We Have Our Blown Hemi in The Durango and its a Rush to Finish!

[@TokyoCraftsman]

Never a dull moment. I hope Bobby enjoys his family getaway, he has earned it! Cheers from Tokyo!

[@Son_of_Man1]

Relay conversion electrical 14ga to 2 ga for amperage draw

[@stevemuller82muller65]

Tom, you are going to have to teach Aiden how to use a soldering iron man 😂🤣 you got to tell him " butt connectors are for emergency repairs primarily". Keep up the great work fellas 😁😎🤙🇺🇲 much love from Pennsylvania 🥳

[@wobblysauce]

Yep, 'Can wire' vs can wire.

[@michaelloth5870]

Saint Bobby is now making headers!!! Unbelievable!!! Good luck and don't forget to eat and sleep now and then!

[@Airsofthelpvancouver1963]

Hey Tom, I am not trying to be rude but I would like to see more of the building process and I learn better hand's on then verbally. I enjoy your channel and like the crew and thats especially why i bring this up is maybe videoing your shop mates while they work simular to how other similar channels do cause none of them just talk but they do thanks buddy.

[@marklottero5345]

Loving how that Durango is coming together! Looks bad ass and it should be a decent driver

[@keefespencer1173]

Yea I'm hoping that it runs as good as it looks and I hope it lives up to the hype that they have been putting on it all this time

[@ImpHalla66]

Updates are awesome. Thx Team!!

[@kevinmcmanis7335]

You guys are amazing!

[@karlsracing8422]

These gen3 Cars are going to be nuts!

[@vehdynam]

Bailey Racing races towards yet another deadline ! Good to Bobby getting "some " time off....lol. Thanks for the update.

[@mr_mongo7228]

You better take good care of Bobbie you guys would be totally screwed without him! Of course you have a great crew there and they all pay their dues that’s for sure…..🍻

[@nhra7110]

VERY happy to you guys staying with Gen 3 Hemi's!!

[@buickgnx007]

Durango gonna be 1 bad ass suv!! Can't wait for the reveal !! Is any Durango merch coming out??

[@FastSS02]

Car stereo distribution block to go from 2 gauge to 14 gauge!

[@jeromewestwood5453]

We get to see all bobby ej and Adrian work I think bobby should grab the camera and follow Tom around for a day. Probably just spend all day doing his hair. All joke enjoying the videos

[@owggarage723]

Ayden, you could use relays to connect the different gauge wires together. Just use the small gauge wire to actuate the relay.

[@krazyphucker369]

That's the solution fused 2 ga from the battery to a relay 2ga out to device 14 ga to control the relay has to be high enough Amp capable for the device as well as the fuse

[@ThatandCo]

good luck guys

[@tophand1918]

That's the loudest air compressor ever

[@keefespencer1173]

Should've just bought an Indy Cylinder Head built Hemi crate engine and put that in the Durango and they have different options for different applications of crate engines that you can buy from their website all for decent prices too

[@sheldonhall4572]

Hey man been subbed for a minute but I really dig your graphics design teams work on all your drag cars. It always looks good.

[@kylestubblefield3404]

Aiden, brother, it sounds like the module is supposed to fire a relay

[@MrJackinthebox46]

Hoosier has a 33-18.50 15 street strip tire!! They hook great!! and look great!! but so does M/T 33 18.50 15 street ET

[@Michael666CA]

16" rim

[@CrystalWhiteLX50]

Tom, you have one of the best wiring guys right down the road from you in Auburn Hills 😂

[@toddclark332]

Aiden can handle take that black 57 and make it just like Aiden

[@kennypasco5799]

These projects are amazing but what happened to the screw blown nomad gasser idea

[@FastSS02]

It's a 2 door post, not a Nomad. Steve Morris rebuilt the engine and changed to roller rockers and dynoed it at 590HP NA

[@FastSS02]

I had to go back in the way back machine over 2 years ago to find what you were talking about. I thought you were talking about the gasser EJ drove, not this crazy blown, nitro Nomad from the videos 2 years ago. Quite surprised there hasn't been any updates since this was a major build that was quite far along back then. The original drawing that was shown was penned in 2019!

[@troyadams1076]

Good one

[@punksrfr]

“Lots of confidence from the wiring department”😂😂😂

[@logang2878]

What about the other wagon that's at Taylors shop?

