Weighing my FULLY stripped volvo 740 drift car then taking it for a test drift!

In this video we head to the scale to see how much weight i stripped out from my NA 740 drift car. Then we take it for a test rip at the classic spot.
GET YOUR BRICK DRIFT BEER MERCH HERE!www.driftsnlif... RACING TECH HYDR0 EBRAKE 10% off using code "driftsnlifts": fischracingtec... HASTE PERFORMANCE: www.post-haste.... TURBO SERVICES: totalturbo.ca/... SOCIETY LOUVERS: redblocksociet... DRIVEN DIESEL WEBSITE powerdrivendie... DIESEL WEBSITE USA: us.bddiesel.com/ CANADA: ca.bddiesel.co... shifter: www.speedingpa...
message @fraz_ali_khan on instagram for zf to b230 welding

[@chris-gh4cd]

It’s crazy how hard it is to find a 740 these days

[@Craycola]

I know it's kinda sad, almost the end of an era

[@Boykot1]

Hard to see why :D

[@TurboWorld]

@@Boykot1 ayeeeee lol

[@kw2519]

I seems easy to find automatics

[@steveycapri]

I bought my extremely clean 940t wagon for $350 maybe 3 years ago and ended up putting it on 100 spokes and hydraulics for fun, technically totalling it in the process because it was worthless. Now if you find them they're going for $3500 to $8000.

[@devonswindell9735]

The way you initiate is so... Quick and confident, your transitions are so clean and the way you end each drift, buttery smooth. Very inspiring. Good job.

[@10mm]

No matter how extreme you want to get, the louvres stay. It's mandatory

[@driftsnlifts]

Definately

[@isaks3243]

yep, that is roughly what my 940 weighed before I sold it mine was 1180kg with me in the drivers seat, and I used to weigh 70kg at that time and that was with a full tank of fuel. but i ran a carbon hood, plastic rear doors, plastic trunk, plastic fenders, titanium exhaust that I built myself etc. working as a pipe welder with an x-ray certificate in tig really have perks because I could fabricate whatever I happened to need. I also have a lathe and a mill at my job that I can use as much as I want which helped too when it came to fabricating parts that I needed which greatly reduced cost

[@justanothertuner4135]

I had a 740! Paid $390! Loved it and miss it! Love the fact that you all are keeping these Volvos alive!

[@ryanreish8160]

They key to avoiding the cops is to proactively call them and say that people are drifting on the opposite side of town that you are actually drifting at

[@NordCarolina]

Now it needs something crazy like a CF trunk or fenders

[@misterLukeG]

With NA you wanna use less E brake and more inertia to keep your speed up

[@030yk]

Just bought a beautiful Volvo 740 Turbo wagon, been wanting one for so long and the day finally came! :) Next step for me is to get an LSD and coilovers

[@davidblass2660]

you should do a 16v swap with a B234f for the NA build! I just bought a 940 Wagon with the B234f an M46 trans and G80 in the rear axle. It's awesome :D Its sadly an interference engine but 155hp NA is a lot of fun

[@driftsnlifts]

I have a fully built 531 head with big valves and a crazy cam and a 2.5 stroker crank sitting here. Just need the rods and pistons and i can start assembling. Should make anywhere from 220whp to 250whp and rev to 8500

[@davidblass2660]

@@driftsnlifts That is so sick, cant wait for the video!

[@weedeatermachanics13]

You amaze me and inspire me more and more as time goes on I love the high rpm na builds I hope this one turns out rippin like miss huff did

[@stusymes2566]

Probably would have had the wagon if you did the mudflap delete, that’s a good 10-12 grams each side!

[@driftsnlifts]

Ooo good idea frame weighted warrior

[@themizeguyscustoms]

Super Rad bro! I'm currently building an 87 760 Turbo I have a 940 that I drive daily but it's a non- Turbo. Keep up the good work oh, and your shit hits bro. Love it!

[@seanhenderson2079]

Throw a couple more resonators on it. Straight through flow fx help a lot. My old 302 was straight piped , I hated it , put two on either side after the xpipe and it changed the entire tone.

[@swed_sled]

its the coolest car youve built

[@florian_montuzet]

This car with 220 whp gonna be crazy fun.

[@leviridgeway5873]

I’d honestly love to see you drift a crown vic that’s fully gutted and has a welded diff😂

[@ieuanb8378]

The black bonnet with the louver non colour coded bumpers n trim looks so good 🤙

[@feminazislayer]

I'm impressed with how violent she snaps back n forth for a long wheel base boat. The wagon even with all the power still wasn't as quick in transfers. 12lbs boost with all the goodies is all you need to complete

[@SKOMPAS]

Yeo Colton I’m hopefully buying a 740 from an old man this week, we have agreed a price, I’m in Ireland so it’s a RHD 740 saloon, 2.3 N/A and manual it was crazy cheap, only has 150k miles and underneath it is almost 100% rust free! Can’t wait to mob about in an old Volvo I just have to try and stop myself from cutting the springs and welding the diff

[@s2e130]

Loving the look of this sled man, got a look of Goldie about it loving the rear window louvers man, gives it a great look one car I've never owned is a Volvo, the more I watch you bro the more I want a Volvo 🤣🤞🏿💯

[@tonyiuga4288]

gold voe plus the classic drift spot, i felt like i was watching a Goldie video again but with extra sauce. well played

[@jaythemusicman801]

I had a carbed 242 straight piped for a bit, decided it was too loud threw a cherry bomb on it, loved it

[@feminazislayer]

@9:58 yo my heart stopped...you came inches from nose planting it into the wall and then almost ass tapped it too. Geze make her last

[@FlankyFrankie]

My mom had one of these... they handle surprisingly well when stock.

