We try TikTok engine repair method (heat resistant paint)

Grab some G54 merch here - www.en.garage5...
Promo code 'garage54'
In this episode we try something suggested by our Russian viewers that we thought was pretty funny. Hope you enjoy!
For business inquiries: [e-mail]

[@dimitar4y]

That actually ended up being a good exercise in engineer's blue - a machinist technique for checking wear and tolerances by painting a surface and watching where it gets scratched.

[@compudude86]

We called it "Prussian blue" when I was in mechanics school, but I think political correctness changed that

[@dimitar4y]

@@compudude86 fucking hate PC.

[@Jakejhone]

It's still Prussian blue. It's a brand name of bluing made my permatex I believe

[@geemcspankinson]

We called it mechanic's blue here a few years back

[@ducewags]

@D Hristov Dykem steel dye, in red, green, blue and yellow brush on or spray type. Fun fact, the machinist will use it more then the engineer. Die and tool makers will use it more the the machinist. One wonders why people call it engineer blue?

[@ryanreichardt518]

I told my wife I am certain you guys all have a daily meeting, eat and laugh and pitch bad ideas in an open forum, write down those ideas, place them into a hat pick one at random and roll with it. Am I close in that assumption? If so please keep doing exactly that...I think you guys would be fun to hang out with. The car guy ex metal fabricator in me enjoys what you do.

[@thee_number_six6227]

No, they add in viewer recommendations in the hat too.

[@rbmwiv]

I doubt I will ever paint a cylinder. Just over boar or hon the cylinders and use appropriate rings. Awesome video guys. I always enjoy seeing what Garage 54 is up to. You do some very interesting projects. They are great. I have been a mechanic for 30 years and a lot of what you guys do I have wondered but never had the time or drive. Awesome videos guys!!!!

[@UPsideDOWNworld321]

ya i love seeing dumb idea like this stuff, you never know they may fall on something one of these days that works great

[@AshTag]

🐗 🍯

[@Rawdawgggg]

Have you ever wanted to buy some piece of shit beater to do all these crazy ass things to? Like granted, I would never do shit like this to my actual car hahaha

[@mattquarles7029]

this is for sure a mechanics fantasy channel lol. cant believe they have welded 2 separate motors together and made made their own cranks and cams and they all worked. crazy stuff.

[@mattquarles7029]

i also noticed the one he said was down on compression numbers seemed to come out of the car with the rings with the openings lined up. probably explains the low numbers. rings were not put back in correctly possibly?

[@nathanhinkle1329]

Absolutely love seeing you guys do crazy mad science stuff. Thank you!

[@the_kombinator]

LOL science and tiktok should never be used in one sentence.

[@the_kombinator]

@melonbobful Betar,

[@MadScientist267]

​@@the_kombinatorI'mma have to agree lol

[@Kozsla12]

Filling the tank with break cleaner? Is it working or not? Lets do it Garage54! 😂

[@drewsmith3673]

To get superior atomization (and finish), just use paint as a fuel additive, and let your injectors do the work. I usually shoot for about 40:1 - 50:1 depending on desired (re)compression ratio.

[@hamood1234fool]

I don't know if you are joking or not but wouldn't it clog the injector? lol

[@n0x3n]

@@hamood1234fool I havnt tried this but I dont see how it wouldn't clog them. Granted the adhesive properties of the paint should be ruined by the gas especially at a low ratio like 50:1 but still. I cant see this having good results

[@drewsmith3673]

Yes.

[@Elaba_]

So you paint the injectors after you shot them with dilluted fuel additive?

[@drewsmith3673]

@@Elaba_ Paint is the fuel additive, friend. 😉

[@cobravids]

This reminds me of the time long ago when J.B. Weld made a big deal. People in parts shops were reporting that you can use it to repair an engine block. So, my dad thought, if it can fix a block it can fix a cylinder. Her used JB WELD to fill in a deep scratch a piston made when it came apart. (1978 Datsun/Nissan 280Z) He honed it out and it all looked good. We never reopened the engine to see if it held... something tells me no.

