WE Luger P08 GBB full Disassemble 完全分解 Part 3 Magazine 彈匣

WE Luger 魯格 P08 GBB airsoft .
Part. 3 Magazine fully disassemble.
彈匣完全分解
To remove the valve first removed the screws and plate, than fill just a little bit of gas in magazine and the valve will be pushed out.
Be Careful !!! the valve may just SHOOT OUT ! if you fill too much gas.
想卸除氣閥，在拆掉螺司跟鐵片後，灌入少量瓦斯氣閥就會被推出來了
小心 !!! 灌入太多瓦斯的氣閥會整個噴出去 !!!
鋼製火控購買連結如下:
For Stainless steel Hammer & Sear purchase :
台灣本地購買:
www.ruten.com.tw/item/show?22...
For International service or purchase please message us or contact "LFJ airsoft"
lfj.com.tw/shop/r-e-c-we-luge...
or
lfj.com.tw/shop/we-p001/

[@kamalarief2703]

Hey man. Thanks alot. I was wondering how to disassemble the valve. Thank you for this informative video

[@R.E.C.-Research-Taiwan]

Any time ~

[@kamalarief2703]

@@R.E.C.-Research-Taiwan do you have any idea how to remake this thing hop up?

[@R.E.C.-Research-Taiwan]

@@kamalarief2703 WE P08 has a hop up ~

[@kamalarief2703]

@@R.E.C.-Research-Taiwan really? I thought the screws were just barrel holder

[@R.E.C.-Research-Taiwan]

@@kamalarief2703 Something is better than nothing, Just check the manual for "HOP UP' adjustment page.

[@user-md4hz8dz7z]

1.30-1.32min ....why there is no video of how and with what the combat valve was removed. write with what puller you got this valve.

[@R.E.C.-Research-Taiwan]

Actually, the magazine valve is just press fit into it and hold by the 2 screw and metal plate To remove the valve first removed the screws and plate, than fill just a little bit of gas in magazine and the valve will be pushed out. Be Careful !!! the valve may just SHOOT OUT ! if you fill too much gas.

[@chenhero8761]

如果彈匣上的橡膠出氣孔會漏氣是什麼原因？

[@R.E.C.-Research-Taiwan]

沒辦法實際檢查你的零件比較難找到真正的原因，要隔空抓藥的話會我會先猜是氣閥裡面的O環有漏氣，換一條新的O環或是新的氣閥應該就能解決，也都買的到，但P08彈匣實在不貴，就看你想修還是想再買隻新彈匣囉~

[@chenhero8761]

@@R.E.C.-Research-Taiwan 跟85號零件沒關係嗎？因為氣是從那裡漏的

[@R.E.C.-Research-Taiwan]

@@chenhero8761 #85號零件並沒有承受瓦斯壓力，作用是在汽閥被敲開時引導瓦斯流向而已

[@chenhero8761]

了解，謝謝

[@chenhero8761]

不好意思，我還有一個問題，請問我的P08空彈匣直接上膛可以正常後定，但實際打完彈匣卻沒辦法後定，這樣子跟彈匣漏氣有關聯嗎？