HOW to Build Satsuma in My Summer Car 2024!

[@ljubogrubisic9729]

SEATS + DASHBOARD 0:28 Rear Seat: 9mm x 2 0:39 Front Seats: 9mm x 4 each seat 0:58 Dashboard 10mm x 2 1:19 Dashboard meters (add clock gauge from the garage shelf) 7mm x 2 1:44 dashboard meters installation to car 6mm x 2 REAR SUSPENSION 2:03 Trail arms (Left and right) 2:17 Trail Arm Rear Left 12mm x 2 2:20 Trail Arm Rear Right 12mm x 2 2:23 Coil Springs 2:29 Use the floor jack to raise the car from the rear 2:32 Shock Absorbers 2:41 Top Shock Absorber Nuts, 1 on each side 12mm x 1 2:46 Bottom Shock Absorber Nuts, 2 on each side, 6mm x 2 2:53 Drum Brakes 14mm x 1, 1 on each side FRONT SUSPENSIONS 3:12 Subframe: 10mm x 4 3:30 Steering Rack: 9mm x 4 3:38 Steering Column: 8mm x 2 3:55 Wishbones (Front left and Front right): 10mm x 2 each 4:04 Spindle (Front left and Front right): 12mm x 1 each 4:23 Steering rods (Front left and Front right): 12mm x 1 each 4:40 Disc brakes (Front left and Front right) 4:47 HalfShaft (Front left and Front right) 4:50 Disc brakes (Front left and Front right): 14mm x 1 each 5:00 Struts bottom (Front left and Front right): 9mm x 4 each 5:15 Struts top (Front left and Front right): 10mm x 3 each 5:25 Sturs bottom (Front left and Front right): 12mm x 1 each ENGINE BLOCK 5:33 Block 5:38 Crankshaft 5:43 (Main Bearing x 3): 9mm x 2 for each 6:03 (Piston x 4): 7mm x 2 for each 6:21 Head Gasket 6:25 Cylinder Head: 7mm x 10 6:47 Rocker Shaft: 8mm x 5 7:00 Camshaft: 5mm x 2 7:08 Camshaft Gear: 10mm x 1 7:17 Align Camshaft Gear by arrow 7:26 Timing Chain 7:28 Timing Cover: 6mm x 6 7:38 Water Pump: 7mm x 5 7:50 Crankshaft Pulley: 11mm x 1 8:01 Water Pump Pulley: 7mm x 4 8:10 Distributor: Screwdriver x 1 8:23 Alternator: 7mm x 1 8:27 Alternator: 10mm x 1 8:40 Oil Pan: 7mm x 8 8:54 Engine Plate 8:57 Starter: 7mm x 2 9:08 Carburator: 8mm x 4 9:20 Headers: 8mm x 5 9:30 Flywheel: 7mm x 6 9:40 Clutch Pressure Plate + Clutch Cover Plate + Clutch Disc 9:47 Clutch Assembly: 6mm x 6 10:10 Motor hoist: 10mm x 2 10:24 GearBox: 10mm x 1 10:31 GearBox: 7mm x 6 10:36 Inspection Cover 10:40 Gearbox: 7mm x 6 10:50 Drive Gear: 6mm x 7 11:04 Rocker Cover: 7mm x 6 11:17 Fuel Pump: 7mm x 2 11:24 Oil Filter: Scroll up INSTALLING WHEELS 11:30 Use the floor jack to raise the car from the rear 11:31 Wheels (Back left and Back right) 11:37 Wheels (Back left and Back right): 13mm x 4 11:50 Use the floor jack to raise the car from the front 11:51 Wheels (Front left and Front right) 11:52 Wheels (Front left and Front right): 13mm x 4 INSTALLING IN CAR HOOD 12:04 Fuel Strainer: 8mm x 1 12:15 Clutch Master Cylinder: 8mm x 2 12:21 Brake Master Cylinder: 8mm x 2 12:30 Clutch Lining: 7mm x 2 12:40 Brake Lining: 7mm x 11 13:00 Radiator: 7mm x 4 INSTALING ENGINE INTO CAR 13:25 Putting the engine in the car 13:52 Installing the engine: 11mm x 3 13:58 Motor hoist: 10mm x 2 REMOVING ELECTRONICS 14:09 Electrics 14:20 (Spark Plugs x 4): SparkPlug Wrench 14:30 