We Raced a RTR RC Car! - Nitro MP9 ReadySet to 1/8 Race Buggy - Part 4

  Рет қаралды 370,045

AMain Hobbies

AMain Hobbies

Күн бұрын

Part 4 collects all our hard work into a single evening at the track - how'd we do?
Every R/C Racer needs a transponder: www.amainhobbi...
This is the newer version of the MP9 ReadySet Buggy we raced: www.amainhobbi...
Recommend products for the RTR, from Pro Racer CJ Jelin :
Kyosho Hard Front Shock Tower: www.amainhobbi...
Kyosho Rubber Shock Boots: www.amainhobbi...
Kyosho Aluminum 17.5° Caster Blocks: www.amainhobbi...
ProTek Aluminum Servo Horn (25T): www.amainhobbi...
Products CJ Jelin was using:
MP9e EVO Race Buggy: www.amainhobbi...
Hobbywing XR8 SCT ESC & 1900kV Motor Combo: www.amainhobbi...
ProTek 170SBL Steering Servo: www.amainhobbi...
ProTek 4S 100C 5600mAh LiPo Battery: www.amainhobbi...
Check out the Silver Dollar R/C Raceway:
tracks.amainho...
For all of your RC needs visit AMain Hobbies: bit.ly/XcAuJr
Follow us on Instagram: / amainhobbies
Like AMain Hobbies on Facebook: / amainhobbies
Follow @AMainHobbies on Twitter: / amain_com
MUSIC BY: @DCUTTERMUSIC / HTTP://WWW.DAVIDCUTTER...

Пікірлер: 352
@mgaliciao
@mgaliciao 11 ай бұрын
crazy to think that this video series got me into nitro racing...its nice coming back to it and see how much I've done ever since. You guys should make more of these, or an updated version of it.
@wyvern4588
@wyvern4588 3 ай бұрын
Driver>Tires>Setup>Servos>Chassis>Engine
@ajacks8007
@ajacks8007 10 ай бұрын
I still love watching this series, super entertaining
@adamirish25
@adamirish25 4 жыл бұрын
What an amazing facility. I wish we had somewhere like this in the UK. Enjoyed that, thanks.
@nathandavies2677
@nathandavies2677 4 жыл бұрын
I totally agree!
@thenameisrwac5239
@thenameisrwac5239 3 жыл бұрын
Cries in Singapore...
@flubber781
@flubber781 3 жыл бұрын
we do, its called Herts Nitro Model Club
@freddieparrydrums
@freddieparrydrums 3 жыл бұрын
Paddlesworth :)
@freddieparrydrums
@freddieparrydrums 3 жыл бұрын
I went to a carpet racing club in Kent and they hated me because I was a beginner. Almost made me quit RC. I’m 14
@dangrows_za4798
@dangrows_za4798 5 жыл бұрын
Great content Brett! Well done AMain for putting some focus on nitro. I'm loving this series, keep up the great content!!!
@dangrows_za4798
@dangrows_za4798 5 жыл бұрын
wanna be sure to consistently get that 7 min fuel stop??/ get the back plate for that engine hehehe
@markscotchford4159
@markscotchford4159 4 жыл бұрын
I think you did brilliantly holding your own and being very modest. Kudos as you would say to you and to CJ for being so modest too. Very impressive and underneath you must be very happy indeed.
@MikeyGG34
@MikeyGG34 4 жыл бұрын
We used to race at my buddies racetrack about 20 years ago! Lol Some of the tricks we learned the hard way: we used finger nail polish for the screws that went into plastic parts and for lock tight screws and nuts. It keeps them from backing out from vibration. Then we siliconed our carbs,carb to engine,nipples and all,and theard taped the air fuel mix screws,no more leaning out from air leaks.We hosed clamped our exhaust silicone together.no more exhaust pipe coming apart. And the best one ,was the balloons that people use to make little animals out of,we used for shock boots. They worked great for keeping the shock shafts from getting all scratched,and bad sticky shocks. Hope someone can use some of these ideas,and have longer problem free runs like we did.
