We Made Wholecrop Silage For The First Time And It Wasn’t Easy!

In this video we do something a little different! We make whole crop wheat for the first time ever! Will we do it again? Was it good? I guess you'll have to watch to find out.
Oh and as you would expect, things don't quite go to plan either...
I hope you enjoy it.
WEBSITE & MERCHANDISE - www.baldysfarm.com
Follow me on
INSTAGRAM - / baldys_farm
COAT AND OVER TROUSERS -
Proudly supported by TorraMór (www.torramor.com/) and Powered Pasture (www.poweredpas...)
TorraMór Mens Smock (Coyote)
MY GEAR -
Camera - GoPro Hero11
Mic - DJI Mic
Drone - DJI Mini 3 Pro
Tripod - Ulanzi

[@jameszy88]

Hi james there will be a magnet and sensor for counting the revs and bed position. check the magnet and sensor position. May have moved or been knocked.

[@baldysfarm]

Checked the sensors and that was all good, but swapped it back onto the 6125 and it worked fine! So must be an oil flow issue on the 6410 🤦🏼‍♂️

[@DJC995]

Hi James Hopefully the wrapper is now working Have a good weekend Thanks again

[@baldysfarm]

Got it going again Darran, turned out to be a tractor issue. Not 100% sure what yet though. 🤦🏼‍♂️

[@EdwardMoore-so6zp]

JD. 6400 proper tractor 🚜 👌

[@baldysfarm]

They don’t make em like they used too!

[@michaeloregan1508]

The joy stick is by far the best way to wrap, your always in control and you can wrap much faster

[@baldysfarm]

I didn’t even know until now you could get a joystick. That would be a dream!!

[@stephenross1581]

Great video again James, I think the amount of silage you do now a Fusion is the way forward for the farm ❤

[@baldysfarm]

Thanks Stephen! Yeh, we have been discussing it our end, they are just some serious dollar 💵 😳

[@johnlewins4523]

I’d say an oil flow problem… check your no pressure return.. or swop spools around see if it meks a difference

[@saragayle2217]

Great video ❤

[@stuartsmith4014]

I have the same wrapper check the positioning sensor under the bed .There is a sensor and a magnet check the magnet hasn't come off and moved.

[@baldysfarm]

Checked the sensors and that was all good, but swapped it back onto the 6125 and it worked fine! So must be an oil flow issue on the 6410 🤦🏼‍♂️

[@PK_Blinder]

Don't forget to put the spares in a safe place... You know, that very safe place where they will never be found... 😏

[@baldysfarm]

Don’t even joke! The amount of times I’ve done that is uncountable! 😂

[@willyfindlay4398]

Good luck withe the Whole crop wheat or shredded wheat for Cooooos. Interesting to know it's analysis eventually 🤔 😊😊😊

[@baldysfarm]

That’s Willy, I’ll be sure to share it when we get everything done. 👍

[@samsfarminglife7763]

Magnets on a slider on the underside of the bed of the wrapper, unscrew and move slightly

[@baldysfarm]

Checked the magnets and they are all fine. However we swapped it back into the 6125 and it worked fine so it must be a tractor issue 🤦🏼‍♂️

[@theyazankelly226]

Hey James! Nice one. How come ya didn’t leave cutting out to dry for a day?

[@baldysfarm]

To be honest, the grass in the crop was super dry and the wheat was on the turn so I didn’t want to loose any more moisture. 👍

[@MrPatrik246]

It's probably a sensor that counts rotations

[@baldysfarm]

Checked the sensors and that was all good, but swapped it back onto the 6125 and it worked fine! So must be an oil flow issue on the 6410 🤦🏼‍♂️

[@MrPatrik246]

@@baldysfarm hmm interesting, compare flow on those tractors

[@jasondavies4887]

I would say something to do with the sensor under the bed of the wrapper

[@baldysfarm]

Checked the sensors and that was all good, but swapped it back onto the 6125 and it worked fine! So must be an oil flow issue on the 6410 🤦🏼‍♂️

[@forcesfarming8511]

Doesn't the conditioner knock out any grain thats there?

[@rogerbarnfield5913]

That's what I was thinking , plus with the grain whole the cattle won't get the benefit of the grains like they would if it had gone tho a forage harvester

[@dermotward6540]

Harvesting ​before before the grains have become fully ripened.

[@goodgod77]

mow it when about milky not cheese

[@jamesmarsh4957]

Yes it will but surly you just slacken it off so it does not pinch the grass /wheat

[@baldysfarm]

Slackened the conditioner off but with it not being super ripe it hasn’t really been an issue. But I get your point.

[@aidandoherty5076]

I'd say a sensor problem

[@baldysfarm]

Checked the sensors and that was all good, but swapped it back onto the 6125 and it worked fine! So must be an oil flow issue on the 6410 🤦🏼‍♂️

[@jakevanballegooy464]

It's a McHale I hate their wrappers

[@baldysfarm]

Yeh, I’m a big Mchale fan but the wrapper have been a bit disappointing tbh.

[@jakevanballegooy464]

@@baldysfarm get a claas uniwrap it will not disappoint

[@jamesmarsh4957]

That bale wrapper want's backing off a cliff your always having problems with it , bet its a sensor , they love a sensor on all kit these days and then they put them in the worst place possible to change , That should make some good feed , see others are asking about the conditioner on the mower surly you just slacken it off

[@baldysfarm]

Tell me about it James. It’s been incredible for years and then for whatever reason, this years it’s been a nightmare! However I reckon this time it could be the tractor. Swapped it back onto the 6125 and it worked perfectly 🤦🏼‍♂️