Electrics: 8mm x 2 14:37 Alternator Belt (Pull it max to the right, scroll 2 times forward) 14:48 Alternator Belt: Screwdriver x 1 14:53 Battery COOLING 14:57 Radiator Hose 3 15:01 Radiator Hose 2 15:07 Radiator Hose 1 15:10 Radiator Hose 1: Screwdriver x 2 15:16 Radiator Hose 2: Screwdriver x 1 15:18 Radiator Hose 3: Screwdriver x 2 EXHAUST 15:24 Exhaust Pipe: 7mm x 3 15:39 Exhaust Muffler: 7mm x 1 GEAR 15:45 Gear Linkage 5mm x 3 FUEL 15:55 Fuel Tank: 11mm x 7 16:08 Fuel Tank: 12mm x 1 16:10 Fuel Tank Pipe AIR 16:14 Air Filter: 6mm x 2 GEAR 16:20 Geat Stick: 6mm x 3 BRAKES 16:30 Handbreak 16:35 Handbreak: 5mm x 1 Bottom | 8mm x 4 top STEARING 16:38 Stock Steering Wheel: 10mm x 1 WIRING REAR 16:50 Rear Harness Connector Fuel Tank ADD REAR LIGHTS 16:56 Rear Light (Left and Right) WIRING REAR 17:01 RearLight Right Rear Harness Connector 17:02 RearLight Left Rear Harness Connector WIRING FRONT 17:05 Main Harness Connector Front Lights Connector 17:14 Front Lights Connector HeadLight Right 17:17 Front Lights Connector HeadLight Left 17:22 Main Harness Connector Ignition Coil 17:27 Main Harness Connector Radiator Fan Connector 17:34 Main Harness Connector Positive Terminal 17:38 Positive Terminal Starter 17:43 Main Harness Connector Regulator 17:49 Regulator Alternator 17:52 Negative Terminal (Remove one bolt from starter) Battery Ground Connector WIRING INSIDE 18:11 Fusebox Instrument Panel 1 18:16 Fusebox Instrument Panel 2 18:19 Fusebox Ignition Switch 18:23 Radio Radio Harness 18:27 Light Switch Dash Harness Connector ADDING FLUIDS 18:37 Remove all caps 18:44 Add oil (M-OIL 10W-40) 18:50 Close oil cap 18:54 Add coolant 10L ? 18:59 Close radiator cap 19:04 Add brake fluid and clutch fluid PEDALS 19:13 Clutch Pedal: 9mm x 1 19:15 Break Pedal: 9mm x 1 19:20 Add fuel THINGS MISSED 19:32 Starter: 5mm x 1 19:34 Starter: 7mm x 1 19:47 Battery: 8mm x 2 TUNNING 21:09 Rocker Cover: 7mm x 6 REMOVE 21:24 Rocker Shaft(8 screws): Screwdriver x 8 (scroll all the way down then 7 scrolls up) 22:17 Rocker Cover: 7mm x 6 22:39 Distributor: Screwdriver x 1 REMOVE 22:44 Distributor: (scroll all the way down then 27 scrolls up) 22:39 Distributor: Screwdriver x 1 WHEEL ALIGMENT 23:26 Use the floor jack to raise the car from the front 23:30 Aligment (Front left and Front right): 14mm x 1 (scroll all the way down then 60 scrolls up) each 24:02 HalfShaft (Front left and Front right): 9mm x 3 each 24:15 HeadLight (Left and Right) put in light bulb 24:23 HeadLight (Left and Right): 7mm x 2 each 24:30 Place AFR Gauge on the Dashboard 24:40 AFR Gauge Dash Harness Connector 25:02 Scroll a little bit down and check AFT Gauge EXTERIOR 26:13 Front Bumper: 8mm x 2 26:20 Rear Bumper: 8mm x 2 26:40 Right Door: 10mm x 4 26:59 Left Door: 10mm x 4 27:04 Left Fender: 5mm x 5 27:13 Right Fender: 5mm x 5 27:26 Bootlid: 6mm x 4 27:35 Grille: 6mm x 2 27:51 Hood: 6mm x 4 { SEATS + DASHBOARD and REAR SUSPENSION is done by @wgns9645 rest is done by me }