@AMain_Hobbies
@AMain_Hobbies 4 жыл бұрын
Great tips Mike. -Brett
@masonall5657
@masonall5657 2 жыл бұрын
PLEASE MAKE ANOTHER RACE SERIES LIKE THIS, this is actually the best series you have ever made and you should make another.
@arronbaddams6247
@arronbaddams6247 5 жыл бұрын
This is honestly my favourite rc series on KZbin at the moment!! Look forward to more
@rogerserafin
@rogerserafin 3 жыл бұрын
Thanks Brent for the videos. It't good to hear and see Kev " The Rev " Jelich doing well; track master builder.
@brookmiller2427
@brookmiller2427 5 жыл бұрын
I wanted to like this video two times👍 I’ve ran nitro for only a year and it is amazing but a lot to learn, the be happy with what your doing advice is perfect for the nitro racer. Last race, B main, flamed on the first turn. Raced up to second for the bump, battled for 14 minutes of a 15 minute main for the bump flamed again one lap to go, finished 4 seconds off the bump, best, funnest race ever. Missed the main 🤦🏼‍♂️
@AMain_Hobbies
@AMain_Hobbies 5 жыл бұрын
Sounds like you were really close to bumping up. It's tough to work your way up and put in that work, then have the engine die on you. Nitro really tests your patience sometimes. -Brett
@robertruiz9466
@robertruiz9466 Жыл бұрын
Brett you truly Rock I admire your passion and enthusiasm for the hobby. My grand kids love your unboxing and other great videos
@robertruiz9466
@robertruiz9466 Жыл бұрын
Excellent video as always A. mAIN. at 15 years old I thought this was the best sound ever of hearing A nitro now at 50. years old it's the most annoying sound ever however all you young racers keep competing and doing great things for the Hobby it's very rewarding and a positive environment to be in find your calling in the hobby it offers so many dynamics
@TheNutzandBoltz
@TheNutzandBoltz 5 жыл бұрын
That was straight up fun. i could feel my breath slowing and my chest tightening then you gave the Jedi newbee speech. I needed that 36 years ago when I was racing my Frog.
@barrytoddwilkerson7282
@barrytoddwilkerson7282 11 ай бұрын
And the Tamiya Hornet, lol
@YQVN35
@YQVN35 3 жыл бұрын
very cool race track and all that comes with it..very nice video and bravo to the young experienced racer.
@tlfbshti364
@tlfbshti364 5 жыл бұрын
MASSIVE missed opportunity for Brett to voice over some nitro sounds for the start of his race XD awesome video guys, this series was great! Brett is one lucky dude!!
@alexr9030
@alexr9030 5 жыл бұрын
Quite Impressive , you didn't loose your touch . Nice to see the good results for this car overall. I also like the ending , and a lot of people would agree this guy is having so much fun . Keep up the good work Brett .
@AMain_Hobbies
@AMain_Hobbies 5 жыл бұрын
Thanks Alex. -Brett
@calvinbass1839
@calvinbass1839 Жыл бұрын
Looks fun. Thank you for sharing. Have a blessed day.
@EriMCardenasRC
@EriMCardenasRC 11 ай бұрын
That kid knows alot 👌
@charlesbonkley
@charlesbonkley 4 жыл бұрын
I'd say you were a pretty damn good driver. Folks were jealous AF.
@mudpuddle8805
@mudpuddle8805 5 жыл бұрын
That was awesome! Super high quality production with input from a pro! I was very impressed.
@45035
@45035 5 жыл бұрын
Outstanding shipmate.
@scottcupp8129
@scottcupp8129 2 жыл бұрын
I've been doing a lot of awesome ordering from AMain lately. Love them so much. There is nothing better in the world of RC. THANK YOU :)
@AMain_Hobbies
@AMain_Hobbies 2 жыл бұрын
Thank you Scott! We've tried to create a shop that stocks all the niche things r/c guys and gals would want and need. Thank you for shopping with us. If you ever have questions, let me know! -Brett
@BlvlWmpower
@BlvlWmpower 4 жыл бұрын
Absolutely amazing raceway. Great job on your video career dude.
