We Bought This Abandoned Yamaha Banshee 350...Will It Run??

[@bearkreekboys]

Make Sure You All Follow Us on Instagram (Link in Description) and Have Notifications On!

[@mr.statefarm9525]

Hell yeah!! 🤟🤟💨💨🚀 Can’t wait to see the build series! Great buy! My guess on the purchase price is $1350. I had a tricked out banshee that I sold for $5000 last December. Now I have a Tecate 4, but you won’t regret buying that. Great thing about banshees is that parts are very accessible, and there are many many different mods out there for them.

[@bearkreekboys]

Definitely! Hope to make it look nice and run again!

[@jordansbikes819]

Looking forward to seeing this done👌👀 nice buy lads

[@bikelifewiz8144]

Typically a stock banshee would have 120 and over on each cylinder , I would personally open her up and check top and bottom end and make sure everything is in good conditions, then I would ditch the boost bottle , get tors delete forsure and tune her up , that’s litterly all you have to do and you would have a solid bike , remember to replace all fluids with new fluids.

[@bearkreekboys]

Definitely! I have ordered a bunch of stuff and will be doing some more work to it soon!

[@Hanky_Bannist8r]

Top end rebuild for sure boys. Mine ran around 130psi in warmer temps here in Commiefornia. I prefer a wet test with a cap full of premix down each cylinder a dry test doesn't really make an accurate reading. I'm gonna say $1,150 was the snag on this one ?

[@bearkreekboys]

I agree! Thanks for the info!!

[@dennisbrooks186]

Banshee builds are where it's at. And hey, u should remove those plugged filters and re try the compression test. And also put a few drops of oil or wd 40 down spark plug hole. Help seal them dry cylinders. Then test em out. Might help ya out idk. But deff looking forward to banshee build!!!! I'd say 1500 u paid?

[@bearkreekboys]

Appreciate the support! Just made another video on it make sure to go check it out! Thanks!

[@garyspiegel6901]

Banshee usually have between 115 - 120 lbs per cylinder, im not too sure if that will even fire decent with that low of compression

[@bearkreekboys]

We actually did get it to start off camera with some gas down the plug holes but I do agree very low compression I'm thinking the rings might just be a little gummed up from sitting so I'll stay optimistic otherwise top end rebuild for sure

[@garyspiegel6901]

@@bearkreekboys that's awesome man I wouldn't think it would fire decent with 100lbs max lol otherwise a top end rebuild isn't the end of the world.

[@bearkreekboys]

Yessir for sure. You'll have to take a ride on the Enticer if we get to Cecil when the ice is still good!

[@garyspiegel6901]

@@bearkreekboys that would be awesome man!! I don't have any time during the week but weekends are always open. Those 300's rip tho for sure. As long as temps stay a little lower the ice should last a while

[@jcproductions89]

Boost bottle is bad, your cabs still have tors on there so those need to come off.

[@BostonBanshee]

This bikes 3500 here on the east coast as it sits rollers are 1800+

[@doitalldavey8788]

Nice Find

[@calvinneal9803]

How much were you able to buy the banshee for ?

[@offroad4x4nhlife45]

nice!!

[@just_in_time5518]

nice! $1300?

[@jcproductions89]

It’s goin.cost atleast 4k to get it right .

[@jcproductions89]

130 for compression. Top end $1000, powder coat $700

[@bearkreekboys]

Top end is 120$ I do all the work myself. Powercoat is around 150$ all other stuff is less than 500$

[@jcproductions89]

@@bearkreekboys top end for $150 lol where ? To get the cylinders bored next size up professionally is $400 and wisco pistons is like $200

[@bearkreekboys]

eBay kits new cylinders and everything 120$ been good to be for many rebuilds

[@Gopedhitta954]

3800

[@jcproductions89]

You said parts are cheap lol who lied to u.

[@alimendez7508]

$3200

[@jasonhendrie5411]

1200$

[@axeljimenezr]

pleas sell it to me

[@offroad4x4nhlife45]

900 bucks

[@theoneandonly2421]

$1500

[@garyspiegel6901]

You prolly paid like 1425$

[@bearkreekboys]

it was 1400 right on brother

[@garyspiegel6901]

@@bearkreekboys damn bro I guessed 🤣