WE PUT £3000 MODS ON OUR CHEAP PERFORMANCE CARS

[@AutoalexCars]

Get 10% off Car Vertical using code Autoalex! GB: www.carvertical.com/gb/landing/v3?a=AutoAlex&b=38b26e3a&voucher=autoalex US: www.carvertical.com/landing/v3?a=AutoAlex&b=2c9b600c&voucher=autoalex

[@ciubiro]

Welcome to the club, now Rory needs to learn how to drift cuz the damage was already done :))

[@GrahamDallas]

You have found a great balance in this channel, just enough mechanical stuff, just enough arsing about, and lots of personality. The editing is tight and it never gets boring.

[@ghomerhust]

agreed. if top gear had ever gone technical, this is how it would have felt. lots of shenanigans, lots of building, and lots of tire smoke. top shelf

[@Chateauneufdupape27]

Indeed! Keep it going lads!!

[@styles234]

100% agree. Captured some lightning in a bottle here. Keep going!

[@Mrswissy69]

So true

[@StelioKontos-wk9km]

Yes and some of us like and have motorbikes 😍

[@mgcharoudin]

Can't wait to send it around the Ring🔥

[@TerrysCruise]

This needs to happen! Would be the best collab ever!

[@UNDERTHand]

Looking forward to seeing that! TOP NOTCH!!

[@SebVelasco]

Ooooohhh this is on misha

[@mgninetyone7444]

​@@TerrysCruisethey already said Misha is gonna drive their cars on the Ring in a previous video

[@theglowingnugget7999]

Yes that’ll be epic

[@phildoh2]

I changed the video quality to 144p and that paint job Rory did finally looked half decent

[@jimmyalex206]

😂

[@Marco-ip5cw]

i mean it protects the rust atleast

[@jimmyalex206]

@@Marco-ip5cw true

[@midge158158]

That front anti-roll bar might have well been made of kit kat foil

[@retrojb101]

Not gonna lie, your videos have really got me thinking about an R53! That supercharger whine is addictive

[@antrist2369]

I had one for 6 months with a few mods. They're great fun especially for the money - if you're thinking about one, I would definitely recommend it. Just be cautious of all the common problems (it leaks, A LOT)

[@NikoMoraKamu]

hahaha happend to me i was looking for miatas but in spain the second hand ones are stupidly expensive so now i'm looking for an r53 restyled and with lsd that are cheaper and faster

[@jimmyalex206]

yes get one they're awesome , they're fast , handle like go karts , have that addicting supercharger whine and they look so smart and awesome

[@JohnClark-ew8dh]

Get one thats had a replacement clutch - its an engine out job. And one thats had a replacement engine 😂

[@AussieDaz87]

I've had an MX-5 and a JCW R53 -- the R53 is seriously fun! I got rid of it when I started getting a few too many miles on it though, they can be a bit of a maintenance nightmare unfortunately. The R53 was more fun than my MX-5, but the MX-5 cost me nothing to maintain even after years of track days (they don't rust in Australia though!).

[@dwaynne_way]

I have Autism and I absolutely love all all things to do with cars and automotive. Your videos are always amazing and entertaining to watch. Keep up the good work 😊

[@calibrazxr750]

In Germany, if you have parts on your car that are not on the paperwork, or you do not have the official paperwork with you that says those parts can be fitted to your car, then they can impound it, remove the sticker from your rear number plate that signifies that it has a current MOT and you will have to collect it with a trailer. Then you will have to put it right and then re MOT your car. However, they have no jurisdiction to impound a car from another country, as each country has different rules to Germany and no ordinary policeman is going to be aware of what those rules are. However, they could impound it if there is something with the car, mod or fault, that makes the car dangerous to drive on the road.

[@eagle_and_the_dragon]

Danke, German chap 👍

[@heygek2769]

I think the loud exhaust with pops and bangs could definitely be a problem.

[@calibrazxr750]

@heygek2769 I doubt it, as number of high performance cars over here sound like that fresh from the factory. If you have British plates on your car, the police generally leave you alone. Provided you aren't taking the piss of course.