[@TBPony]

You're such a fun channel to watch for motorheads, thanks for the constant hard work you make my lunch breaks fun again

[@zs3pv88]

Nice experiment! Would love you to try kitchen scouring powder into the intake wilts the engine is running. Apparently the scouring powder will "hone" the cylinders, allowing the rings to bed in/seat again, and because the powder is a chemical, will burn off after doing its job leaving no residue. Would be awesome if you could try that one!

[@BucksSuperStereoWorld]

That does sounds like an interesting idea...however, it doesn't sound very feasible. Then again, you never know until you try, right!?

[@merlin5476]

Can you still purchase VIM or AJAX ?? If so, dont suppose you could grab me a box of OMO whilst your there.

[@hippynurd]

Thats why I love this channel, even when its clear that it wont turn out well, yall do it anyway to find out what happens. Curiosity is a beautiful thing to behold

[@Cloud-zq8mf]

I have tried this methode. It's cause more damage in the engine. More scratch in cylinder liner/piston, ring piston jammed, oil dilluted, etc. Paint is not oil/fuel resistant. And it's not friction resistant. In first minute with light operatin is ok.

[@daviedood2503]

Yea, regular paint would just melt away like glue. This is suppose to stay intact bc it's heat resistant

[@Cloud-zq8mf]

Heat resistant paint is the worst. It's become hard, but not strong enough to survive frome friction. It's causing more scratch in both cylinder liners and piston.

[@Cloud-zq8mf]

scratching like dirt (hard) entering cylinder

[@ronniemaeker9102]

An actual Krylon overhaul... I can now die...

[@Billhatestheinternet]

"But I saw it on the internet, it's gotta work and be true!" When Vlad starts laughing at even the concept of some moron's suggestion, you know it is doomed to fail in spectacular fashion.

[@warrioralumni08]

Before I even watched the video, I just knew it’s not that simple at all. 👍 If it was, everyone would do it.

[@blackterminal]

vlad would be a awesome uncle at your Christmas dinner. His big laugh would make the day happy no matter what.

[@jordanwebster5077]

I really appreciate your merch, also the way you present the advertisement. I hope one day soon I can afford to buy something soon

[@Day-Cab]

Have looked at various Garage 54 videos. The content is interesting to watch. I do not see any political bashing. As an old army vet we considered Russia as the enemy. You seem to be good people. Thanks guys.

[@inmyopinion6836]

So glad you haven't been sanctioned. Just like us, people are good, politicians are the problem.

[@edwardcasper1478]

You do your job very well brother you obviously know what you're doing big thumbs up

[@C-M-E]

There's an aerospace version of this stuff, though it's heat-cured and cycled at least three times for proper application. Also of note, it's normally used on static surfaces without direct contact, normally as a heat barrier to melting things that are either in motion or in an exhaust housing/tube but not riding against another material. I've also seen a race shop use it on the top of pistons, though again, this is a heat barrier and not a contact surface. I've used a ton of it on turbine housings and for that purpose, it's quite excellent. Also not too shabby on firearms, where heat is momentary but contact surfaces are fairly minimal. Applied thinly, it's a wear item.

[@imronson4366]

Modify a engine to run upside down

[@feelingold2995]

🤣🤣

[@gabrielv.4358]

Another AMAZING Video from the BEST Car Experiment channel!

[@fuffoon]

Another brilliant idea from TikTok!!! I'll have to pass this one on to the Mercedes garage that I visit.

[@susanhodges9447]

I once used JB Weld to get rid of scratches in a bore. Worked too.

[@Elaba_]

Just before you sold it?

[@-.Sebastian.-]

I really like the content you guys upload. The unimaginable things that could be done to an engine/car, you guys do!

[@LordCakeskull]

perhaps a good follow-up test would be to coat the cylinders with the black paint, then lightly run a cylinder hone through each one after the paint as cured to leave only the scratches filled with paint. It would make the scratches show more obviously, and would avoid the rings being fouled by excess paint.