@jimbolaya65
@jimbolaya65 2 жыл бұрын
Really nice presentation! I’m recently new to RC (way over here in Pennsylvania)and have been looking at and learning tons from many different sources. Amain is quickly becoming one of my favorite places . Thanks for the great videos 😎😎
@AMain_Hobbies
@AMain_Hobbies 2 жыл бұрын
Awesome, welcome aboard! Let me know if you need anything. -Brett
@cup_and_cone
@cup_and_cone 5 жыл бұрын
"I don't think we can make 7 minutes"... Heavy blue smoke pouring out every straight, lol.
@AMain_Hobbies
@AMain_Hobbies 5 жыл бұрын
Haha. But anyone who buys this RTR, or anything similar, should not lean the engine to the max. You need some smoke coming out of the pipe. For the new nitro racer, it's usually a "set it and forget." And to be fair, we tuned the engine in 100°F weather, and on race day it was considerably cooler, and we had no pit guy or time to mess with the engine. We're not pro racers or pro tuners, and Gord Tessmann missed his flight. -Brett
@Wicuscriz
@Wicuscriz 5 жыл бұрын
@@AMain_Hobbies "and Gord Tessmann missed his flight" LOL
@sebtarta
@sebtarta 5 жыл бұрын
Rather have a nice plume of smoke than non what so ever. Yes you could hear the engine running slightly rich, but it kept with the big name engines.
@New2Kendo
@New2Kendo 5 жыл бұрын
@@sebtarta depends on allot of factors, I dont tune using a temp gun or by smoke, only on sound and performance
@TestECull
@TestECull 5 жыл бұрын
@@New2Kendo I tune by performance and smoke. If it isn't smoking it's too lean, if it isn't performing it's too rich. The happy medium is where the performance is great but it still smokes under load.
@tommytsunami5773
@tommytsunami5773 4 жыл бұрын
"initiate smooth voice" lol that's great.
@pjburcham5938
@pjburcham5938 3 жыл бұрын
My mp9 holds its own..... You just proved that ya dont need a 1100 dollar rc car to go be competitive! Love mine and wouldnt trade it for nothing. Good job man. Ya got a mean machine!! 👍👌
@quintinlindsey7967
@quintinlindsey7967 3 жыл бұрын
That's was cool man you could see it in your eyes... you know you have a pimpin job... and for real dude congrats for being able to live your dream!!!
@matthutch5919
@matthutch5919 4 жыл бұрын
Your running 2nd (until the roll) & a bloke says "we'll get a fast car" 🤣🤣🤣 Maybe it's the driver, u kicked it sweet 👍👍
@bjornwiking1054
@bjornwiking1054 5 жыл бұрын
Great series, really nice watching! Since you kind of won the race, the differences between RTR and better cars seems to be quite slim. Especially accounting for trac conditions ... Once again, thanks for some real quality content!
@brettcoyle2399
@brettcoyle2399 4 жыл бұрын
Yeah when it comes to kyosho brands cause there RTR versions are badass
@naomijackson1859
@naomijackson1859 4 жыл бұрын
if the other car had not landed on top of you, who knows,may have won the race.
@Powerpickle68
@Powerpickle68 5 жыл бұрын
Proves that this ready set is worth buying
@Shellbackrc
@Shellbackrc 5 жыл бұрын
This series has me sold on the MP9 TKI4 RTR to get me started with nitro RC's thanks for the videos!
@mrsideways4574
@mrsideways4574 5 жыл бұрын
Marques Butler get a losi 8 trust me it’s cheap the quality is good just the only thing to worry about is the inch hardware
@mrsideways4574
@mrsideways4574 5 жыл бұрын
Marques Butler get a losi 8 trust me it’s cheap the quality is good just the only thing to worry about is the inch hardware
@Shellbackrc
@Shellbackrc 5 жыл бұрын
I have considered the Losi 8t $399 is very tough to ignore
@mrsideways4574
@mrsideways4574 5 жыл бұрын
Marques Butler don’t rush if you plan on racing i would say just go buy a used kit
@gigi9467
@gigi9467 5 жыл бұрын
Ahhh nitro the smell the power the noise, the pain in the ass to get it tuned and set up properly!
@AMain_Hobbies
@AMain_Hobbies 5 жыл бұрын
HA! it can definitely be a love hate relationship. -Brett
@matthewneufer1758
@matthewneufer1758 5 жыл бұрын
That’s a good kid there , dude your a pretty good driver .