[@martina6877]

Thanks man

[@Jaajo-qv5dc]

Pls tell me these are all real😬

[@monkeyconta]

thank you. sincerely. thank you.

[@Jaajo-qv5dc]

He forgor oil pan: 13mm x1

[@HyundaiAzera2012]

You forget the oil pan 13MM x 1

[@DJRS9045]

you don’t need the engine stand to put the engine in, if the wheels are on you can use the beer case and put the engine on top of it to get the bolts to show up edit: 25:36 that light is the alternator not providing enough power to charge the battery, it’s just cause the rpms were low so it’s not a big issue

[@ireallydontknow278]

What Is putting in the engine that big of an issue for people for me it's ridiculously easy probably because I've built satsuma fully about a dozen times now but I never even used the beer cases I know the spits of where the bolts go in and even then My summer car leaves a lot of room for error like that engine can be off by a lot and the bolts will still appear

[@DJRS9045]

@@ireallydontknow278 i’ve built the satsuma plenty of times too, but the beer case strat is good for speed running the car build, it’s really fast

[@ireallydontknow278]

@@DJRS9045 well idk about you but k don't have the wheels instantly I'm done with the car pretty much before I even go to the store it's just easier to do the whole thing In one instead of getting the wheels and using a Beeg case to hold it up

[@DJRS9045]

@@ireallydontknow278 i finish the engine, and the chassis before i put the engine in the car, then i go get the wheels and use the beer case in the house, it’s way faster

[@ireallydontknow278]

@@DJRS9045 I would say it's faster to Finnish the engine and just put it in it's easy to do and way faster trust me if we were to Speedrun and we were done at the same time and you have to go get the wheels then I'll already have it in by the time you come back that's not a Speedrun that's losing time

[@emonea]

I got my car to work, thanks man!

[@el1ssgames]

typical w emo

[@angel_femboi2754]

I literally just finished watching the stream u made and put on KZbin lol congrats on the car 🎉

[@kames4182]

you are faster than me! i can't get my satsuma to work... :(

[@el1ssgames]

@@kames4182 what's wrong with it? Does it make any sound at all? I can help :D

[@kames4182]

@@el1ssgames i deleted my save like 30 minutes ago 😐

[@bouwmac]

I played KSP for a long time before i started my summer car and the background music in your video made me go crazy for a sec

[@WazzupTN]

sorry for that xD

[@joeyskudda4049]

Wazzup, thank you for these videos man just started the game n your playlist for my summer car has been very helpful, salute to you my friend!

[@WazzupTN]

I'm happy to help new players❤️

[@wgns9645]

SEATS + DASHBOARD 0:28 Rear Seat: 9mm x 2 0:39 Front Seats: 9mm x 4 each seat 0:58 Dashboard 10mm x 2 1:19 Dashboard meters (add clock gauge from the garage shelf) 7mm x 2 1:44 dashboard meters installation to car 6mm x 2 REAR SUSPENSION 2:03 Trail arms (Left and right) 2:17 Trail Arm Rear Left 12mm x 2 2:20 Trail Arm Rear Right 12mm x 2 2:23 Coil Springs 2:29 Use the floor jack to raise the car from the rear 2:32 Shock Absorbers 2:41 Top Shock Absorber Nuts, 1 on each side 12mm x 1 2:46 Bottom Shock Absorber Nuts, 2 on each side, 6mm x 2 2:53 Drum Brakes 14mm x 1, 1 on each side FRONT SUSPENSIONS I WILL EDIT MORE WHEN I HAVE THE TIME

[@WazzupTN]

if u finish it ill pin it

[@ljubogrubisic9729]