[@calibrazxr750]

@@eagle_and_the_dragon British chap, but living in Germany.

[@eagle_and_the_dragon]

@@calibrazxr750 ah, then cheers to you boyo.

[@Pouckie90]

Rory's camerawork is getting better and better, there were some really nice shots in this one !

[@michaelcook2143]

This channel just gets better and better. Thanks Alex, Taylor and Rory for the hours of entertainment you provide. Proper decent videos. You can tell you all genuinely love doing what you do. Looking forward to the nurburgring video!

[@toerag572]

How on Earth does Alex get through these videos without being punched repeatedly?

[@scottmatthew9605]

I mean, we don't know that he isn't

[@Kylirr]

Editing.

[@BauregardSenior87]

I don't get the hate against the after fire tune, it's obnoxious people who do it all the time as loud as they can.

[@Visionism]

I like that Rory asks really good sensible questions

[@anonymousindividual.]

Modifying your car in Germany is ridiculously strictly regulated. At least if you're German. If the exhaust is slightly to loud for example, they shall rain eternal doom upon you. And if police doesn't do it, the TÜV (german MOT equivalent) is gonna rip your wallet and your life apart. Also police here love to go to car meets and randomly pick out people and have their car towed and taken apart to check if they can find something illegal, just to piss them off. And then help themselves to a lot of your money. EVEN if there is nothing wrong with it. Seen this happen too many times. Mostlikely a lot of german rozzers are very jealous. Also the regulations are getting stricter every year. So they basically hate anyone whose car isn't obviously stock.

[@pigeonpoo1823]

They hate everyone....... full stop. Especially anyone who dares to try and have fun. Fun is a right wing extremist concept and must be banished asap

[@cee5212]

The Germans have always loved getting peoples paperwork in order...

[@trainman86trainstramsandmore]

Glad to see Maisie in good health

[@burnzy3210]

Was there a concern?

[@trainman86trainstramsandmore]

@@burnzy3210 no

[@trainman86trainstramsandmore]

@@burnzy3210 Just haven't seen her on a vid for a while

[@Patriiiiick]

I've got a soft spot for the MK3, mainly 'cos i'm fairly certain it's the only MX5 i'd be able to fit in.

[@Patriiiiick]

Also, if Alex wants to swindle me an exhaust for an E92 325i, i'd be most grateful.

[@voodoossj]

I own a NB, and I fit perfectly! I am 1,96 slim, so you don't know until you test one!

[@Patriiiiick]

@@voodoossj Ahh, maybe i'll have to reconsider one of the early ones as a future car to own! I'm 6ft2-ish and read a lot about people trimming the foam from the seats so their heads didn't hit the roof with the top down.

[@snoozie7468]

​@@voodoossj How? im 1,86 and when i was trying to buy an NB a few years ago, i tested a stock NB1 with hard top. All i could see from my POV inside was the roof, the hood/bonnet, and in the middle, a bit of the road. I had to lean forward a bit to properly see the road, which was quite uncomfortable. I ended up buying a Civic EG5 because of that.

[@voodoossj]

@@snoozie7468 It's the build I think! I have long legs and shorter torso! That's why test driving is mandatory!

[@mikebishop2247]

This channel has easily become one of my favourites. The dynamic with Alex, Rory, and Taylor is only rivalled by Clarkson, Hammond, and may.

[@tameracingdriver]

I got a Cobra backbox and a BBR manifold on my MK3 MX5, can confirm, sounds epic. No crappy pops and bangs map though 🙈I've owned all three of these cars and have been enjoying these vids a lot 😎

[@ChrisLoew]

23:42 shut him down with RACECAR

[@davidstorm4015]

You can change the front ARB on a Mk3.5 Mx-5 without cutting it! I know, I've done it on my driveway, no lift. Also, that Mx-5 now needs a tune due to the new exhaust, otherwise there won't be any power gains

[@Bains12300]

Definitely needs a remap, the stock headers are crazy restrictive, some extra power to be unlocked there

[@DJ-WAX]

makes the hair on the back of my neck stand up watching the car body work on this channel as someone who is a qualified car body repairer 😂 gotta love it tho

[@swissJB]

Taylors Herbert impression was spot on. Totally unexpected almost died laughing 3:23

[@naikjoy]

Lol poor Rory and happy birthday. However the trio should do their best to increase the value of the vehicles they get not damage it or treat it poorly. At least that's what I like to see.., a bit of love and care for these great vehicles.

