We TRADED We BOUGHT - The Change We Had To Make

[@IFarmWeFarm]

Hi all, will not be able to get back to messages or comments for some time as my dad has taking a turn for the worse this week and our focus rests there for now. Your thoughts and prayers would be appreciated. Thank you 👍

[@liampatton6290]

Get well soon Mr Morris

[@theexiled_0]

Gods speed lad.

[@craigdoig9486]

Sending love to your father

[@cdemo1186]

Thinking of you and all the family Adrian, will be thinking off and saying a prayer or two for your father.

[@lynnew5619]

He’ll be in our thoughts for sure. Get well soon Mr M. ❤

[@andrewjones-productions]

I'm very sorry to read that your father is unwell. I wish Mr. Morris a speedy recovery and am sending best wishes to him and you all. Thinking of you.

[@seamuspower5900]

Adrian I’ll say a prayer tonight for your Dad ..take care

[@TOPtee34]

Thoughts and prayers for you all 🙏🙏

[@philipgraham6980]

Will be thinking and praying for your dad and your family, God bless you all.

[@lindaarmstrongjackman9788]

I hope your Dad is doing a bit better. Sending my prayers for your whole family. ❤❤

[@GraemeMitchell-m6v]

Hi Adrian....all our thoughts and prayers are headed to your dad.

[@user-mjg1067]

Adrian, sorry to hear that, I'm in a similar situation with my mother I'll say a prayer for both, all the best

[@IFarmWeFarm]

I’ll light a candle for your mum, wishing you the best

[@georgemorrison6689]

Thoughts and prayers are with you and all the family Adrian,God bless

[@tonysargent7787]

Hi Adrian Sinead and girls another great video has always 👍

[@EweTubeIreland]

Very sorry to hear Adrian!

[@Murphycats]

Holding your family in my heart.

[@GerryBurke-e2m]

Adrian, I'm so sorry about your dad. My prayers and thoughts for his quick recovery are with you.

[@garymadden2656]

Great video Adrian wishing you father a speedy recovery 🙏

[@richardleigh1762]

Sorry to hear about your Dad Adrian , hope all is well with him . Hedge cutter seems to be a good purchase and no doubt it will be having a coat of paint soon .

[@shamrock4500]

I did not realize the hedges were maintained by the property owners. I'm so sorry to hear about your Dad.

[@kccolby7562]

Adrian, best wishes for your Dad ❤

[@GaryLaurin]

Adrian take care and prayers to your father and family 🇨🇦 🙏🏻

[@irishdancer2753]

Adrian, you have my prayers, for sure! 🙏🏻

[@ourfloridagarden4191]

Sending hugs to your Dad.

[@matthewryan8169]

Unreal editing Adrian. Every prayer for your father’s recovery.

[@ReGenlivestockIreland]

I hope your dad is OK thought's are with you and your family.

[@EarlePriest]

Brilliant video keep them coming they are so explanatory and you can almost be there using it.

[@bobtaylor6508]

Prayers are with you ,your father and your family

[@Dermot501]

Great video 📹 🚜 All the best with the new machine 👍

[@norahcunney2621]

Prayers for your Dad

[@briandowdall6495]

Thoughts for your dad and your family Adrian. God bless.

[@SeanieD1968]

Hope your dad feels better ❤

[@nancysmith-baker1813]

I am so sorry about your Dad. Don't worry about you tube . Take care .

[@randybutler4772]

Another good video Adrian. Thank you for sharing.🐄

[@MarkSmith-vi3gt]

Hope your dad gets well soon

[@franreynolds8506]

In our thoughts and prayers 🙏

[@sandymcghee3328]

Great video sorry to hear about your dad hope he gets better soon Adrian 👍👍👍

[@craigdoig9486]

18:21 great content again

[@LTeppler]

Watching hedge trimming is so satisfying. :) Virtual hugs for your dad!