[@joepublic2894]

Good video. A WAY to make guys think about the sealing of piston vs rings in a cylinder. I believe the PISTONS job is to hold the rings in place perpendicular to the cylinder and transfer power to the rod and crank.PISTONS should never contact the cylinder walls.The oil and clearance prevent contact.The rings job is to seal so THEY >DO

[@HiFiasco]

This takes the idea of doing a Krylon Rebuild to a whole new level

[@-Jethro-]

Never heard that term before, but a complete picture immediately forms in my mind. Love it.

[@schumannresonanceswithverte]

107% proof of a failed idea. Thank you for doing this.

[@josephfbuck]

I liked and I shared on Twitter I was laughing so hard I seen how you was trying to tell if this is a video coming off Tik Tok and trying to keep the smile off your face ear to ear I thought you was going to try and laughing any second

[@ruatahanghal5121]

From my own opinion the heat resistent spray paints are absolutely useless thanks for the experiments you did for all. The viewers, thanks to your important experiments😎

[@Ne7naKedah]

I have an experiment for you, how about installing break pads as clutch material for manual transmission?

[@tshattuck21]

I love your videos you gentlemen do some wild stuff and it so amazing

[@WorkingBeard]

8.1k views as of this comment, only 845 likes. C'mon guys and gals, quit being lazy, smash that like button and support these guys at Garage 54!

[@ElectronikHeart]

They didn't change the rings did they? I don't know... Painting the walls seems like a pretty stupid idea. But jb welding and honing them leaving only the jb weld on the deep grooves seems to work.

[@mikestinyshedofdreams]

well, the idea came from tiktok so.....

[@samvhell9104]

Attends, mais tu fais quoi ici mdr

[@theshuff]

depuis quand tu t'es mis a la méca ? :D

[@ElectronikHeart]

@@theshuff Ça fait des lustres, mais comme j'habitais en ville j'avais pas trop l'occasion de pratiquer ces derniers temps. Là ça fait dans les environs de 5/6 ans que j'ai repris.

[@pipperlefermier5369]

C est incroyable de te voir ici, vas tu reprendre les vidéos YTB?

[@Touwtje]

Very cutious how (well) you degreased before painting though.

[@rodney1818]

I already knew it would not work but you guys always make good videos

[@sacr3]

The gas is inside of a cylinder go well above 2,000° Fahrenheit, the cooling system keeps your engine quite cool comparatively speaking, but the thing is the materials used are all typical metals you would expect, like iron and aluminum, whereas paint is not the same structure as a metal. Metals can transfer and absorb heat energy very fast, that's why metals feel cool to the touch. It is not because they are colder, they are typically the same temperature as room temperature. It is that it is absorbing the heat from your finger at a fast rate because it's conductive. Paint on the other hand isn't so conductive of heat, by the time the heat energy transfers through the paint and is absorbed into the metal and then absorbed into the water, there's already too much heat built up in the paint waiting to be absorbed by the cylinder wall. The paint then burns up very quickly, in some areas but oil and fuel contribute to the cooling process, as well as the influx of cool air. So only hotspots would burn off the paint, well hotter spots Every engine has a thrust side, when that crank arm comes up it comes up on an angle and pushes at the bottom of the piston on a slight angle, pushing one side of the piston against the cylinder wall a little harder than the other. This results in one side of the cylinder wall being chewed out a little bit faster than the other over a long period of time. The oil should create a nice thin layer to prevent too much metal on metal contact if any at all, but that oil is put under a lot of pressure and if the materials aren't capable of handling that pressure like the paint, it will give way and the oil will displace it. When it gives way it will lift up and get scraped away It would make no sense at all to use paint, but I am almost sure that 80% of the people here already knew that. instinctively when you see explosions and metal moving around at those rates you would never trust a thin film of paint to be able to withstand that environment. If you ever disassemble your engine, borrow some tools from your local auto store and measure your cylinders. Make sure they are within tolerance of manufacture specs, if they aren't you can bore it out, remember that you want to scratch up those cylinder walls with the proper tool. Back in the day they tried to use Chrome and other metals to make the cylinder wall as smooth as possible and they only found that the oil wouldn't stick and they would burn up their rings and pistons. By scratching the cylinder walls lightly with the proper tool, you make the walls very sticky for that oil making your engine live a very long life. Torque and torque patterns are extremely important, if you torque from one side to the other side and properly you may pinch the gasket and create a spot for the oil or gases to work their way out. And remember to always do your best to cover all holes with tape or clean rags, the last thing you want is a washer or cotter pin, or even an insect crawling into one of those holes and then you sealing up the engine and wondering why you have problems later. If you grease your bolts, your torque specs change. Always make sure it's specifies you lube the bolts and then torque, otherwise look for a torque chart displaying the lube torque as opposed to dry torque. I am high as s*** right now, I don't know why I'm doing this