[@davidh2022]

Taylor with the yellow workmans hat on...like a real life LEGO man!

[@kvirk7583]

We love Taylor seriously bro u got the perfect character for your channel

[@kings3803]

Sorry but taylor in that hard hat all I can hear in my head is YMCA 😂 everyone loves taylor.

[@bboyairrick]

okay, i honesty thought alex's mx5's plates meant something like libido sydney. lmao

[@matthewphillips6766]

This is the absolute best car show on YT. Every time I want to get rid of my car, you post another great episode and I get all excited and decide my old R55 is a keeper. Thanks.

[@paultaylor9652]

Schumacher was and always will be the best F1 driver. Quite ironic the BMW Mini blew up not in France, not in Belgium but in Germany of all countries.

[@babaadonf]

The 651 sport 100tw are really good! On the rain too. The ns2r are really bad...

[@snbala]

One of the best channels about, down to earth affordable cars with the trio’s entertainment. Next episode seeing that blue smoke on the Mini, was thinking that’s a usual mini thing to do lol. Great video.

[@marisasob]

You guys are just an amazing bunch, keep up the fun work! Big Taylor fan btw, he seems to know what he's doing and hilarious lad 🤣

[@elicansmile]

If you loosen the alternator and pull it against the tensioner you have enough room to pull the header without lifting the engine.

[@cornovii3012]

It's not an oil leak, its a constant oil change, always got clean oil :)

[@Aurora1337onYT]

Tell that to his Driveway 😢

[@AranOCNC]

Love seeing more people using the nc as a base. Love car with a few mandatory mods. Props on the bcs!! Would love a set of those

[@fredd3.14]

rory, that hazing after polishing might be because you didnt clean off the polishing compound properly after ur done. if you leave it sitting with any compound on it hazes up

[@kjah06]

Rory's exhaust was nice n sophisticated. Alex's was just full on ADHD spec lmao

[@slinkey123]

Power flow are awesome man. I needed a exhaust years ago for my Clio 172. I got one custom made and fitted for 190 quid at a reseller. couldn’t believe it lol. Average price back then for the typical, cobra, miltek, scorpion was still around 400 and would still need fitting.

[@Jahmed5635]

Got to rate Taylor on his wealth of knowledge on mechanical side of things, this man literally knows everything about cars and rust buckets 🪣 big up Taylor 🙌

[@briandstephmoore4910]

Taylor is spot on! All noise and looks with zero power adders that's textbook RiceGod

[@Ironraven001]

I just love this channel. Wrenching, racing, f-ing stuff up, fixing your screw-ups... just an all around good time.

[@eilertv]

Next time you are doing small paint like that, spray in an old ice cream tub or something. Then use a pinstripe brush and paint the chips with paint from the tub. You do it right, you end up with a layer off paint a bit thicker then the original, with no drip. Sagging you will remove with sandpaper, or prevent by adding paint over time. After dry, use some high grit sandpaper and wet wipe it down to level with the old paint. Apply clear coat. What I do on my cars. As long as you get colour coded paint, you will have to study it to see it. Takes time, but worth it if you want it to look good.

[@BoBnotThat1]

Piper wow they still going I remember them from back in the day

[@gwengo4167]

Really love that mx5, I actually want one now. Great series guys, looking forward to seeing the cars in action 👌🏻❤️

[@michaelwoffindin]

I'd love to be a presenter on this show because it hardly looks like work haha. 😂 I'm sure it's a lot of work behind the scenes though. But it looks like you're just working on cars with your mates and having a laugh, which sounds like so much fun you'd hardly call it work.

