Webley Nemesis

[@stevezephyr]

Bought the .177 version, got it on offer at McAvoy's £110. Nice gun, accurate, comfy although a little heavy. Not got the power of my HW45 but accurate over 10 yards, a cracking plinking gun, different looking and different cocking and loading, the tandem magazing works great, nice addition to my collection.

[@henrya3530]

It's a nice pistol. Out of the box (and using the supplied open sights) I got 50mm grouping at 25m so I'm happy with the .22 version :-)

[@AAROnair]

Enjoy the video and don’t forget to visit www.vector-air.co.uk and www.aar-OnAir.com see you next week. Follow us on facebook.com/andyairgunreviews

[@clangerbasher]

Interesting gun. Nice review, as always. Don't like CO2. (An aside: Somebody out there must be looking at building a HW44 competitor for less than £650-ish, but more than the Chinese pistols, something about £350 to £450 say......Must be a gap there.)

[@ReMarkAbleMagic]

I had one in .22, loved it for all of 10 mags, then the CO2 seal burst and I sent it back. Too bad so many have this experience. My 2240 never leaked.

[@bjornbjorn8235]

Thanks for sharing. I would like a 2240, but i think i like the Nemesis too. About the silencer, i would be more interested in a barrel extension.

[@trebor4460]

Had the Pistol for 24 hours and its going back tomorrow , yep, its leaking... actually enjoyed firing the 20 pellets before the seal let go.. i think adequate is a kindness to the multi shot magazine but single shots fine.. pity about what seems an inherent fault with the air leaks as i actually liked the bolt action and form factor but come on webley, get the quality control in order..

[@jimjordam]

This is a great pistol, tested mine today with a red dot and silencer, accurate and very quiet. Love it.

[@06Cazares]

Where did you get the silencer? If you don’t mind me asking?

[@jimjordam]

@@06Cazares solware, airforce one get shorty

[@jdjohn4360]

Looks like a bit of alright 🎯20 cal would be my choice

[@robduddridge8052]

I have the .177 version I agree it's not best looking pistol but it's an interesting change to the norm and with my silencer on it, it's dead quiet and with a multi or single shot option it's a good back garden plinker . Another great video Andy.

[@jameskohlenberg5063]

What kind of silencer is that and where can I get one?

[@robduddridge8052]

@@jameskohlenberg5063 any standard1/2 thread silencer will do I can't remember the brand name it was only £40

[@bobatherton1799]

Another great job!

[@BalearicBeatnik]

my .22 Nemesis started venting CO2 after a few mags, and its back at the shop. Andy mentions this happened to him in the intro to this video. Does anyone else have this experience and do they usually repair or replace? The pistol itself seems to be fairly solidly made/not field strippable. Thanks all. Great channel too, very helpful for a beginner like myself.

[@jesseflynn1259]

I cary 2 . Great selfprotection

[@runerebel8441]

Nice video as always Andy. Looks like a good pistol. I have the old Webley Nemesis. It is a single stroke pnumatic in cal 177. Have a nice weekend and happy shooting my friend. Regards Rune :)

[@runerebel8441]

@Ian Mangham Hi ian. Yes its been a while.

[@runerebel8441]

@Ian Mangham I have sold a hole bunch of airguns, but I still have a few left ;)

[@smallejector5266]

Great video, not for me, but glad to be able to rune (rule 😜) it out. Keep up the great work Andy.

[@billy007rodaway]

It's nice to see you and the rebel doing each other's introductions it'd be nice to see a calibration in the future keep up the great work.

[@joshrevitt8975]

Collaboration

[@billy007rodaway]

@@joshrevitt8975 thanks Josh.