@Sfn1107
@Sfn1107 5 жыл бұрын
Yess...GOOD TO SEE NITRO VIDEOS...TIPS,TRICKS LOVE IT KEEP THE NITRO GOING...PLEASE....
@kruzracing1692
@kruzracing1692 5 жыл бұрын
Wicked cool video series. I really enjoy the sound of nitro and just overall the technology. I am personally an eRacer! This is an great thing to do.....take them RTRs and ready to race them. I just know when I was new to the Racing of RCs, it's the price tag and what actually is needed for the track. I really enjoy building RTRs for the track. I am currently bringing an ECX Revenge back and turning an RTR laps on the track this year. I provide the build online ecxforum for fellow ECX lovers. Again, I totally enjoyed this vid series, and keep pushing these RTRs, this is what will expand the hobby.
@gregmcintosh3227
@gregmcintosh3227 5 жыл бұрын
Loved this build from start to finish would love to see more of this content 👍🏻
@charlesbonkley
@charlesbonkley 4 жыл бұрын
Indeed a great track, for sure. He said aluminum SERVO, not aluminum servo horn, but you did the right thing in vid #4 and commented in vid #5.
@Ultegra10SPD
@Ultegra10SPD 2 жыл бұрын
The 8ight 2.0 RTR was still 1 of the best RCs i've had in my ~100. Fact that u didnt have to do much of anything to be competitive with it was awesome. Direct qualifier into Amain of a big regional warmup race (Had an Emain) out of the box just about (maybe some LH thread shock bolts and a stronger replacement steering servo) even on stock step pin tires was 1 of my best days. Also finished a 30min club Amain on 3 shocks when left front shaft broke 2min in. Finished on the box no less kids cheering constantly 'go broken car!' It can be done folks. Shame RC is in a horrid state. Just read that another track and shop closed this wkend. Didnt even know our state had more than 1 left. -U10
@ryantemming7739
@ryantemming7739 4 жыл бұрын
nice job brett
@_S_K_Y_SaMuRa1_
@_S_K_Y_SaMuRa1_ 5 жыл бұрын
Great series mate, you held your own and did fantastic. Hats off to you bro
@AMain_Hobbies
@AMain_Hobbies 5 жыл бұрын
Appreciate it. -Brett
@manaz28jose
@manaz28jose 5 жыл бұрын
Awesome Video Series. Thanks Bret and Amain. 👍😎
@scottcupp8129
@scottcupp8129 2 жыл бұрын
That's a great kid there! He knows his stuff for sure!
@AMain_Hobbies
@AMain_Hobbies 2 жыл бұрын
Yeah he is! He's still going strong today. -Brett
@paulallen-01
@paulallen-01 4 жыл бұрын
That was very impressive for an rtr!! It was running a little rich, definitely could have leaned out the low needle a bit more and definitely the high speed
@evhexrc1765
@evhexrc1765 5 жыл бұрын
Wow, my suggestions for each video have been the next! One of them was upgrading the engine. Great job at the track Brett! If you switch ALL of the Phillips head screws and mating hardware to lightweight titanium and aluminum fine threaded hex head screws/hardware, that’ll drop the weight a bit and reduce the likelihood of screws backing out. If a particular screw keeps baking out after that, even with blue locktite, you can mix the blue with red. I suggest a 75:25 blue to red mix.
@jt5261
@jt5261 11 ай бұрын
Love it, great video. 😃👍😃 Makes me want to get into 1/8 buggy racing. It looks like the key to a good race is consistency and driving smooth. It’s shame you got a bump roll. Shame there aren’t as many tracks in the uk. The model scene seems smaller over here
@rcaction8030
@rcaction8030 4 жыл бұрын
Great Review! thanks again. Definitely on the cards for my first nitro rc car
@BryanDuggan2010
@BryanDuggan2010 Жыл бұрын
I love this kid!
@phezmann4732
@phezmann4732 5 жыл бұрын
Good job guys. Brett, nice work. Yeah CJ was killin it..
