Weedo X40 IDEX 3D Printer - Assembly Leveling & Print

Checking out the Weedo X40 IDEX 3d printer which uses an independent dual extruder.
Buy X40 here: geni.us/iAoN
IDEX Printers: geni.us/KAlfF
Recommended: geni.us/JustVlads
WEEDO X40V2 3D Printer Independent Dual Extruder, Firmware Open Source, Auto-Leveling, 4.3'' Touch Screen, Support PVA TPU ABS PLA Nylon, 11.8"x11.8"x15.7"
WEEDO X40 designed with independent dual extruders on the linear rail, with the dual extrusion, duplication and mirror mode printing, it’s super-efficient if you run a 3d printing farm.
WEEDO IDEX X40 is designed with proximity sensor to improve the overall printing reliability. We have also added essential quality of life features such as print resume after power loss and auto power off to save energy.
WEEDO X40 adopts a 4.3-inch full-color touch screen.The user-friendly UI is equipped with a multi-language interface. Can’t remember what you named your .gcode? Don’t worry! The graphical print interface displays a preview picture and details for each model, making it easy to identify your sliced file from Wiibuilder.
WEEDO X40 equipped with ESP32 Wi-Fi chip and a built-in camera module that allows you to check your printer in the local area network. You can also start prints over the network with CURA and our Wiibuilder slicer integrations.When X40 connect to our control App: PoloPrint Pro,you’ll be able to receive notifications from your social account when prints are complete.
My main channel @Just Vlad
As an Amazon Associate I earn from qualifying purchases

[@Just_Print]

Buy X40 here: geni.us/iAoN IDEX Printers: geni.us/KAlfF Recommended: geni.us/JustVlads

[@butfirstcoffee1175]

at 13:44 You mentioned it crashing into the top of the gantry. This is not unheard of, and some 3D printers will use that to align the Z Axis by crashing them both into the top.

[@guythejedi]

When it goes all the way up it is leveling out the gantry. You need to let it go up

[@iangrice5511]

Where do they get these names for printers from 🤣

[@Lurker1222]

I'm convinced they use an auto word generator and say "screw it, WEEDO!!!!!!!"

[@iangrice5511]

@@Lurker1222 🤣