[@rane9096]

Just picked one up in 22 and I absolutely love it, btw, to anyone having trouble with leaking on the main seal, be sure to clear the tube of any debris, mine has worked fine since my cleaning of it and was quite dirty (actual dirt) straight from the factory

[@rane9096]

@Sarah Moul edit: it worked for me for a solid week and then the main seal inside the transfer port also failed, so I took it back for a crosman 2240

[@hedgerowpete]

cheers for the video team, great not to see a glock. great review of the gun and without the harping on about webley history. thanks for the shot count guide from the co2 bottle, a brilliant golden nugget of information that helps a beginner out. loved the intro as well, shows a great sense of humour which is carried over to the video reviews

[@nickunderwood6175]

Hilarious cheers🎉

[@rcchronicles25]

Great review. Really enjoyed that

[@kurtj.9656]

Oopss...! Mr Rune is in the UK..... (!?) Ha ha aaa Interesting gun, never seen one before. Thanks for the review

[@simonbean1264]

CP2 beats this hands down ! Just under 6 ft/lb in .22 as a pistol with the rifle barrel and stock thrown in for just over 9 ft/lb ... oh and a very effective silencer. I should add a very good review as always , it's just that this pistol is seriously underpowered for the sector it's aimed at which is a shame as the design is very good.

[@duskom6737]

Dobar video.

[@freakydeke1]

would rather have a crosman at least it produces legal limit power and its easy to customise

[@bigronvfr750]

Hi david which one would you recommend

[@ianpearce78]

Love the silencer, where from and price please.

[@johnrambo1349]

They should make a pcp version of this gun. I would buy it.

[@HLGJnr]

There's only one Webley Nemesis which was a single stroke pneumatic made between 1995 and 2005 and made in Birmingham. This is a cheap Turkish made plinker.

[@zmutakin1872]

Yes

[@DreamsCatcher101]

You know your getting big on youtube when you go outside and someone tries taking you out.

[@daveellis351]

How about reviewing the Zoraki hp 01, keep up the good work

[@spyder2114]

What I meant was my CO 2 cartridge Is stuck in the chamber? Any tips on how to remove it before I take it apart or take a drill to it?

[@jeffprice1557]

Hi are you going to review the new webley nemesis x air rifle thanks

[@C210288A]

Why you don't say: each time you change the co2 cartridge, you have to unscrew the silencer

[@jesseflynn1259]

I love it because I am ambidextrous

[@jimsinnovations2737]

what kind of pistol can i get similar that is semi auto, and don't need bolt reloading, or break bearl to reload i just bought this one and waiting on it to come, i like it from what i've seen

[@spyder2114]

Hey can you help me out my suite 2 is jammed in the seal 2 chamber how do you remove it?? Thanks for any info. Salvador

[@kostasgold]

Great but I would like to see it in 22

[@jonnymak1079]

What if you deisal the pellets???

[@MrJames19676]

Hi Andy, will you be having the new review on the Umarex SA10 soon?

[@alterbit1034]

Any review of the Nemesis X in .22 please Andy?

[@reymorado2980]

What silencer are you using?

[@alterbit1034]

Any chance of review/comparison with the Nemesis X please Andy?

[@AAROnair]

I have one on test at the moment. Watch this space 😉👍

[@alterbit1034]

Thankee sir, 'specially for the speedy reply! 😎

[@krisgater6891]

Another good review...Will you be reviewing the nemises x rifle?

[@SodergrenWoodWorking]

Great video! Can you do a review on the beretta mod 84?

[@georgeaura]

Any link to the suppressor?

[@andyburns6496]

I liked the look of this one. It seemed to include everything I wanted: multi-shot magazine, power, silencer thread, rails etc. However it suffers the same inherent defect of many CO2 pistols, once it goes wrong it’s just an expensive ornament. You can’t strip it down, parts aren’t available and the manufacturer won’t have a service department that can repair the gun at a reasonable price and time. The longevity of Andy’s .22 illustrates the problem. Yes you can swap it for a new one when under guarantee but it going to be a hassle at best. After the warranty period in the bin it goes. I’ll keep to my SMK-CP’s and Crosman 2240 which can be totally stripped down and have valve assemblies and seals that can be replaced. Shame ............

[@AAROnair]

Thank you. I am trying to generate more of a channel community with the guys I know, and I hope to add more guys to the friendly spirit, hopefully guys from channels you know. Thanks for your support and thanks for watching.

[@PBazBarrett]

Did you mention the trigger on it? or did I miss it..