FRONT SUSPENSIONS 3:12 Subframe: 10mm x 4 3:30 Steering Rack: 9mm x 4 3:38 Steering Column: 8mm x 2 3:55 Wishbones (Front left and Front right): 10mm x 2 each 4:04 Spindle (Front left and Front right): 12mm x 1 each 4:23 Steering rods (Front left and Front right): 12mm x 1 each 4:40 Disc brakes (Front left and Front right) 4:47 HalfShaft (Front left and Front right) 4:50 Disc brakes (Front left and Front right): 14mm x 1 each 5:00 Struts bottom (Front left and Front right): 9mm x 4 each 5:15 Struts top (Front left and Front right): 10mm x 3 each 5:25 Sturs bottom (Front left and Front right): 12mm x 1 each ENGINE BLOCK 5:33 Block 5:38 Crankshaft 5:43 (Main Bearing x 3): 9mm x 2 for each 6:03 (Piston x 4): 7mm x 2 for each 6:21 Head Gasket 6:25 Cylinder Head: 7mm x 10 6:47 Rocker Shaft: 8mm x 5 7:00 Camshaft: 5mm x 2 7:08 Camshaft Gear: 10mm x 1 7:17 Align Camshaft Gear by arrow 7:26 Timing Chain 7:28 Timing Cover: 6mm x 6 7:38 Water Pump: 7mm x 5 7:50 Crankshaft Pulley: 11mm x 1 8:01 Water Pump Pulley: 7mm x 4 8:10 Distributor: Screwdriver x 1 8:23 Alternator: 7mm x 1 8:27 Alternator: 10mm x 1 8:40 Oil Pan: 7mm x 8 8:54 Engine Plate 8:57 Starter: 7mm x 2 9:08 Carburator: 8mm x 4 9:20 Headers: 8mm x 5 9:30 Flywheel: 7mm x 6 9:40 Clutch Pressure Plate + Clutch Cover Plate + Clutch Disc 9:47 Clutch Assembly: 6mm x 6 10:10 Motor hoist: 10mm x 2 10:24 GearBox: 10mm x 1 10:31 GearBox: 7mm x 6 10:36 Inspection Cover 10:40 Gearbox: 7mm x 6 10:50 Drive Gear: 6mm x 7 11:04 Rocker Cover: 7mm x 6 11:17 Fuel Pump: 7mm x 2 11:24 Oil Filter: Scroll up INSTALLING WHEELS 11:30 Use the floor jack to raise the car from the rear 11:31 Wheels (Back left and Back right) 11:37 Wheels (Back left and Back right): 13mm x 4 11:50 Use the floor jack to raise the car from the front 11:51 Wheels (Front left and Front right) 11:52 Wheels (Front left and Front right): 13mm x 4 INSTALLING IN CAR HOOD 12:04 Fuel Strainer: 8mm x 1 12:15 Clutch Master Cylinder: 8mm x 2 12:21 Brake Master Cylinder: 8mm x 2 12:30 Clutch Lining: 7mm x 2 12:40 Brake Lining: 7mm x 11 13:00 Radiator: 7mm x 4 INSTALING ENGINE INTO CAR 13:25 Putting the engine in the car 13:52 Installing the engine: 11mm x 3 13:58 Motor hoist: 10mm x 2 REMOVING ELECTRONICS 14:09 Electrics 14:20 (Spark Plugs x 4): SparkPlug Wrench 14:30 Electrics: 8mm x 2 14:37 Alternator Belt (Pull it max to the right, scroll 2 times forward) 14:48 Alternator Belt: Screwdriver x 1 14:53 Battery COOLING 14:57 Radiator Hose 3 15:01 Radiator Hose 2 15:07 Radiator Hose 1 15:10 Radiator Hose 1: Screwdriver x 2 15:16 Radiator Hose 2: Screwdriver x 1 15:18 Radiator Hose 3: Screwdriver x 2 EXHAUST 15:24 Exhaust Pipe: 7mm x 3 15:39 Exhaust Muffler: 7mm x 1 GEAR 15:45 Gear Linkage 5mm x 3 FUEL 15:55 Fuel Tank: 11mm x 7 16:08 Fuel Tank: 12mm x 1 16:10 Fuel Tank Pipe AIR 16:14 Air Filter: 6mm x 2 GEAR 16:20 Geat Stick: 6mm x 3 BRAKES 16:30 Handbreak 16:35 Handbreak: 5mm x 1 Bottom | 8mm x 4 top STEARING 16:38 Stock Steering Wheel: 10mm x 1 WIRING REAR 16:50 Rear Harness Connector Fuel Tank ADD REAR LIGHTS 16:56 Rear Light (Left and Right) WIRING REAR 17:01 RearLight Right Rear Harness Connector 17:02 RearLight Left Rear Harness Connector WIRING FRONT 17:05 Main Harness Connector Front Lights Connector 17:14 Front Lights Connector HeadLight Right 17:17 Front Lights Connector HeadLight Left 17:22 Main Harness Connector Ignition Coil 17:27 Main Harness Connector Radiator Fan Connector 17:34 Main Harness Connector Positive Terminal 17:38 Positive Terminal Starter 17:43 Main Harness Connector Regulator 17:49 Regulator Alternator 17:52 Negative Terminal (Remove one bolt from starter) Battery Ground Connector WIRING INSIDE 18:11 Fusebox Instrument Panel 1 18:16 Fusebox Instrument Panel 2 18:19 Fusebox Ignition Switch 18:23 Radio Radio Harness 18:27 Light Switch Dash Harness Connector ADDING FLUIDS 18:37 Remove all caps 18:44 Add oil (M-OIL 10W-40) 18:50 Close oil cap 18:54 Add coolant 10L ? 18:59 Close radiator cap 19:04 Add brake fluid and clutch fluid PEDALS 19:13 Clutch Pedal: 9mm x 1 19:15 Break Pedal: 9mm x 1 19:20 Add fuel THINGS MISSED 19:32 Starter: 5mm x 1 19:34 Starter: 7mm x 1 19:47 Battery: 8mm x 2 TUNNING 21:09 Rocker Cover: 7mm x 6 REMOVE 21:24 Rocker Shaft(8 screws): Screwdriver x 8 (scroll all the way down then 7 scrolls up) 22:17 Rocker Cover: 7mm x 6 22:39 Distributor: Screwdriver x 1 REMOVE 22:44 Distributor: (scroll all the way down then 27 scrolls up) 22:39 Distributor: Screwdriver x 1 WHEEL ALIGMENT 23:26 Use the floor jack to raise the car from the front 23:30 Aligment (Front left and Front right): 14mm x 1 (scroll all the way down then 60 scrolls up) each 24:02 HalfShaft (Front left and Front right): 9mm x 3 each 24:15 HeadLight (Left and Right) put in light bulb 24:23 HeadLight (Left and Right): 7mm x 2 each 24:30 Place AFR Gauge on the Dashboard 24:40 AFR Gauge Dash Harness Connector 25:02 Scroll a little bit down and check AFT Gauge EXTERIOR 26:13 Front Bumper: 8mm x 2 26:20 Rear Bumper: 8mm x 2 26:40 Right Door: 10mm x 4 26:59 Left Door: 10mm x 4 27:04 Left Fender: 5mm x 5 27:13 Right Fender: 5mm x 5 27:26 Bootlid: 6mm x 4 27:35 Grille: 6mm x 2 27:51 Hood: 6mm x 4