[@casto-]

My first season this season of hedge cutting, 40hrs in and I’ve blown 2 pipes, replaced gearbox bearings and replaced a pipe end when the telescopic head are fell off (2 bolts sheared) 😆🤦‍♂. Regards to you farther, hope he’s well soon 🤞👌👍

[@IFarmWeFarm]

Jesus you had a tough first season lad 🙈

[@casto-]

@@IFarmWeFarm I also changed tractors just to spice things up 😆🤦‍♂️ I really need to find a proper job, like might be easy lol

[@SA-76234]

Praying for your father to get better. In Jesus name.

[@gordonwood3184]

When I owned my own JCB I USED TO WRAP BRICKLAYER,S DAMP COURSE AROUND ANY HYDRAULIC PIPE THAT HAD A CHANCE OF RUBBING AGAINST ANYTHING AND ZIP TIED IT SAVED ME A LOT OF MONEY IN DOWN TIME AND NEW PIPES .👍

[@dbcooper7326]

Your knowledge on some many topics is exceptional.

[@ronaldlucas5360]

You do very well and explain how you are doing.

[@denniswray470]

An exciting and informative video this week, blessings for your family especially your father.

[@Car-dash-Ian]

Hi Adrian hope your dad gets better soon. I find those screw in grease cartridges are only half full of grease in my experience.

[@IFarmWeFarm]

Get very little use out of them

[@seantormey3531]

I hope your Dad is feeling better soon.

[@Paul-vd2sp]

Giod luck to your dad hope he gets better soon. Family come first, take care.

[@abbiejones4222]

Love your videos because you know what your doing . Learn so much from your videos and so interesting has well they all are.

[@MrBen-uk]

Godspeed

[@mandyrobinson8353]

Send love & Prayers to you & all your family Adrian

[@franreynolds8506]

Hi regarding the visibility there is an extension for the head to move it forward.

[@enrico6744]

I hope he gets better 🙏 Adrian ❤

[@michaelolivergallagher6956]

Best wishes to your dad and get well soon

[@ianhaggart1438]

Never of thought your videos would need to have some trimming 😅😊 but Seriously Im wishing your Dad a speedy recovery and obviously keep him updated on the farm even if he's resting as we all know farmers never really rest and we have all respect and can wait.. .. .... Good morning sir.. always thought they were all pto powered oil pumps.. but maby thats because that's what we are on the lookout for... some of the smaller ones to go on to any of our tractors. 👌 cracking vid sir..

[@farmerslife2612]

Hi lad that was a great job with it and the best of luck with your fresion cows calfing to 🎉🎉🎉🎉

[@tommygrehan864]

Hopefully your father gets better soon

[@paulwarrilow3427]

Best wishes to your Dad, I hope he recovers soon. Always family first. I did a load of hedge trimming when I started work on a farm after I left school (many years ago) I really enjoyed it. The only part I did not enjoy was when I got a length of barbed wire wrapped round the flail!! That took a good while to extract.

[@IFarmWeFarm]

Had that happened, was good fun for sure 🙈

[@MarkSmith-vi3gt]

Adrian when I worked for a contractor we use to take the roller out for verges to stop it wrapping hope this helps if your model has one😊

[@ThomasOtoole-t1y]

Most people working hedge cutters keep the roller about 1 in from the ground I myself never use the roller more just drop it down and drive on

[@robdixon945]

Thanks for the show Adrian 🍻

[@yvonneward]

Best wishes to your dad great video once again 😊

[@colmanlong1032]

Great info Adrain.them hedgecutters were are a super machine.

[@bobuncle8704]

I’ve a feeling that trimming would be a job I’d love to do. Sadly, we don’t have hedgerows here in Canada.