[@smiles564]

NC Miata engine doesn't need to be lifted to pull the header. I've done it on two of mine, no issues, just a tight tight fit.

[@just_justin_11]

Honestly I think I'd still take the mini out of the 3. Those supercharged cooper s have a place in my heart especially in that color

[@Jabber-ig3iw]

I had a bespoke X pipe exhaust made for my V8 Audi S5, removed all the resonators and silencers, went from a grumbling V8 to a howling V8. Tunnels were epic in it.

[@boydsterling3193]

Oh my word Alex’s impression of Taylor cracked me up

[@SRJ_33]

Have you guys removed the 2 little bits of foam in the airbox? If you haven't, do it. I had a "57" 3.0 Z4 Roadster, induction noise will increase by at least 50%! A little freebie to get more NOISE!

[@ASCIIDOS]

I've had a mk2 MX-5, it died a horrible rusty death. Always loved the MK3's when modified, love the video Alex 😁

[@lestermikechuamd]

22:10 dentless paint removal… LMAO😂

[@Scitch87]

I finally realized why i'm always getting hungry watching videos from Alex. It's because the logo in the beginning reminds me of the early 00s Pizza Hut with the colors and font. Great now i'll have to go get some Pizza.

[@josephhughes7186]

Taylor saying mine was the best the last trip then proceeding to require a new engine after doing 140mph for about 5 minutes before getting to the track 😅😂

[@memertoire]

13:27 whyd the rear wheel spin that freely when he revved the engine? Is that normal? Or was it not in gear?

[@davidburchell7597]

First time watching this channel and some very funny content!

[@Easyazcarcleaning]

HAPPY BIRTHDAY RORY !! 🎉🥳🎂🎁🏆

[@oliabid-price4517]

Rory, I feel your pain. Having to work alongside such a tool must be hard work.

[@FierceMotorworks]

Alex giving some major “Bob the Builder” energy during that sponsored segment

[@HighRiderSonoma]

You guys are awesome!! I laughed so much. I love your camaraderie. Keep up the great work guys. All the best.

[@chrismarnoch8540]

Really really hope you fix the oil leak before going on the ring!

[@Zantrop64]

In france you technically can do no mods (that means be smart about it), and they don't take your car but they give you a date for an inspection for it to be fully stock, and you can't drive it in the meanwhile

[@alastairholland4433]

The Mini will always be a beast

[@somewhat-similar]

Please make Taylor wear that yellow hat for every single video from now on. Thank you.

[@wozmac771]

If the MX5 is from the Ford era, change the engine to the newer Skyactive. Thats the most important upgrade. If consumers and insurance companies do not report the issues, how can car vertical figure the accuracy. Have used carfax and got false and completely inaccurate info.

[@althejazzman]

Rory's birthday present reaction was equal parts joy and shame.

[@edwardgrafton4663]

Alex is a great friend too Taylor and Rory and it's good too have Taylor as his own personal mechanic too fix their cars.

[@CarRevview]

13:32 when you drop your Baguette in front of a french person.

[@FPMGarage]

❤❤❤ love it!! The guy who made that piper exhaust I bet he's such a cool mx5 guy 😂

[@ianhill20101]

Piper exhausts never fail to impress.

[@pauliewalnuts240]

I appreciate the proper application and usage of your safety helmets In this video

[@jufinda]

definitley not me, 31, Laughing at Taylor saying "Fani Mold"

[@da-mazing8500]

There is no way Taylor will not "borrow" a set of tyres for the ring

[@StrangelyIronic]

1500 pound with 3-5k in parts worth maybe 2k for sale, maybe 3k if you get someone too innocent to barter. My rule is for every custom part added that doesn't have a credible builder's invoice included for the work (that I can call and ask about if crucial) then that's possibly a reduction in what I'm willing to pay or at the most stock price. These I'd be fine with (easy to inspect/check, genuine parts, people I could question and give answers, etc.), but when I see pictures of an engine on a stand at one point, I start to tell them good luck finding a buyer that'll pay what they want. If it's an RX-8 I might take a second look, I flipped those in high school back in 09/10 doing engine rebuilds/swaps over the weekend start to finish and know my way around the stupidly simple renesis engine and solid chassis that is a rx-8. I have one original engine at 240k miles now, no problems with basic upkeep. I treat it like a 2 stroke with premix after yanking the electronic metering pump out, that didn't feed enough oil to begin with (to keep within standards), and it runs fine albeit a little rough on fuel economy as they all are.