[@TheNightEpi5ode]

Thank you for the fast guide while also going into details you deserve more subscribers! 👍

[@WOTPOLSKA_PRO]

great tutorial, with all leatest parts to install and perfect tune! I passed 1st try for first time, didn't even have to go to mechanic! thank you! Also great phonk at the end of the video!

[@noigliff]

How? he never set the screws in the halfshaft?

[@bradkay1210]

Great job man I have been waiting for someone to go into full detail to put it together thank you keep up the awesome videos

[@WazzupTN]

Thank you brad!❤️

[@howie3601]

It's a thousand times easier to put on the gear box before getting the engine on the hoist. Thank you for the guide though. I really appreciate it.

[@dreadheart1441]

Thanks so much I been trying to put the engine on for 30-40 mins this help a lot ty

[@Venkai444]

Ty sm I stayed 1 hours trying to figure out on how to out it❤

[@Macraft37_official]

nice video, a tutorial is always helpful for the new players! Favourite youtuber = you! also a long video!

[@WazzupTN]

Yeah bro that's the goal!💪

[@Yaxzway]

great video man i js love how you went straight to building the car it really helped new sub

[@fran9722]

This is super cool tutorial, keep the good work up!

[@joesephbidomeus2134]

She's running, Thanks for the tutorial!

[@WazzupTN]

your welcome! ^^

[@spritecranberry4173]

Thank you for this tutorial, awesome work dude

[@WazzupTN]

your welcome!

[@pob1233]

Thanks my man❤. Got man car to work🎉🎉

[@WazzupTN]

ur welcome man!

[@Duirbhy6880]

Tysm for the tutorial! The part I hated most was the wheel alignment! 😂😂 OMG! so slow and making my hand sore 😂😂

[@WazzupTN]

Glad it helped!

[@lingor_3217]

Very good tutorial! The only thing that made me frustrated was that I thought I didn't need to buy any spare items for the preparations to start the build, because when I stumbled onto tires (Which I didn't have any) in the video, it was much complicated for me to continue building.

[@WazzupTN]

tires now you can find them in the abandoned house on previous update u can find them at home

[@lingor_3217]

@@WazzupTN Yes, I have done a research on finding tires in the abandoned farmhouse, but I have died to bee nest, which I had no idea about, plus with a perma death. I have tried a different tutorial and I got the car running for the first time

[@ireallydontknow278]

Yeah I'm still wondering why those wheels are in the mansion

[@blob0000]

Just install a mod that removes wasps

[@ireallydontknow278]

@@blob0000 kinda makes the game word I mean that's kinda like saying "hate building satsuma, install a mod that makes the car for you " it takes away from the game like I get it of it's adding something to the game but outright removing it is bad because then there's no point to anything

[@helpy6801]

proof that amistech games is genius

[@raihanshaikh1612]

Back in the year 2018 I made satsuma completely and at the end it started but the main problem was all the parts got dismantled completely 😂😂😂

[@mr.ziemniaczek6988]

thanks man it actually started!!!!

[@abdulmusawar2551]

AlhamduLLiLLAH! I made it. I spent almost 6 hours but finally i did it. Thanks bro for making such a nice video❤

[@WazzupTN]

yeah this game takes a lot of hours just to build satsuma but after it works thats the best moment ever

[@catgaming_f]

@@WazzupTN i can build it in like 45 min lol

[@WazzupTN]

pro mechanic! @@catgaming_f

[@thedeanypoohplayz]

for the halfshafts you can use the ratchet (same size) and its somewhat faster because you can scroll both ways still doesnt really make a difference, yet its slightly faster

[@Ghollix]

yo ty bro, i got it running first try with no issues

[@WazzupTN]

yoo glad to hear that enjoy bro!

[@dukethedragon9096]

Great tutorila, but all the jumps cuts can be a bit confusing especially when trying to put parts on the car

[@elkuxxx]

Thank you. Without this, i wouldnt have the engine assembled.

[@Moist-Potatoe]

You did great, video was very informative and helped me a bunch

[@WazzupTN]

im happy to hear that

[@kman12590]

very very helpful thanks alot man :D

[@WazzupTN]

your welcome!