[@markclark7660]

Talk about similarities. We traded our pa93 for a 5755 noticed exactly the same benefits as yourself lot easier to take on and off. We run ours on a MF7614. We mounted the up-down leaver on the offside door on the door rail between it and the glass, wee bracket onto the rail

[@IFarmWeFarm]

I might do the same, yes very easy to take off and put on. Saves a lot of time

[@arwelagrimachinery]

Really the single pump might been alright in its time used on something more basic , but the modern tractors now use the hydraulic oil to drive/move everything, heating it up itself without the extra strain of constant pumping through the spool all day

[@arwelagrimachinery]

Modern gearbox uses the oil to keep 4wd off (not a new thing I know along with PTO) , clamp the clutches for gears, work clutches for shuttle, work the hydrostatic steering (1980's and older usually had a separate steering pump) etc

[@Catherinemab]

🫂Thoughts with you and your family

[@Grandrad-Eifion]

Getting my Sunday fix while flying over Greenland at 35000ft. Keep up the good work and you really should invest in some tights for cold winter mornings 😂

[@stephenkelly2067]

Same move as me both great cutters. Only my 93 was totally independent

[@MOSSFEEN]

TASTY WORK there Regards to your Dad

[@jeremiahkearney5191]

Jas Adrian it looked like you have trouble taking the tights off too 😂😂

[@ilovetractors40]

Lovely looking trimer

[@richardfarenden1215]

We got a pa93 hedge cutter fully independent had it since 1988 perfect. Sales rep told us years ago semi independent trimmer will heat alot of tractor back end so since that that why our trimmer is fully independent perfect

[@colmanlong1032]

Great info,now I know, fully independent is the answer.

[@richardfarenden1215]

@@colmanlong1032 on my headgear cutter got four cables in cab for controls one pto on shaft that drive all the oil for the hedge cutter. If you have a semi independent hedge cutter and a oil pipe goes for the main head it will drain it from tractor back end on fully independent it just drain from tank

[@samuelrobinson9012]

Iv an old McConnell about 12 years now. Bought it of a neighbour so knew it worked OK, tho had done a lot of work. Haven't a friggin clue what kinda pumps on it😂😂😂, but it sure works well, with a very good reach.

[@richardfarenden1215]

@@samuelrobinson9012 the simple way to check if you got oil pipe needs to go back of tractor semi independent if no oil pipe not needed fully independent

[@MichaelConroy-f9x]

Adrian I have to say the mcconnell pa 5455 is the exact machine I would love myself, Looking forward to see how you find it, Best of luck with it, Thanks for sharing 👍.

[@James-wu6bi]

Prayers said.

[@megafabltd]

Fantastic camera work as usual 👏

[@Murphycats]

The hedges in Ireland are no joke! I was over there and driving a rental car around the countryside. While making a 3 point turn around, I bumped into a hedge. Not a big bump, just a bump. Lost my entire deposit. Lesson learned.

[@AD-hs2bq]

How kind to help your neighbor with trimming. It’s a big job.

[@john67654]

A very good morning Adrian

[@FirstnameLastname-qe3ry]

Hedge cutters are such an astonishing invention, so unique the way they work. Whoever designed that has the brains of 3 Einsteins

[@DmitryMurphy-p7h]

The reason why the rotor stops is because the more modern hyd- motors are a some what smaller than the older ones. the small motors are spinning faster but they lack the torque- thus, it is easier to stall them. regarding the oil over heating, I would be inclined to take the explanation that you received with a pinch of salt. The bottom line is that it does not take much of an oil flow to push a couple of rams in and out- I would be looking for a restriction in the valve chest or solenoid valve etc, Happy Hunting.

[@oisinkierancoyle5518]

You’re legally allowed to cut roadside grass verges in the summer time because nothing ever nests inside grass, nettles, thistles excetra.

[@johnhughes2113]

Only at road junctions can we cut grass (north Wales) the rest of the verge must be left to re seed

[@oisinkierancoyle5518]

@@johnhughes2113 The main thing is that grass grows back quickly again after it’s cut just like lawn mowing.

[@johnhughes2113]

@@oisinkierancoyle5518 yeh I know how grass works,, it the the council highways that make the rules

[@oisinkierancoyle5518]

@@johnhughes2113 And the local governments as well

[@billabong9215]

You allowed cut hedges too if the are health and saftey danger. Health and safety prevails everything.