[@ppeppe]

@2:14

[@arranc6870]

Hi there, Wondering if you could help me, I have a problem with my nemesis, When I pull the bolt back it gets stuck and it won't go forward, it gets stuck in the back position but when I pull the trigger the bolt slams forward Any help would be much appreciated

[@murfspop]

What moderator did you have ?

[@davidmg1925]

Review with the silencer on?

[@Congey2012]

Hi there, great video! Do you have the details of the silencer shown in the video, please?

[@ppeppe]

Daystate carbon fibre

[@BloodnGutz43]

Hi Andy ,I’ve been wondering is it possible tp Swap a barrel in a BSA .177 r10/s10 to a 0.22 cal one by just changing the barrel bolt and magazine, have been looking for weeks on internet to see if theres anything about this but no luck , so thought id ask a professional you, who can chat to Drapers Gunsmith to see if its a feasible idea. ?

[@christophervilliers8395]

Most if not all webly air guns are produce in Turkey these days.

[@jesseflynn1259]

I must replace o runs once a week .

[@nikkihayes5411]

How? I guess you meant 'o' ring seals....cant find a vid or diagram o explain how its done

[@raulotsus4673]

Hey. Have a Mr Rune new channel?

[@sindento1942]

Like most pistols in this price range with self indexing magazines they're pretty poor, bordering on useless. I've tried many different pellets, all with the same result.Invarablty I get regular blockages necessitating having to remove the barrel to clear the pellet . Even when working I can't see the point with a plinker like this, you can load and shoot the same number of pellets as the mag holds quicker with the single tray and no danger of a stuck pellet.

[@justintime1218]

Not for me... Not even full powered.. so a bit pointless really.. atleast Crossman made a legal limit pistol.. Also Webley is No longer made in the UK..

[@markhomer7628]

£129 ..it's a steal ... ( Bargain at the NEC maybe ) ...

[@aidans4866]

Get to it...

[@Simon-rx7sv]

I am looking at this for pest control rats I suspect its a bit under powered, I want a small pistol/gun with silencer and sights and no stock it needs to be hand held not shoulder fitting

[@CervezasObsonMex]

where can i buy the silencer

[@SanalliteSapling]

wait? who was that guy?

[@steffen36260]

Rune Rebel

[@iqbalshaikh3378]

Price plz

[@camkid7564]

Where did you get that suppressor

[@AAROnair]

It is a Daystate carbon fibre silencer.

[@senatorjosephmccarthy2720]

Ya, I'm getting disgusted with so many air guns, rifles and pistols, seals failing within a few hundred rounds. And I'm applying the Pelgun oil at least enough. There's no industry like the air gun one for selling tons of junk sealing.

[@lfcmarkeb7124]

don't get why a 3rd of the UK limit of 6ft-lb is acceptable for a pistol, would we accept air rifles putting it 4ft-lb?

[@PeterAgostiniJdcap26]

Shooting in cold weather not a good idea for co2 seals .

[@peter62384]

at aprox 4.53 on your video you give the indication that you unscrew the bolt from the side to change for left handed shooting. please no one follow this advice as you could break your gun, it does not unscrew from the side, you have to cock it and unscrew bolt from the back of the gun to release it

[@jan-hg9vi]

Every ad and every one of these that is for sale on the net is advertised as .22 but the pictured weapon is marked .177. Do they make a .22

[@angelsdevils2956]

Can easily kill a sasquatch with this gun !!

[@alexandersupertramp7395]

Great review as always Andy, unfortunately it's the elephant man of pistols, hideous!! Awful hybrid looking pistol, too big, non blowbk, and the design is by Danny aged 8. Great to see different designs in pistols but this one in my opinion should a been in the bin😀

[@justintime1218]

Webley Alecto is better

[@zmutakin1872]

Berapa harga nya master

[@rayfogwill2774]

Mine never lasted a whole tin of pellets rubbish, don't waste your money on it.

[@nothin6121]

No....just no

[@amrhalawa1316]

how do you know each other 😂😂

[@AAROnair]

We try to work together from time to time trying to help make the Airgun reviews more of a friendly community. Rune and I do things slightly different in our reviews, but we complement each other very well, and he is a really nice genuine guy, a friend to me and AAR Onair. Thank you for watching.

[@supervortex8363]

its awful