[@Elaba_]

Don't fall.

[@haywoodyoudome]

Stay baked.

[@sextoyrepairman1621]

Hell ya it gets very hot, 500 degrees the guy didn't even know wtf he was talking about

[@rabidbeaver167]

Translator does such a good job,

[@1one3_Racing]

Looks like the pistons were reversed between tear down and assembly based on the numbers.

[@lawrenceveinotte]

Try "Bon Ami" powder cleaner, old guys used to do this when the rings got bad on an old engine, you get the engine running and sprinkle some down the carb.

[@tomadams6540]

I’ve heard about that

[@RicardoRamosRetrocomputacao]

In my experience, the only hack that works is to change the piston rings for rings that are a little thicker.

[@skylined5534]

Fresh rings and a hone? Definitely worth a shot!

[@High-Overlord-Pugula]

yes, spray paint inside the cylinder is always a great way to fix the problem

[@blackholehole459]

the aproach technic making the gap with tint was nice but you must use expensive coal that can hold friction and temperature anyway.. was a nice test

[@wilyceyote]

You guys are nothing but shade tree hillbilly mechanics you guys are good entertainment ha ha Love it

[@countryracer69]

At first I thought you were doing the old trick of painting a head gasket to reuse. And of course that works well. As an engine builder I cringed this one! The silver stuffed into the rings closing up the ring to groove clearance. That attributed to the added compression. And moving the rings around while they were out likely had an effect as well. Interesting results but revving on a shop floor wont show the heat and EGTs that it would have under load. And that would roast any residual paint lol. Whats next?

[@innovate.integrate.transfo6169]

Interesting experiment and I really like your thought processes. I wonder if 2 things would have actually made it work better. 1) a very light hone on the cylinder walls to get any high spots or excess paint off. Just lightly to provide a nice, smooth, sealing surface; 2) some type of aluminum treatment of the pistons, like an etch or anodize, before painting and then a VERY slight wet sand with some 1000+ grit sandpaper to smooth out the skirts. Finally, maybe even new rings because let's be honest, who is going to tear down a motor and then not at least replace the rings and do a minimal honing on the cylinders?

[@aronbraswell1589]

you guys do crazy great stuff. could you cool a lada engine with refrigerant instead of coolant?

[@classicpontiac37]

I would love to see that and being a former residential HVAC tech. I couldn't really think of how you would do that. Just pressuring the system with straight refrigerant wouldn't work.

[@nathanschneider8586]

@@classicpontiac37 maybe by using the engine itself as a condenser? Idk how you would be able to compress it tho

[@joelpichette]

they did it on the russian channel

[@nnnnnnnnnick5557]

If you had the right heat exchanger design you probably could

[@MegaDirtyberty]

I would imagine the lady's are already cool towards you.....

[@swagmanexplores7472]

Just found this channel - instant sub !