[@kevinwittstruck8764]

Hi good morning I farm we farm from Indiana great video

[@prepperfortheages878]

Good purchase!

[@everestyeti]

It's ok Adrian your secret is safe with me, won't tell a soul promise. 😂😎 I'm always amazed when watching verges being cut, always think the drivers must have necks like on owl's. 😃

[@davidduffy3021]

Great video

[@ThomasOtoole-t1y]

There is a slip clutch in those hedge cutters that stops head turning when the meet an obstacles mine stops when sheep wire laps around it pa93 😮

[@paddy294]

Cracking video as always

[@padraigking5185]

Good stuff

[@willyfindlay4398]

Adrian, I know you are a neat and tidy man , but could you cut your hedges every other year to allow the plants to flower and fruit better for the wild life ? Great video.

[@IFarmWeFarm]

I agree, i should have mentioned this in the video actually. I Rotate my hedges each year so each hedge is only trimmed every other year. The roadsides are an exception due to saftey though

[@dronedairys7461]

Many’s the pair of tights you took off id say 😂😂

[@Wemoriginal]

Lovely hedge cutter that

[@gearsandtears7643]

Hope your dad recovers Did anyone suggest putting a decent oil cooler and fan on the oil return?

[@IFarmWeFarm]

No not really, I ran it for 6 hours straight the other day and it wasn’t very hot at all so for now there’s no real reason too

[@gearsandtears7643]

@IFarmWeFarm I ment on the old one fit an oil cooler

[@johnhughes2113]

If I remember right, you put guards on in previous years!

[@IFarmWeFarm]

Yes they’re all on there again, windows and bonnet. I think there a great job

[@Johntrait]

Pto speed Adrian some McConnell has 2 be in the 1000 pto

[@stephenkelly2067]

If your rotar on 5455 is lazier than your 93 hi power your pump or motor is worn I found opposite I buy them new use for around 10 years and change

[@IFarmWeFarm]

I think the pump and motor are ok, it’s just a different style of motor on the head, possibly a slip clutch. Had a few people on to me today saying theirs does the very same from new. It’s not really an issue and only happens on the longer grass.

[@rogerpeak3752]

@@IFarmWeFarm Cutting long grass with the flails rotating downwards is very power consuming because the cut material is thrown forwards onto the grass yet to be cut, whereas if you have the flails rotating upwards the cuttings are flung under the hood and onto the ground ahead of the roller ( which should always be set below the cutting height of the flails when cutting on the ground, and above when doing hedge work ). Hydraulic roller height adjustment has been one of the biggest improvements in hedge cutter design over the years.

[@SEPK09]

Thunderbird 3 :)

[@Sean-g5l]

I really want to be a farmer I play farming simulator 22 ever day just so I know what is what I know what ever thing is I am planning grass right now

[@tomconlon605]

My favourite anglo-Irish word "Fronint" at 10.30 mins (translation for urban viewers "in front of")

[@paddykelly656]

'Fernenst' being the Donegal version 😂 Best wishes to your Dad, Adrian.

[@phil6465]

We use “Furnent” in North of Scotland.

[@mickgaffney5068]

Would have kept the 93 and got rid of red for blue

[@IFarmWeFarm]

Never 😀

[@Cambridgeshire-m1x]

Could it be possible the pressure relief valve on your new trimmer is out of spec and possibly the reason why it's not as Powerful ? Another great video thankyou

[@IFarmWeFarm]

It’s only happens the odd time when it’s in real heavy long grass, think these newer ones have a slip clutch

[@Sean-g5l]

Hi

[@finbarreburn5112]

In mainland Europe and The UK local authorities compensate their farmers for roadside trimming, Not so here, thanks to Not Fit For Purpose IFA. 😠 😡

[@keithturney3667]

Prayers are being said Adrian god’s speed for your father’s recovery.GHTYAY

[@brendanmeegan6444]

trow that roller off ul b fit cut bote ways the 93 woda ben 60 hp