@melencioalmendarez3677
@melencioalmendarez3677 4 жыл бұрын
It's awesome to you dude and amain nice now I want kyosho for sure
@michaelalessi666
@michaelalessi666 4 жыл бұрын
Like Formula 1 have Monza, this is "The temple of speed" for R/C buggies! Totally mind blowing ❤️❤️ Love from Italy ❤️
@BIGLARZY
@BIGLARZY 3 жыл бұрын
Really enjoyed watching this
@dantop1280
@dantop1280 5 жыл бұрын
Awesome job! And awesome tracks! Great driving !! The last Kyosho I built was the USA-1 20 years or so ago...... lol
@AMain_Hobbies
@AMain_Hobbies 5 жыл бұрын
NICE! Always wanted one of those. -Brett
@flamed6971
@flamed6971 5 жыл бұрын
Finally they raced my favorite buggy I'd been finding some kyosho mp9 race battle
@zeno6111753
@zeno6111753 4 жыл бұрын
Again, I really loved this series of videos. And I would really, really like to see some kind of RTR class out there. Also, not putting no shame on you Brett, you did awsome, I would like to see some of Kyoshos drivers showing up with one of these cars (setup to their liking of course) to some of the minor events.
@VestedUTuber
@VestedUTuber 4 жыл бұрын
Some tracks (ones with enough buggies) split their 1/8th scale nitro buggy class into two - sportsman and open. Sportsman generally puts a price limit on your engine. ...unfortunately, though, that results in the class being dominated by SH Engines (previously Dynamite Platinum) equipped cars since those things are probably the biggest bang for your buck you can get in a .21, and you still end up with RTRs going up against top-end racing kits and rollers. My 8ight 2.0 is sportsman legal, but it can hang with the top end E-buggies. Of course, driving skill matters a lot as well.
@otm646
@otm646 5 жыл бұрын
You want an plastic steering servo horn. That's the fusible link, otherwise you risk damaging the servo. Horns are cheap to to replace and faster than swapping a servo. In normal use (not crashing) the plastic horn will never fail unless previously damaged.
@Stickies72
@Stickies72 5 жыл бұрын
That was some very nice driving on your part, that car is looking pretty good.
@BASE5NYC
@BASE5NYC 5 жыл бұрын
Great video...that thing is quick on that straight. Nice car. 🤙🏼
@filude305
@filude305 5 жыл бұрын
I have a old neo inferno up grade all around servos , engine, big bore aluminum shock , pipe elimination of eclip all around and more , and rides very competitive tracks out in Florida. Its not what kit you got but how deep involved you get into become the best out on your local track
@VestedUTuber
@VestedUTuber 4 жыл бұрын
I just thought about something - nitro's actually become cheaper for club racing than electric power. Top-end brushless setups actually cost more than decent nitro setups at this point and there's really no difference in the cost of the chassis at this point (in some cases the entry level is cheaper for nitro), and the difference in performance between a low-end and high-end setup due to timing boost and other features on expensive high-end ESCs is a much larger factor than the difference between a low-end and high-end nitro engine. Seems like a good time to revive 1/10th scale nitro truck.
@riverotterluresericdenson9216
@riverotterluresericdenson9216 2 жыл бұрын
thats what i have noticed trying to get into racing. i think im going to order this. i love nitro anyways.
@vivos71
@vivos71 2 жыл бұрын
I noticed this when my brother wanted to get into racing. Not only is it around $150 cheaper to get a nitro buggy, it's also about the same price as what you need to do to a 17.5 1/10 buggy to run competitively. A Kyosho MP9 readyset is not as much slower than an MP10 kit than a Team Associated RTR buggy is from a RC10B6.3, not to mention 1/8 nitro gives you a lot more track time.
@MrBoomatt
@MrBoomatt 5 жыл бұрын
What a polite kid.
@troyflanagan173
@troyflanagan173 5 жыл бұрын
Amazing video
@acewarren14
@acewarren14 4 жыл бұрын
Planning to buy MP9 Kyosho. Thanks for the video, i enjoyed watching. Keep it up Bro.
@AMain_Hobbies
@AMain_Hobbies 4 жыл бұрын
Awesome, you're going to love it. Have fun and let us know if you have any questions. -Brett
@theRCelement
@theRCelement 5 жыл бұрын
Nice driving Brett👍
@michaeldorich4485
@michaeldorich4485 3 жыл бұрын
Great video.