[@xzef6969]

for anyone having difficulties putting engine to hoist skip to te next part with gearbox and after gearbox try again with the hoist

[@tamasgamer333]

put ön the gearbox first and its easy

[@xg1y]

if people are struggling with putting the engine on the hoist, add the gearbox and then do it as it levels the engine

[@Filtutix]

Thank you kind stranger

[@ireallydontknow278]

Do people put it on the hoist before finishing it usually I put my engine on the hoist once it's ready to go into the car meaning it's fully done or almost at least

[@xg1y]

@@ireallydontknow278 it's completely personal preference lol

[@mrteigen1932]

for me the bolts dont show up

[@xg1y]

@@mrteigen1932 yeah because it needs to be in a very certain position for the bolts to show, and the gearbox just levels it

[@XZR_5]

I think the rpm gauge can be found in somewhere in the repair guys junkyard (idk if its a junkyard)

[@DJRS9045]

it’s not i. the junkyard, it’s at the dirt race track along with the gt grille

[@soggybiscotti8425]

Can just order it from the magazine on the work bench

[@ireallydontknow278]

I think it can be found in the dirt race track if you go in the direction of the shorter direction so if you go to rykipohja then there's a dirt track and the rpm cauge is there

[@ErTitoTrollfay]

My satsuma works youre the best 💪💪💪

[@legandgamers1124]

Man idont know how to thank you for the guide the car runs perfectly

[@OgnjenMilic-b7g]

Love your videos ❤

[@WazzupTN]

I'm glad that you love them!❤️

[@Pazzzur]

yooo, one of the longest wazzup videos

[@WazzupTN]

True!

[@ziomal8317]

Thanks for help. I had to do this two times because my engine flew away XD

[@007Agentr]

It runs!!! Thank you so much!!

[@blob0000]

This is the best tutorial out there! The only thing that frustrated me was that i sometimes couldn't find the bolts, like the brake lining for example. Maybe for some bolts that are hard to find you can show where they are also.

[@gabicicaldau5769]

Good tutorial bro best ive ever seen short and good!

[@WazzupTN]

i'm glad that u liked it

[@Iloveboeing828]

Bro this helped me so much thanks

[@connorstoker-oh5hm]

Wazzup love these vids can’t wait for next upload would also think this video would be good with mon bazou

[@luksona8817]

Nice video bro❤

[@WazzupTN]

Thank you!

[@Trulataraba]

Nice video ❤❤

[@WazzupTN]

Thank you!

[@zxichi]

12 minutes into this video i ran out of food and took the ruscko to the shop. on the way i stopped to get out for the alcohol inspection and got hit by a car 41.4 hrs and never built the satsuma

[@WazzupTN]

too much stuff happened behind that 12 minutes xD

[@dead-branch]

scroll to screw

[@larabalboa9404]

Thank you wazzup i easily built the car

[@therealjukismo]

i was just finished until i realised i hadn't put the halfshafts lol. probably consider making your clips longer than 0.5 seconds, could help a little. other than that amazing tutorla

[@stunt-]

That one part when he says ‘and bam’ 🤣🤣😭

[@Theguywholoveaviation]

Hell yea i got it thanks man

[@mrquackalot553]

Got up the wiring part, saw it was late IRL, went to sleep in-game to save so I can continue the day after. And that's how I found out the game DOESN'T save when sleeping, but rather when going to the toilet. Back at square 1 we go!

[@lucid5183]

So after 30.8 hours I finally go to take it on a ride and the engine goes straight up into flames 😀👍 Good tutorial, I had some issues with the game itself where I couldn't fill the radiator all the way and my thingy mabob just turned black out of nowhere which is most likely the cause.

[@WazzupTN]

msc is buggy sometime, btw did u tune the carburator correctly?

[@lucid5183]

@@WazzupTN Probably not, will try again but the ignition has completely stopped working which is another ballache. Great tutorial tho, well explained and detailed. Thank you for making it

[@KoderTV]

bro who the hell figured this out on thier own is a chad

[@yanlixxxd8521]

Its not that hard bruh its like building a car irl

[@bokexd3173]

Thanks this made me play the game

[@WazzupTN]

Enjoy bro!

[@julian-y1e6w]

very good tutorial worked for me 1st try

[@dyrbr69]

help my engine doesnt turn off i have to stall it for it to turn off but my satsuma works thanks i got to see everything i did wrong edit: i died and lose that car

[@David_DD3]

Nice Video

[@WazzupTN]

Thanks!

[@maxgrandell2571]

IT OWRKS DUDE!!!!

[@i8lvm_1738]

ur english is englishing well these days man 🔥

[@WazzupTN]

Thank you bro!😍

[@i8lvm_1738]

@@WazzupTN np amigo

[@WazzupTN]

EP 80???

