 жыл бұрын
Bartosz Matejkowski aycriling material is being
@bmatejkowski8 жыл бұрын
+Resad Isa I am not sure what you mean, but I used BIS-Acrylic crown and bridge temporary material - I hope that this is what you want to know. Ask if you want to know something more. Regards.
@resadisa40138 жыл бұрын
Bartosz Matejkowski Thank you
@ehsanlee71108 жыл бұрын
+Bartosz Matejkowski hi i have question regarding this video, is that permanent acrylic or temporary ?