[@DependableAutoTruck]

something i have always wondered why most of yall run a wheel with a large offset. i dont drag race any more when i did i always tried to run neutral offset. my reason was load to each side of wheel thinking less chance of flex. is flex in the center of the wheel not a problem. i would run wider diff and center offset. just wondering the reason being large offsets

[@douglawrence9616]

I just can’t wait for the racing, that’s the best part of all these videos!

[@markhoff5205]

Love the Updates!!! You Can Do It!!!

[@neilreid2298]

Loving the Durango project! Had two of them (street only).

[@badwolf9280]

I cant wait to see yall at road kill nighr

[@keefespencer1173]

It would make over 1600 if you put a Roots blower on it and it might make over 1600 if you put a Screw blower on it depending on the size of the blower and depending on the size of pulleys you run on it or even if you put a bigger Whipple on it with the smallest size pulley on top and a decent size on the crank pulley and if you play around with the pulley sizes on the 3.8 Whipple you should atleast get to 2000hp with it and with the size and weight of the Durango your going to need all the Horsepower you can get and a good thing about the Whipple style blowers you can get them to put out a good amount of Torque as well depending on how you tune it and the pulley set up

[@13699111]

Thank you team Bailey !!!

[@MrJJRACING]

How bout that

[@Rusty.1776]

7 sec, 3 bolt converter!??... I'm sure I saw It wrong!??...

[@trophbrwntrouthunter]

Why not put an SMX in it???

[@Michael666CA]

Roadkill Nights Powered By Dodge NOT Steve

[@Buck__420]

Can't wait . Tom rules

[@AndrewK2020]

What ever happened to the car that Dennis Taylor was gonna build for you?

[@chief3378]

Yes I asked that last video

[@plasticnoband]

I wish it was just a full on pro mod

[@johndoran3274]

I was really hoping for a 4rotor or an in-line 6 for the Durango, but I guess a blown hemi is pretty cool too.

[@erichuff2538]

That's a 3 dcb muffler 😆 🤣

[@Bradley_Clark]

thumbed

[@bigEratt]

2nd coat of wax ?.. Is that a back to the Future reference ?

[@frediefarmer]

👍🏽🇺🇸👍🏽

[@c103110a]

Plenty of time...

[@rickpriami6659]

A lot of work to finish ...

[@andypooley1]

Use a terminal block for the wire gauge problem.

[@jimi.c.e.3200]

Any idea about 2024 SICK WEEK in Florida dates ?

[@PetersonMotorsports]

Get a mic on that man. LOL.

[@SteveMelissaMcAdams]

Can it run through a distribution block maybe

[@edwardthayer9386]

👑

[@ericgregorash6590]

Did they by mistake send you two of the same connector?

[@nnglenn]

I think Tom should stop talking and start working!

[@Michael666CA]

No rush

[@Airsofthelpvancouver1963]

I agree we all want to see the work not so much heat about the work.

[@mdtransmissionspecialties]

Go do it for him? Otherwise stfu.

[@unclesamsgarage]

Bobby isnt allowed to have a family he needs to be married to the shop lol. Such a rare commodity Bobby is

[@imtonedeaf1]

We're Joey when need a feller lol

[@lexteakmialoki5544]

Why has Bobby not killed you yet ? I'm starting to see that look in his eyes !

[@MrJackinthebox46]

Is EJ single ??? asking for a friend!!! lmao 🤣🤣😂😂🙂🙃

[@monroefive-o40]

Get in line…😂

[@OneManBikerDk]

No..

[@LondynMarquita]

I’m asking for a friend too 🤣🤣

[@LondynMarquita]

@@OneManBikerDkyou for real 😢

[@OneManBikerDk]

@@LondynMarquita yeah.. 100% 😊

[@timskiff9422]

PPP.

[@cjm5002]

Any chances of working with Harrop? Im pretty sure im very late to the party on that idea but ya know, keyboard warrior ideas and all, haha!

[@ANotSoHotRodGarage]

Of I lived closer I would come burn the midnight oil and help get the Durango ready.

[@subohioguy]

Why are you using Hoses made in CHINA????

[@timskiff9422]

This shop is chit show, get your poop in group.