[@haulngrassracing]

“Cylinders only get to 500” 🤣🤣🤣🤣🤣🤣

[@mostlymopar]

Yeah, a couple thousand degrees low.

[@sc1338]

I don’t think it gets to thousands. I think 900-1100 around there.

[@derekhobbs1102]

For years I worked for a guy that would spray head gaskets with stove paint. It worked, and never had a gasket blow.

[@OpenLogicEFI]

It's my professional recommendation that this video was amazing.

[@G-Issue]

There was a Teflon gasoline additive that hit the market about 40 years ago that worked well, it disappeared shortly after its release.

[@Ski_3_p_o]

Because Teflon is one of the worst things ever for the environment

[@dragan3290]

Multiple coats on top of the piston to raise compression!! Lol 😂

[@ImTheDud3]

Add one more compression ring on each piston Will be intresting video

[@Elaba_]

LOTCR (Lord Of The Compression Rings)?

[@1danny2k]

It's done on some old diesel engines. They run a long long time

[@ferdi9697]

Crazy they have actually made this today

[@thee_number_six6227]

Might work to help hide defects for a quick sell but I wouldn't call it a long term fix, maybe look into plating or adding an Oxide layer to the head and pistons finishing with a halfway decent polish

[@MrBEA-wp2pf]

Hey man, it on the internet....it must be true! 😁 Thanks for another great video!

[@jamesmullen4308]

I agree with most, on the craziness of this idea. And it worked as expected. However I wonder if cera-coat would work to fill in the cylinder scratches better and last? Also im curious, did you reused the old rings? Or new?

[@dimitar4y]

cera-coat will crack from the heat/vibration and flake off, AND scratch up the piston/bore something nasty.

[@jamesmullen4308]

@@dimitar4y I disagree. I've use cera-coat on engine internals multiple times. On small engines though. And it works great on pistons, heads and the block to help with heat. Never put it in ring glands or on cylinder walls yet, but id like to see it tried.

[@jamesmullen4308]

@@dimitar4y not to sound rude but do you understand cera-coat is a ceramic coating? I believe, but not sure, it's applied like powder coating. It's a pretty strong bond.

[@Mastermindyoung14]

@@jamesmullen4308 it's abrasive. Fine sandpaper will eat rings fast.

[@ILIKE400HP]

Some high temp paints need to be heated to cure it wonder if they used the Oxyacetylene or something to cure it before assembly it would hold up better

[@twocvbloke]

Might have worked better if the parts were baked to harden the paint, heat-resisting paint doesn't cure fully until it's heated up, but then again, it probably still wouldn't work anyway... :P

[@johnbelwell2461]

Well using thicker engine oil does just that in the first place, the thicker it is the better it paints the pistons and cylinder bores.

[@tadeashorak7584]

Until a certain point - the higher viscosity oil will increase pressure but lower the overall flow. Tried it many times and with thicker oil, lifter tick was much worse...you can starve and destroy the entire engine if you go too far.

[@johnbelwell2461]

@@tadeashorak7584 if they're bad hydraulic lifters chances are a 5w oil will get them operate much better, however for increasing compression on an engine, an oil that leaves thicker film on the cylinders tends to fake the result of an increased compression as far as that oil is used. However an engine that takes advantage of a thicker oil compression wise, chances are would take a favor but then would be hit on a different spot which is lifter operation, oil starving, etc, to the point parts might suffer from extra wear, including the oil pump, not to mention it wont rotate as freely and would cause extra drag when revving. A compression so bad it needs thick oil to work, more or less means the engine needs an overhaul anyways.

[@halrhoads6194]

Engine Restorer, works like a champ! There are some reviewers here on KZbin who have tested it - check the one on Project Farm for an example. Shocked him how well it worked. I myself tried it decades ago, with great success, on several cars.

[@chaosopher23]

The guy in the background is thinking, "He's at it again. Better open up."

[@3dartstudio007]

Excellent myth busting! Good job guys!

