Webasto Air Top 2000 STC Installation & Tips

In this video we unbox a Webasto Air Top 2000 STC gasoline heater, show you what all the parts are for and share all our tips for installing these Webasto heaters into your adventure vehicle!
***********************************************************
** Updated Video for SmarTemp 3.0 Controller Wiring **
***********************************************************
Shortly after we produced this video, Webasto upgraded from the 2.0 version of the SmarTemp digital controller to the 3.0 version (check it out in our store). So, the video below details how the wiring for the SmarTemp 3.0 works which is different than what we show in the main video starting at around 32 minutes.
• Webasto SmarTemp 3.0 C...
Webasto heaters in our store:
www.vanlifeoutfitters.com/cat...
Blog post about buying a North American kit (not a European-sourced kit):
www.vanlifeoutfitters.com/ins...
Duct/Vent configuration tool:
www.vanlifeoutfitters.com/sto...
More about the SmarTemp controller:
• Webasto SmarTemp Contr...
Find us on Social Media!
Facebook: / vanlifeoutfitters
Instagram: / vanlifeoutfitters
Pinterest: / vanlifeoutfitters

[@gabriellec.3811]

The most comprehensive Webasto video out there. Everyone should watch this before installing!! There’s a lot of misinformation out there on these, but VanLife Outfitters breaks it down and gets their info directly from Webasto - And I’m pretty sure they’re certified Webasto techs too!! Thank you Zach and Josh for putting out this excellent and much needed information!!!! Keep up the great work!

[@Armandooooo]

Just installed mine, it is working fantastic and much quieter than expected. I purchased one from overseas but ended up selling it and got your kit instead. Very happy with the very clear made-for-US-audience instructions and working with a very simple and easily reference-able wiring harness. Bluetooth with the SmarTemp 3.0 works great! Peace of mind above all with your customer service and an actual warranty is the cherry on top.

[@jtechcomputers]

The 14:55 tip of the polarity for the fuel pump no mattering, saved my anxiousness about getting it the wrong way around... Thanks heaps!!!😅🎉👍🏼👍🏼👍🏼🤯

[@dndragoi1]

One of the most useful videos I’ve ever seen, period. Thank you!!!!!

[@bobstransitvan3053]

Very helpful video. I couldn't find anywhere that said if polarity was important on the wires coming out of the heater for the fuel pump, but you made a point of it. Thanks.

[@stunmi]

Thank you so much, I ordered one of the kits off amazon and as soon as I seen your video I cancelled that order. I will be ordering from you for sure

[@hoosierinthewoods]

This is by far the BEST and informative video on install for gas van. I’d love for you to film another with a gas Sprinter. My 2023 sprinter will be here in May and you mentioned it’s wonkie. I will be ordering from you! 😊

[@llinnick]

Awesome! I was considering mounting my Webasto heater in this location, but wasn’t sure it would fit. So happy that I found this video. Great job!

[@danawilson171]

Thank you for taking the time to make this video in such accurate detail. Much appreciated. So much bad info out there.

[@djhakanselcuk3059]

Thanks for your video

[@applesbighatranch6906]

I believe one can use the fan-only mode with the simple North American rheostat controller, but this is done by switching a pink or purple companion wire (same loom branch belonging to the controller plug) to ground. Thanks for your video chock full of great and professional experience with these heaters. I'm installing a diesel 2K Webasto Air Top into a 5' X 10' "square drop" off road camper.

[@applesbighatranch6906]

To clarify two things: "squaredrop", as in "trailer" - and the fan-only wire I was thinking of is the red wire in the controller branch in your video. Fan only will operate when this red wire is connected/switched to ground. Cheers.

[@813fabricationanddesign]

Great video!

[@Tymen777]

Спасибо! Thanks!

[@ashqelon7267]

Good to point out the difference from the European VS the USA ver. I didn't realize this and was leaning towards European (not realizing the delta) and would have been pleasantly Dis-pleased ..

[@geekazoid47]

Great video however your specific installation (11:43) has the cabin air inlet beside the heated air vent which is identical to the pictures in the installation manual that say DON'T do this.

[@GarmiOffgrid]

Excellent excellent video. It’s really tough sifting through all the forum crap online with European Russian heatso Obsolete version one version three Amazon blah blah.. i’m glad I read enough to have enough sense not to buy from anything other than a North American distributor. Crazy confusing

[@danawilson171]

@vanlifeoutfitters, thanks for the excellent video. For a Sprinter with the Webasto under the passenger seat, do you run the fuel line over the exhaust heat shield? With a search, that's what I'm seeing most people do, but it seems skeeethcy to me, especially in my gasoline Sprinter (not diesel). I got some heat shield tube for the fuel line, but it still seems like a bad ideal. Thoughts or ideas? Ordering a SmarTemp3 from you asap! Thx

[@simonlambert2246]

Super video! I noticed on the wiring diagram you showed with the smart temp controller you only have a 5 amp fuse at the control panel. I’m assuming that when you have house batteries and a fuse panel you can just remove the inline fuses and use an appropriately sized one at the panel? Is that correct?

[@VanlifeOutfitters]

Glad the video was helpful! You can either run a branch circuit wire up to where the heater is located and then tie the various 12VDC negative and positive connections to that and keep the fusing on the wiring harnesses - we show this using a WAGO/level lock connector. In our case there is a fuse on the DC load center feeding this circuit as well so it's fused twice. Or, you could remove the fuses from the harness and simply fuse the branch circuit feeding them appropriately.

[@cookiecracker6266]

Nice video. Maybe you can help me with a question. I installed a Webasto heater in my truck camper, but it's only connected to an independent lithium battery. Do I need to ground it to the truck bed? since it's not the truck's battery just one big battery connected directly to the heater. Thanks.

[@kenwortheybilz1075]

The video said hooking into ford transit gas tank was so difficult they won't even show it. Anyone have a link to a video showing how to do it?

[@michaelfrymus]

I have this installed and its been running fine for a year now... But, I now need to do mods on my vehicle which will alter the exhaust. 22:15 I have this installed where the exhaust pipe runs under the frame of the vehicle and then out past the body. Everything is in a downward slope, like in the video. But, I am removing the stepping boards from the side of my vehicle, which will make the body of the car much higher. Meaning the pipe will not go under the frame, and it will have to go back up about 6" to the edge of the frame. I know I have to drill a 4mm hole at the lowest point, but will that be an issue still if it goes up about 6"?

[@jefflinnell8492]

Does anyone know what a wbuss failure means ?brand new unit first time turning on I get that failure display when I turn on the digital thermostat.

[@ARIESELNATH]

Hello what about smell of oil or grease /something/ after webasto installation. Will it go away ? It smells when I enter car.

[@dfanman1]

To my disappointment I have one of the overseas Webasto heaters, am I doomed with this thing or what? Is the quality not there? I am worried now. I wish I knew then what I know now.

[@cymonizr]

You can maybe stop saying that you are a North American provider, you dont even ship in canada...