[@OgnjenMilic-b7g]

Yessss

[@markusleo7923]

ofc

[@izmgamplay9987]

Yes pls and use mods

[@Braca_bajric90]

Of course

[@ThatLiving_Microwave]

Yeeeeeeeeaaa

[@mathewkaiser7667]

Great tutorial bro but how do I pick up a spanner

[@Pevettibomber]

First press f2 to go to build mode and then pickup the right size from the spanner box

[@veon333]

Muy buen tutorial!! Gracias

[@SpankfireX]

TIP: When putting the engine into motor hoist attach the gearbox first

[@Bekosanteladze]

thanks man my car worked and i got "it runs" achievement

[@brycen1037]

my car got stuck on the freaking roof while pushing it, and it was twerking previosly this game is amazing already

[@WazzupTN]

damn... x)

[@vilkke9700]

My motor is in the wall😭

[@King-Tracks]

if you HATE THE ENGINE HOIST just dump the engine in the car an install it. thats what i did

[@The_Master_Of_Bytes]

I was wiring and the wiring mess literally disappeared, I made the sad mistake of saving after they disappeared and now that save is rendered useless

[@WazzupTN]

u can get it back with msceditor

[@ireallydontknow278]

If things clip through the ground they will actually reaper at a junk yard near I think the entrance to the highway if you go through the shorter way clipped things will always reaper there and this goes for any item so it's snot lost its just at the junk yard so you just gotta go there

[@hamsternn]

tysm man it runs still working on the video at 25:02

[@hamsternn]

done now tysm for the tutorial dude!

[@WazzupTN]

your welcome

[@hamsternn]

yo brother, did you ever put oil in the oil pan? it was either me that just simply forgot to, or you forgot to in the tutorial. thanks anyway man i fixed it now!@@WazzupTN

[@hamsternn]

nevermind dude, that didnt fix it. can you help me? my car keeps overheating

[@WazzupTN]

def needs coolant or new radiator @@hamsternn

[@DanylTheLegendzBoi]

Wazzup! Why you don't use a Ratchet set cuz he tighten faster? first go browse parts and click ratchet set and when you arrived teimo's shop put in the post and wait another day teimo will call you and post is arrived and here you got a ratchet set!

[@dogevskyyy]

i've been infinitely scrooling on 23:44 and IT STILL DOESNT STOP. COMEON MAN HELP

[@WazzupTN]

yeah it doesnt stop but u can see it its not moving when its not moving do the opposite 60 scroll

[@pankot5733]

You are hero man ❤

[@Vidus15]

It runs perfectly, but it chokes a little bit at the start, but it's drivable.

[@DanylCommentary]

I tried to tighten the battery I started to Positive terminal and starts to fire

[@Haj-Mmd00]

Nice 😊

[@Ryuma_MO]

Followed along every point and the car was working. I did one little test run around the house and then followed your tuning steps and the next day it will start but as soon as I shift gears it moves a foot and then makes a bang noise then it stops completely.

[@hweenor]

probably because the car needs to warm up, and the car is stalling. a simple fix is to hold down the clutch and rev in first gear, then release the clutch.

[@WazzupTN]

u gotta tune the carburator@@hweenor

[@ireallydontknow278]

That's the fuel air mixture being off if it is you need to buy the fuel to air mixture cauge in the magazine it's the one that costs like 800 mk and it has the colors red green and yellow on it if you're trying to find it that thing shows you the fuel to air mixture and for a good fuel to air ratio you need the cauge to show about 14.9 At least that's what worked for me as the car also used to bang and then once that was done it no longer banged obviously to change the fuel to air mixture you need to use the screwdriver on the flathead bolt in the carburator it's on the inside part of the engine meaning it's hard to see but twist that until it shows 14.9

[@Saad-o8e]

My car started 🎉🎉🎉

[@ZanderonKerman]

When I was at the start of the wiring mess, the battery fell out and wouldn't go back in, so I had to restart all my progress.

[@MorsBieg]

what?? battery always goes back

[@ireallydontknow278]

The battery might fall off a couple times but if this is a problem connect the battery connections first but then again you shouldn't have the battery in anyways while wiring the car because if you do the the whole thing will catch fire

[@brycen1037]

this is a game to test patience on low patience having people

[@WazzupTN]

true...

[@brycen1037]

@@WazzupTN yea thx for the video, but the game failed to meet my request to FREAKING COMPLY

[@Wiliam_The_Comrade]

Maybe its just me but every time I try to put exhaust pipe on it just falls off, any tips?

[@WazzupTN]

it happens to me too, just keep attaching it until it gets in

[@ireallydontknow278]

Lift the car up or wait until you have the wheels in it makes it easier as the car isn't on the plain ground anymore

[@khharkivsky]

sick tutorial brah

[@JohannCee_WinterArc2024]

Bro... i cann pick up a spanner. it just takes the whole box

[@jakubjuscak3154]

Just press 2 on your keyboard to get tool mode

[@Sandyprogamer2]

i love the start of the video(SAMIR YOU ARE BREAKING THE CAR) keep up the good work bro almoust 60k subs.

