"WE ARE PUZZLED"....Battling An Evil Car at Silver Dollar Speedway

[@sportmod11p63]

Carly is a beast! Jumped on the wing before the car even stopped and finished her off with a couple high knees!!! Atta girl!!! Keep diggin bud!

[@michaellukasiewicz9683]

A Beautiful Beast 🏃‍♀️

[@farmbilt]

Carly is an amazing young lady!!! Much respect to her..

[@abpob6052]

@7:22 Carly assaults the bent wing! That was amazing! I raced for many years and the baseline car should be driveable almost anywhere. Sounds like you may have a bad torsion bar or mistakenly got them reversed. It happens. If I had this issue I would tear the rear end down at the hotel and rebuild it with new torsion bars, bushings and shocks. Reblock, resquare, get the torque tube right. IF that doesn't work then check the frame for cracks when you get home.

[@hdr_night4306]

Hey man,there's a track near chico. It's my home track,Marysville raceway. Would be sweet if you came. Lots of fast guys.

[@motomechanic5711]

Carly is amazing! Got a good pit crew! Good job carly!

[@ronrynearson8737]

Some are just like that can't figure out what is wrong. Stay strong and keep positive. Your young and we all love watching your videos.

[@racerdad6455]

You had your hands full with the left front 1’ off the track! Let’s Go 18t🏁

[@davidmikulski52m27]

In my limited experience, when the car was unpredictable and evil like that, it was a bound up torque ball/rear end (out of square) or bad/incorrectly set shocks. It seems unlikely you'd be THAT far off on base set alone.

[@williamtahran2033]

Sorry you had a bad night, but I love your attitude kid! Never give up. I know you have Flyin Bryan and your dad working on the car but you could always talk to Rod Tiner he won't steer you wrong. Anyway I enjoy your videos and always look forward to watching them. Thank you and good luck 👍.

[@shanedevlin6097]

Do you guys have a shock dyno to make sure that you don't have a shock problem

[@T1C45]

Just my opinion but it seems as though your changes from heat to feature got rid of some of that push, however not getting the forward drive and skating towards the wall after throwing it in hard to get the back around seems like a shock adjustment in my opinion. I could be wrong, totally wrong for that matter cuz I am not the one feeling what's going on behind the wheel. On a different note I know I always say it but remember your real solid fans are going through the ups AND downs right along with ya, we ain't going anywhere. We have faith in John, Lil' Sis, and You Tanner💪👍

[@davidsallas7049]

Smart move bring it in figure it out no need and taking a chance in a B main if it’s not working. Seems most crashes are in the B main

[@fresnokidsr]

Hmmm you know how it seemed to me like the 410 liked that chassis alot better than the other chassis meaning you ran better with the 410 in this chassis. Well in the chassis that broke the tube I noticed that it ran better with the 360 in it instead of the 410. I wish I knew more about the chassis and the set ups and the engines to know if you have to set the car up differently for each engine. Ok I just realized that I rambled on and probably didn't make any sense at all. Sorry. Maybe my rambling gets y'all to think of the problem from the perspective of what is different in the set ups between the two engine sizes. Anyways thank you for another great video showing the ups and downs of racing. Have a good one. Have fun take care

[@Sev_Auk]

The Saturday rain-out may have been some good fortune for you guys. Time to regroup and not break any more parts :) Better luck next weekend!

[@CurtisBarros]

Check the right rear bar it might be a dead bar? RR Shock? it just seemed like it didnt have enough right rear weight in it... Just a observation somethings to look at. I hate being a crew chief...When there's a lot of other variables involved and im not there. Just some ideas to consider. love the Videos keep them coming!!

[@bob8359]

Looked like the right rear was digging in once you washed speed of mid corner, raising right rear presser just a little may of helped.

[@unclebones2488]

@7:30 best part on it like a spider monkey Carly I love this Gurl

[@Greyson.Kyler429]

I don't have any clue on what could be wrong with the 18T. Some people have mentioned that you've been running on the right rear tire all season maybe that could be your problem or part of the problem but I hope y'all find out what's going on and go win a race.

[@magillanz]

a bar binding up? rear end squared up right? Bound up drive line? I am sure you have checked all that? You got a shock dyno yet?

[@jeremy8169]

Raise right rear ride height, in the opening video the right rear shock is hopping up and down . Good luck .👍

[@billkahl1147]

Keep digging, you folks will figure it out. Did Carly run, and if so, how did she do? Also, how's the silicon fix on the rear end holding up?

[@JT2239M]

Tanner could definitely run PA Speedweek this year in the Premier Auto Works Jerry Parrish owned 21. They are literally putting anyone in the car. The only thing is he would have to being his own crew/Crew Chief.

[@jenniferkbowman]

omg HUGE push at 5:13 I`ll have to ask Brian! to me do you think it was rolling up on the right front?Kinda looked it.. oh ya BTW I use to tell my Father racing our sprint car is like dancing with the devil, now to check out day two :)

[@tfatcher]

Take a deep breadth. It's a man and machine thing, sometimes the machine wins but man will prevail. ✌

[@carolinaghost5451]

keep on pushing forward

[@howardwest2707]

Do you have a sprung right rear bar or does it feel like it has no compression on the right rear? See ya carrying the left front like it's getting over hard but isn't rebounding back.

[@ReachOutToWilliam]

You may have a bad chassis. Time to carefully inspect, magnaflux?, stress the frame and look for cracks. It might be out of square, as well. You can't just measure the front to the rear axles. You have to check the whole chassis with measuring devices like a tram gauge and/or laser tools.