@marxnex71
@marxnex71 5 жыл бұрын
I gotta say I’m loving this series on nitro. Makes me wanna get back into it. 👍🏻
@sendit2873
@sendit2873 4 жыл бұрын
That is a very smart kit he will go a long way in this hobby/sport good luck
@Firewlkre
@Firewlkre 5 жыл бұрын
Whats left to say? I love this series of video's too!
@europerfo7168
@europerfo7168 2 жыл бұрын
nice video dide make me smile and remind me racing memory with my new pro-x buggy and stress out if im gonna finish
@troyflanagan173
@troyflanagan173 5 жыл бұрын
super fast buggy car!!!
@queenjane7054
@queenjane7054 5 жыл бұрын
PRETTY COOL
@Projectjdmnyc
@Projectjdmnyc 5 жыл бұрын
awesome driving .....
@AMain_Hobbies
@AMain_Hobbies 5 жыл бұрын
Thanks Type R. -Brett
@jarodreddig63
@jarodreddig63 4 жыл бұрын
Great series 👍🏻
@AMain_Hobbies
@AMain_Hobbies 4 жыл бұрын
Thank you Jarod! Happy you enjoyed it. -Brett
@jarodreddig63
@jarodreddig63 4 жыл бұрын
AMain Hobbies Extremely !! 👍🏻😎Thanks Brett!
@timothyrose7581
@timothyrose7581 5 жыл бұрын
Lovin this series on the rtr
@davidlefranc6240
@davidlefranc6240 5 жыл бұрын
its good to see some nitro video man nice job
@DarkWolfWon
@DarkWolfWon 4 жыл бұрын
great driving bro
@RcOffroad9513
@RcOffroad9513 4 жыл бұрын
Great job with that rtr!
@raulvelez6125
@raulvelez6125 5 жыл бұрын
Great video!! Big Amain fan didn't know you guys had a channel! Subscribed!
@jesseortega8598
@jesseortega8598 5 жыл бұрын
Awesome Video Brett. Love the Buggy!
@kenworthNH
@kenworthNH 4 жыл бұрын
Seems like that car can be made pretty darn competitive for not too much investment. It seemed pretty fast out of corners and jumps. With a good tune it seems power isn't an issue.
@AMain_Hobbies
@AMain_Hobbies 4 жыл бұрын
The buggy turned out to be far more impressive than we originally thought. Thanks for watching. -Brett
@longboardguy
@longboardguy 5 жыл бұрын
Love this nitro series and nitro content. I just got a HPI Hellfire ss. An old truggy but it was a steal so had too. Plan on running it around for fun nothing to crazy as I don’t want to break anything. But I got to get a Kyosho Buggy for next year this is a cool series
@AMain_Hobbies
@AMain_Hobbies 5 жыл бұрын
Nice. Is that your first nitro? They're great bashers. -Brett
@MrCameronsterling
@MrCameronsterling 3 жыл бұрын
I miss racing sometimes I ran 1/8 scale nitro buggy I had a hotbodies D8 and did sportsman class, it got expensive going to races in different states but I had fun, this kyosho looks lit 🔥 though good job man
@dfwboxingisback9173
@dfwboxingisback9173 5 жыл бұрын
This is how to represent.
@erwinsonmacmac5970
@erwinsonmacmac5970 10 күн бұрын
It’s really good 👍 🙏❤️
@CaliCoastRCFPV
@CaliCoastRCFPV 5 жыл бұрын
You still got it Brett! Always thought you could have gone pro!
@GrumpyOldManRC
@GrumpyOldManRC 5 жыл бұрын
A legit 4th after running 2nd for quite a bit is not a bad night. Man, I'm impressed. Especially with a slightly modded RTR. You should grin for quite a while my Friend. And you should thank AMain BUT they SHOULD thank you for being such a great front man for them. I mean it. I watch NO OTHER store and only one other brand channel and that is because of who they picked to represent them. Now is the time to say, "AWW, Thanks Mom.👌😁😉
@AMain_Hobbies
@AMain_Hobbies 5 жыл бұрын
I really appreciate that Grumpy! Thanks for your support and for watching. Gives me faith we're headed in the right direction with the videos. You should check out the giveaway video we posted today if you're into crawlers. Good luck. -Brett
@GrumpyOldManRC
@GrumpyOldManRC 5 жыл бұрын
I have a RedCat Gen8 I bought myself for father's day this year and I got the wife (Miss Bly) the RC Everest10 because she thought it looked so cool. I'll go see if I can find the give away vid right now, and thanks.