[@origamimaster713]

Got a supercharged mx5 mk3 and with suspension upgrades its a completely different animal

[@kenknowles51]

Taylor’s Herbert impression is spot on 😂

[@isend2c]

I really liked all the swearing, made it feel like I was working with you screwing things up myself

[@reptilez13]

I love the MX5. Add another couple grand, maybe do a junkyard K swap or just a turbo kit, and you can really get moving. Here in the midwest US you could be all in for like $8k lol. I wanna get one asap when I have room.

[@AlvinBrinson]

Or even just a 2.5 swap apparently that's super easy

[@motorcyclerescuer]

The z4 new exhaust sounds rubbish. I would be well upset if I bought that system and it sounded like that.

[@Dkmode1]

You skipped over the part where those Accelera 651s are the biggest pain in the arse to fit to the rim. The side walls are harder than girders. That being said the set on my car grip very well for amateur track use.

[@christovanjaarsveld2821]

The pops and bangs from the mx5 sound like the start of Crazy Frog from back in the day 😅🤣

[@Ze-Germanzuk]

Do these sort of exhausts pass an MOT? I know for bike tests the exhaust noise isn't really checked it's just an advisory but is it the same for cars?

[@FatDane_]

“Nobody knows you..” that was cold! Why you gotta do Taylor like that?!

[@alfamale5065]

I'm sorry but that impression of Taylor at the end sent me over the edge 😂😂😂

[@carcontrolcommitment]

and the irony of what happened to the MINI is an absolute kicker for Taylor

[@dallascowboy23]

Yes. More mod vidz! And more time-lapse of the work ❤️

[@ssmidnight9340]

I had r32 gtr forged 16" wheels on my nc3 looked amazing , alot of chaps in Japan run these , should of try to get a no pro body kit from japan they look amazing

[@cogboy302]

Is there a reason Taylor looks like Bob the Builder?

[@genericcarchannel]

I can confirm those 651sports are great in the wet

[@spongbob18]

legend when he cut anti roll bar i was like dude youre missing the point whe ended up dropping the sub frame 🤣

[@Wolff36]

The Z4 has a lot of character now. Just get a quick polish indeed.

[@Nackron]

Looking forward to seeing that! Stay safe on the autobahn

[@DIZZYDAZZLER2011]

PBS pads are superb...had them in my 172 cup and Cooper S !!

[@twd892]

Sorry Alex but I have to let you know I've been watching your vids for that long, it now kinda feels like watching old family vids featuring a lovable dodgy uncle😂

[@sixonemedia]

at @5:18 i honestly thought @autoalexcars said "shall we have a look in your basement"... made the scene so much funnier haha

[@endless_touge]

:)))) You are gonna die with those BluePrint brakes on the track. Never had such junks in my life. In about 10 min of Touge i ran out of brakes completely. My father's Blue print clutch desintegrated in 6k km. My BluePrint wiper blades were cracked in few months. Avoid that company no matter what !!!

[@dutton2666]

I honestly think you should of added Taylor wages for fixing all the cars into his budget seeing how Rory’s budget was blown

[@anezmanzoor4221]

The way Alex looks at the bodywork

[@witchcraftauto]

Your videos only make me realize I don't have any friends to muck about with on cars!! Love the content blokes, keep it up.

[@timmo3351]

Nice Blade! Bring it to the channel!

[@carguy815]

you're supposed to roll the tape back on itself to create a feathered edge rather than hard lines which you get from spraying against a straight edge just a friendly tip for future