[@WazzupTN]

Thank you bro!

[@RENATINHOGAMEPLAYS1607]

Death 1: When i was building the motor,i invented tô pee in The TV,and i died and lost all progress Death2: I died of Hunger and lost all progress Death3:Tried tô fix the energy of my house and i was eletrocuted Death4:Green car Just ran over me Death5:Just passed the train line and the train ran over me

[@WazzupTN]

bad luck always keep an eye on the bars

[@ireallydontknow278]

Just turn off Perma death makes this game from like dark souls levels of hard to like only up levels of hard

[@semii2744]

I only had the fuel left.... and i was gonna flip it to the right side, but it was too close to the ground so it fell trough the world, where can i find another gas can??

[@WazzupTN]

def u gonna find it in the junkyard

[@Novity_Vibez]

my car so happy the windshield popped out

[@ianelmquist8642]

W video thank you

[@WazzupTN]

Your Welcome 😊

[@Cablebet]

Thank you so much

[@934strawberryfields]

12:50 where tf are these bolts?? edit: i found them they're at the back

[@dudeopolis9520]

I followed this completely and my car doesn't actuall run 😂😂😂😂

[@WazzupTN]

send me ur save game on discord & let me check the issue

[@dudeopolis9520]

@@WazzupTN thank you but I have no idea how to do that man 😂😂 not doubting your mechanical abilities I am just a clown 😂😂

[@ABaller-le1gj]

The timing might be bad

[@Filtutix]

Tune it

[@Somedudeidk-kt3gf]

I dunno im a noob

[@frayzz1]

Siiiiiick

[@GimBoob]

I did the tutorial step by step Sept nothing lights up I can't even start it I uave spent the last few hours on this can anyone help😢

[@WazzupTN]

check battery

[@Luxumaattori]

Same😢

[@patriklehto9821]

satsuma doesnt start anymore, before it started and made a clicking sound then turnt off. did everything like you

[@stakedz]

Day 14 of asking you to play live for speed again

[@aironasgarnys5885]

it dosent let me put the inspection cover 10:39

[@WazzupTN]

did u untighten the bolts first?

[@DaleC0oper]

bro you're not supposed to fully assemble the engine before hanging it on the motor hoist, took me two hours to do it the same way you did and almost gave up..had to use the green gasoline can as a support cause the beer case was too high for it...

[@WazzupTN]

i was trying to make it a lil bit realistic xD

[@DaleC0oper]

@@WazzupTN lol its just that its easier to mount it on the motor hoist while the engine still has a leveled surface, anyway just lost my save..died in the most buggy way possible backing up at half a mile per hour, didnt knew permadeath was thing ;-;

[@WazzupTN]

damn....i always backup my save game @@DaleC0oper

[@Elliotocompany]

no way that you made the whole car in 28 min

[@WazzupTN]

Speed run

[@ireallydontknow278]

It takes way longer than that it's just editing magic trust me man it takes like an hour to go to the store and even get back if you use the tractor

[@Random_Car_Guy]

I got shocked to death after installing the afr gauge💀

[@WazzupTN]

oh no x)))))

[@ireallydontknow278]

Take the battery out If the car makes sparks then the battery is connected The easiest way to fix that is to just take it off when you're wiring stuff Also when removing the battery it has the same thing when removing it you go for negative first and when putting it in you go positive first if these are not followed the car will get set on fire obviously if you don't have a fire extinguisher it's pretty much over for satsuma

[@Random_Car_Guy]

@@ireallydontknow278 Thanks man but now the car starts and revs but it wont shift even if all the fluids are filled and the halfshafts are bolteds, also the shifter linkage.

[@ireallydontknow278]

@@Random_Car_Guy could be an issue with the gearbox if it is with the gearbox the it's gotta be a restart as the gearbox is one of the most expensive items in the game (I think it costs like 3000 marks or at least somewhere in that ballpark)

[@Random_Car_Guy]

@@ireallydontknow278 Yeah if thats the case im taking a break because going to town with the kekmet on a new save is painful

[@G2logical]

people who tightened the break disk before putting on the halve shaft

[@Altezza_This_Guy]

i died not even being half into the tutorial of a goddamn wasp

[@CovertEditz]

same 😭😭😭😭😭😭😭😭😭😭

[@huugojaeevee]

Brooo when i was putting the engine on the car from the hoist, the whole engine just disappeared😞

[@WazzupTN]

MSC bugs......

[@huugojaeevee]

@@WazzupTN im so sad bro i spent so much time on it😞

[@Siru-kissa]

Note for me 03:30