@AMain_Hobbies
@AMain_Hobbies 5 жыл бұрын
@@GrumpyOldManRC Nice. She's probably kicking your butt on those rocks then. It's great to hear you've got the lady involved though, crawlers are great for that. Maybe you can win her a Trail King: kzbin.info/www/bejne/nn7Hiaevlqh9q7c -Brett
@dirtshart
@dirtshart 5 жыл бұрын
I've been wanting to do a similar build with the Kyosho RB6.6 RTR. Great video series was interesting to watch.
@shermaddictedtorc8540
@shermaddictedtorc8540 5 жыл бұрын
very impressive
@FringeMinority
@FringeMinority 5 жыл бұрын
Great series, good job! Thanks
@philliplyn2692
@philliplyn2692 5 жыл бұрын
Loving this one thanks for sharing very important information giving thanks blessed love to all knowledge is power hopefully everyone pays attention keep up the good work up 🙏🙏🙏🇯🇲🇯🇲🇯🇲💪💪💪
@semaglig
@semaglig 4 жыл бұрын
late to the party, but great content. this has become one of my most favorite channels.
@sebtarta
@sebtarta 5 жыл бұрын
6:18 "Are you racing next?" I was expecting Brett on the next shot "borrowing" all those parts from CJ's car lol
@glowiever
@glowiever 5 жыл бұрын
LOOOOOL SAME
@Futurebeefcake
@Futurebeefcake 4 жыл бұрын
instantly subscribed. yall need to do some fully stock no upgrades rtr nitro truggy videos or racing
@tonyslawncare
@tonyslawncare 3 жыл бұрын
For a rtr seems like a awesome car
@2t_mxrider
@2t_mxrider 5 жыл бұрын
Brett, awesome video! More stuff like this please
@BrewProof
@BrewProof 2 жыл бұрын
"big thanks to Amain hobbies for paying me to do this" ... yeah man thats a sweet job!
@brianwright2008
@brianwright2008 5 жыл бұрын
Great videos! Really enjoyed this series, keep up the good work!
@rezapratama2457
@rezapratama2457 5 жыл бұрын
Ah, really missed this hobby.
@TTMOTO888
@TTMOTO888 5 жыл бұрын
Love your videos brett, I hope you keep making them.
How Fast & How Much? - Nitro MP9 RTR to 1/8 Race Buggy - Part 6
13:36
Top 10 RC RTR Cars of 2024
10:57
AMain Hobbies
Рет қаралды 34 М.
99.9% IMPOSSIBLE
00:24
STORROR
Рет қаралды 31 МЛН
Worlds best RC Race car durability test
13:31
Kevin Talbot
Рет қаралды 640 М.
We Built and Drive the Best Selling 1/8 eBuggy
10:11
AMain Hobbies
Рет қаралды 19 М.
TV Debut for R/C Car Racing! $30,000 CASH
51:37
LiveRC
Рет қаралды 553 М.
Small Tweaks for Success: Nitro MP9 RTR to 1/8 Race Buggy - Part 3
12:04
Converting a Nitro MP9 ReadySet to 1/8 Race Buggy - Part 1
11:18
AMain Hobbies
Рет қаралды 79 М.
Reds Elliott Boots Engine Break in and Race Tune in Kyosho MP9 TKi3/TKi4
12:31
Passionate About RC
Рет қаралды 378 М.
New Servos: Nitro MP9 RTR to 1/8 Race Buggy - Part 5
10:08
AMain Hobbies
Рет қаралды 57 М.
Hitting The Track: Nitro MP9 RTR to 1/8 Race Buggy - Part 2
12:30
AMain Hobbies
Рет қаралды 126 М.
99.9% IMPOSSIBLE
00:24
STORROR
Рет қаралды 31 МЛН