[@b.rocket]

Much love to you bro

[@rogervastagjr5669]

Keep ur head up bro

[@kellycoffey2801]

Tanner, was this weekend the most “cluster” race weekend of your career?

[@452149]

Crew chief Brian crockett as in placerville speedway champ" flying" Brian crockett ? He was one of my favorites as a kid.

[@melabshier5812]

Wondered what the problem was Kiddo when watching on Flo. You didn't name the car Christine did you..lol. ( Movie reference for those who don't get it.)

[@deanbanks3392]

Shock settings, frame alignment, left front/right rear--i can't say what your mechanical problems are. I would have liked to see you finish the B Main, you might have realized the problem. Pushing through sometimes helps your psyche'. Don't give up, we're all pulling for you.

[@jamjams690]

I probably would've put a round an a half in the right front and a harder shock and maybe a half inch spacer on the left rear

[@kensnyder9372]

SHOCKS ..........Have you got a shock dyno in your hauler ? See if some one will let you use there's......................

[@daltonwoodle2582]

Tbh I think u should bring the 18t and the 22c and see what the 22c is made of with u driving it, just my opinion tho, since u have more experienced

[@daltonwoodle2582]

Also it looked like u needed a harder shock, the shock looked way bad during the night, I would put a stiffer shock on the RR

[@jeffomspaugh6691]

The rear end housing may be slightly out of square. Something caused it to crack.

[@jerrycampbell6181]

Find a old school driver/mechanic 40yrs back an ask what they did ? The new shocks are they adjustable or just tuneable by internal valving ? At any rate , I have the upmost confidence that THR figure it out ! No 2 frames are the same , they have their own soul an you have to figure out what makes it the happyest an then it will fly ! GOD BLESS Y'ALL !!!

[@adamsracing400]

I love the vids keep up the work

[@MadkinsRacing]

Did a right read bar go soft on you?

[@sparkyofsocal]

@@MadkinsRacing Or did they get mixed up, left right

[@boblemon8337]

And scale it. !!!

[@danielweiss144]

Tanner put it behind you and your sister is Amazing

[@useful123forege9]

bro is having a rough season, best of luck for the rest of the year

[@ronnie100393]

It seems like the rear end is not in the correct position????????

[@johnmcmillendarkside6motor73]

Hang in there Tanner y’all will get it figured out get back to the standard set up and go from there

[@ollysfishing4231]

joys of motorsport! best you can do is regroup and have another crack!

[@kurtstoutner2935]

Try 1025 right sides and 1000 left side

[@markchavesjr555]

Right rear bar is probably dead. We’ve had that happen before

[@JimETeez]

That sticky-icky black clay.

[@craigmcmullen231]

My guess would be the rear is out of square, a bad shock, or bad bar. Something has got your car bound up.

[@482racing]

Car looks confused a wing car that identifies as a wingless sprint car. Rear shocks switched 🤷🏻‍♂️

[@ZrubekFamily]

You were looking a lot better in the B, gaining spots. Didn't seem to be pushing so bad.

[@Al_Nunnery]

Hello Hey Hi and Howdy 👋 Team Holmes...... Peace ✌️ Love and 18 Wheelz Y'all.....

[@showtydurtman]

That's me thinking outside the box!!💩👍

[@gen2-x364]

Shocks???

[@davidgreer8752]

You have been stuck on that right rear all season go back and watch all your videos

[@RegularJoes]

55k subs 👍👍

[@Kronik24971]

Dam your having a rough trot lately sure you haven't run over a black cat recently, chin up keep battling.

[@Scramblerkidd]

The sound of frustration. Keep trying!

[@burlapX]

👍

[@kurtstoutner2935]

Well go back to basic set up 3 3.5 0 the bird cage

[@jasonlong3929]

Yea something is bound up hope you found it

[@rickycox6111]

Sorry Tanner. Tough to see . You'll get it nose to the grindstone.

[@burlapX]

i wonder what kind of racing surface you could build with this thing👉 kzbin.info/www/bejne/hZm1pmqAf6iNiK8 .

[@joealbert7773]

When a car isn't right it is a bear to drive; not fun.

[@showtydurtman]

CONTACT PAUL SILVA!!...NOW!🤓👍🏁🏁🏁

[@Spider-Man-my3hp]

Tanner you need some red rims to match your car

[@ParticipationTrofee]

Soil types. Soil types.....

[@dylanpostier3752]

Why is your RR so soft? Are you trying something new?

[@boblemon8337]

Lazor not labor

[@duanecreativemachine]

Chasing an evil car sucks. Being you had the rear out something must not be square. Either that or that rr bar has completely failed.

[@boblemon8337]

Nope never chase the car. Totally reset it and start over

[@boblemon8337]

Put a labor to the chassis and see how far off you are. I promise you are

[@Slotmachineking567]

Don't think it the car you down talk your car everytime you can't drive sorry but true

[@raymond3803]

Admit it! You're having a horrible season. I'm telling you ......... Screw those KCP cars. Go Chinese. Chinese have a better understanding of sprint car racing. If you have to drive a US made car ....... Run a Schnee. Order a non-down-tube from Brian Schnee. Only car not built in halves. Has a true roll bar behind drivers back.

[@chacehenderson9800]

No the f they dont

[@chacehenderson9800]

Look at Brad sweet Carson macedo an Sheldon haudenschild they are winning tons of race using American made cars I don't even think they have Sprint car racing in china