We assemble the Rotary BUT.... | Mazda RX-8
Рет қаралды 39
Күн бұрын
@dgmdgm7271 10 ай бұрын
From Racing Beat site : "When assembling a Renesis engine it is critical to install the engine rotors in their correct housing. To determine which are the "front" and "rear" rotors, place one rotor in front of you, flat on the table, gear side up. Rotate it until one apex seal is pointed "up" (away from you) relative to the other two. If the small "chamfer" on the edge near the apex seal is to the right of that seal, that is the "front" rotor - as situated in the stock car. If not, this is the rear rotor." May be isn't necessary to take a rotor out , if you are lucky 😅.
@dgmdgm7271 10 ай бұрын
Other things : check the oil injector , often they loose the vacum ..Are expansive anyway but...
That Little Puff
Рет қаралды 24 МЛН
The Ketchup Juicer
Рет қаралды 533