[@amdintelxsniperx]

similar idea to ceramic coating sleeves it fills in scratches . you will still need to bore the sleeve but it will run for a while lol

[@FixedAFT]

also sweet silicone on the headgasket!!!!!! yall crack me up lmfao!!

[@davec7]

should've replaced the valve guide seals......

[@ep5acg]

Use Devcon steel (liquid steel) like machinists use when they mess up. The burnish the cylinders and polish the pistons so only the scratches and rubbed spots are filled.

[@samlaska-wolfe6717]

Aussies will know this is a Whole new meaning to a dulux rebuild.

[@ΕυστάθιοςΑναστοπουλος]

always the best videos!! greetings from Greece!!

[@jeffclark5024]

“ make sure to get all of the scratches” hahaha if this stuff worked engine builders would be out of business

[@pickledpigknuckles6945]

I have seen folks use rear differential oil in a oil burning engine with blow back issues like this one meaning low compression causes oil & fuel to breech the piston sleeves going on both optional wrong directions. Also have seen folks use aircraft grade 50 weight oil

[@jbrucksnc]

He did have a problem with his methodology. This paint that has a high ceramic content in it needs to be cured by several heat and cool cycles starting at low heat and then gradually increasing heat. Without the curing the paint would not be able to withstand the friction and rubbing of the piston rings. I'm not saying this paint would do anything to increase compression but the methodology of the test did not follow the instructions of the high heat resistant paint

[@knicklicht7945]

There are heat resistent paint's that do not need a heat cycle they cure with time. But pretty sure they dident use this these type of paints

[@drd0114]

Bingo!

[@creepingjesus5106]

Never mind anything you apply having to be petrochemical resistant and so on. It isn't just temperature that makes the cylinder an incredibly difficult environment.

[@knicklicht7945]

Hammerite would have worked

[@dimitar4y]

ceramic is harder than steel, it'll scratch the piston real bad.

[@geoflo61]

I think you have to take the edge off the rings so it wouldn't shave the paint on the bores and then it should work..............???lol. This is a true story. Dad and a relation did a rebore on a ford flat head V8. New piston fit was so close that, to see if it would work, they assembled without rings. Well the result was a lot of smoke filled the workshop very quick but, it ran. None the less they stripped it to see what was the damage if any. Apart from a bit of scuffing, cylinders and pistons, it was ok. Assembled correctly and away it went. Oh they did polish the bores out first. Late night and work next morning didn't help was the result.

[@DarkestVampire92]

Well, it DID improve the compression of the three cylinders that were badly lacking it. Not by much, but hey. I guess you should only paint the ones that are very badly damaged and not the ones that are still good, or you make those worse.

[@CodyT362]

We don't actually know what caused the increased compression... it could havw just as easily been the rings being put back in differently

[@Dr_Wrong]

Many high temp paints require 'cooking' in a progressive series for rated performance.

[@kennethsrensen7706]

ha ha , never trust anything from tok tik , its gak gak ... Edit - I was watching this one on your Russian channel , keep up those crazy experiments , it give us all a better day when we have fun . Cheers guys .

[@rodsvintagesxschannel.3095]

Greetings from Canada! Hope your doing Well Vlad, i would like to see an engine test just using engine oil stabilizer as lubricant... No oil.... To see if the engine would run and last with just ( engine oil stabilizer or engine treatment " THICK STUFF?"

[@Velktron]

I think ProjectFarm did a similar test. It's basically like a thick-ish monograde mineral oil like SAE30 but it didn't provide adequate long-term protection alone.

[@rodsvintagesxschannel.3095]

@@Velktron yes...but leave it in the engine as lubricant not drain it out See if a low compression engine would build more using it , see if the engine would run smoother and quieter?

[@DarkLinkAD]

@@Velktron Sae30 isnt thick. Sae30 from Rotella actually had a decent cold pour point

[@Velktron]

@@DarkLinkAD Well, it "looks" thick when cold if compared to a multograde oil, but somehow In.PF's testing it managed to offer almost no protection, if used by itself.

[@DarkLinkAD]

@@Velktron Not all sae30 are created equal

[@thedude7726]

Ive used ceramic exhaust paint on the inside of head pipes with great results. And ive used it on exhaust runners of cylinder heads on mini bike and go kart engines and the carbon cleans off super easy. Ill try a piston top and combustion area of a head on my next rebuild for shits and giggles

[@funkworthrollin4959]

I'll be waiting.

[@eventeresting1142]

Replace suspension with solid pipes, use fat tyres and take a trip around town (track if you can)

[@leecollins6224]

That's a good way to kick up piston rings with paint that's why you got better compression

[@crashbobsquarepants7323]

How high compression could a lada engine get with modified pistons and would you get huge power? F1 cars are stuck until hot oil and water is pumped into them to unstick the pistons

[@tinkmarshino]

Now that was a real fun one guys! Well done! Теперь это было по-настоящему весело, ребята! Прекрасно!

[@ThePeca1988]

I dont know, if you allready need to disassemble the whole engine, it makes sense to do a normal repair. The paint isnt any good on such places where you need durable stuff, unless you have fun doing this daily 😃

[@superbikesavage9500]

That wasn't the point of this video dum dum

[@ThePeca1988]

@@superbikesavage9500 first off, that isnt a way to answer someone you got no clue about. Second, if you wish to teach something, then go on, explain yourself. What is the point of the video then?

[@superbikesavage9500]

@@ThePeca1988 to show what hapens in a engine when do replicate a dumb ticktok. They had no intention of rebuilding this engine. They just wanted to put that ticktok to the test. Are you dense ? Or are u playing because the intent here is pretty obvious

[@sigmawarrior.fokeryou]

Vlad, there's actually the Ceramic treatment, you could give it a try.

[@cousinjohncarstuff4568]

Flex Seal to fill in the scratches in the piston!

[@freefall0483]

Good to see you wearing yellow and blue

[@FangBlah]

Try a high content zinc primer.

[@XsLordSidious]

Love every one of his videos, hes a funny guy :)

[@sammertkoeli8281]

Love your videos!

[@tedgaida156]

Did I miss it, or did you treat the pistons/bore to ensure full adhesion of the paint?

[@drd0114]

Try to hone the cylinders, then use the ceramic paint that has to be heated/baked to cure.

[@chrisgabbert658]

Used to use white high heat on the head gaskets ,it never failed me .🤷‍♂️

[@sweetcarbro]

Should do this same test, except without using paint on cylinder walls. Just spray black on pistons only, just for hell of it!

[@dominicthomas4111]

Before I even watch the: video at 1:19 I love how he clarified that the viewers wanted this so he he didn't have to take credit for such a stupid idea lnaoo ay tho he ain't conplaing he doing what yall want but let's be real come up with better ideas people these guys are capable of anything

[@de_beierkechtenfuzzi3832]

you should really make a v8 or a 8zyl boxer outmof 2 lada engines, I think that could be fun😂😂

[@doraexplora9046]

God you guys try some crazy shit ! Love it !!

[@MrMini500]

You guys should try spaying heat resistant paint in the intake as it runs and see what happens

[@sekovittol3124]

I coated a worn bike rim (braking surface) with a thin layer of JB weld, it worked pretty good. How would epoxy Like JB weld, or concrete repair epoxies work in cylinders?

[@OsWikiVibe]

It might work if perfectly degreased before applying.

[@kinadafurry7353]

That wuild work great

[@albertdehn8381]

What would happen if you were to add a ring to the lower piston to balance the piston thanks for sharing 😀❤️

[@thomas316]

They do a process called "metal vapour deposition" on some industrial engines that works on a similar idea of replacing material that's been worn away by friction. Edit to add: Might be able to do it via electrolysis in a ferritic solution though?

[@skylined5534]

Is that where they kind of 'spray' heated metal particulate onto a heated part? Saw a guy use something like that on a machine bearing journal and it seemed to work really well.