[@MathiasLaakkonen]

man it's been a minute since I watched your videos, good to see that you're still drifting at the same spot

[@texastwostroke9638]

Please think about running door bars.

[@Z4G.]

Hellu sir, will you be going to AdamLZs drift meet in Ontario? I bet everyone here would love for you to pour sweet Volvo gravy on all the JDMs that will show up.

[@rhubarbpie2027]

THE GRAVY BOAT COMETH

[@SevenFortyMotorsports]

Heckin eh, I like the black bumper and hood together

[@ZafiraSteve]

Lucky you guys have super wide roads

[@1jzboi]

drifts n lifts showing the boys once again you don't have to have a stupid powerful car to drift and have fun

[@robertpeters1497]

love your ride!! cant wait for tthe next event and come talk about drifting with some of the other bmw owners as well!! my little 2001, 320i e46

[@saltvatten]

Great work! FE Media has a kevlar 740. I don't know the weight of it though

[@Stale_Mahoney]

can remove another 6~8kg or so with a lightened flywheel and, aluminum underdrive pulley on the front of the crank moves a good 2kg i think, and makes the engine feel allot nippier, got it a 4.6kg flywheel instead of the factory 12~13kg or so and alu under pulleys and it feels fantastic. been driving a few years with it

[@ToreDL87]

Aluminum main pulleys without harmonic rubber on them breaks crank keyways, he's tried it in the past so now he steers clear, racing pulleys with harmonic rubber cost a lot more. With N/A you actually wanna hold on to the torque you get from rotational mass, because if RPM's dip too much it's harder to get them back with a snappy throttle response, otherwise you're stuck kicking the clutch. IMO it's better to retain the factory main pulley & flywheel even if it means the loss of some throttle response.

[@Stale_Mahoney]

@@ToreDL87 well a simple fix is to buy the upgraded steel keyway and timing gear for the crank, daily driven mine and it gets abuse, the older redblock's did not have harmonic balancers and did fine, but if he is making a spicy NA engine it should not be a problem and with how light his car is, also the alu pulley is alot smaller so it drives the water pump slower to not cause cavitation in the water pump if you gonna live at high rpm's and free's up HP.

[@ToreDL87]

@@Stale_Mahoney Didnt know about the early redblock main pulleys, but he has still had issues with alloy mains, I think he said (its been a while now) the crank keyway hole itself broke, i.e damaging the actual crank as well. The waterpump rpm makes sense, but for that you can just get a bigger waterpump pulley.

[@Stale_Mahoney]

@@ToreDL87 to be fair even with the stock pulleys the keyways can snap on the stock cast belt gear as it is a weak design from the get go, and especially when reving out or abusing the car at the limiter. personally i have herd as many stories as the stock braking as the few that has had issues with the alu pulley, the upgraded gear and keyway is the superior path even if sticking with the standard pulley

[@ToreDL87]

@@Stale_Mahoney Fair enough, I bow out ^^

[@gedas3419]

What would you think about k swapping a volvo?

[@ToniBabelony]

Damn, that weight. That:s almost the same as our kei car!

[@s7Switch]

you should lay some lightweight carpet in the floor to muffle the sound

[@goobworx]

love the sound of that thing sheesh

[@gemizu4874]

lol it weighs less than a miata, and its almost as light as my car 950kg, great driving mate stay safe

[@DakotaB90]

Full NA build!! Going to be so sick

[@kar-low]

what a life youre living! sick drifts and sick shots. have you considered getting a clip on mic? it could help your viewers having it easier to understand you. :) btw, what area is that with the mountains? i would estimate somewhere in the usa, but nothing closer :D

[@williamgreer4087]

It's Indonesia 😂

[@kar-low]

@@williamgreer4087 no way dude! do you know the name of the mountain? looks really cool place to travel to

[@theglowingnugget7999]

Phil Collins intro 🎉

[@st3rk447]

have you ever owned a volvo with carbs? would be cool if you had a tuned carb volvo:)

[@timvanderpeet46]

Plexi the sunroof? nice job❤

[@NieJestemzPolskiPL]

This is freaking amazing!

[@jfv65]

1080kg is pretty dang good already. glass is so frickin heavy. Many 700/900 cars have weights inside the frame rails , behind the bumper struts. easily 1 kg each. You got those out? Then there is the weight which is sometimes mounted onto the firewall somewhere in the middle. Another 4-500grams. Maybe you ca also ditch the bumpers and just mount the bumper covers? Another few kg's 1050kg should be possible i think.

[@driftsnlifts]

Yep frame weights and firewall weight are part of stage 1 reduction. I took the rear bumper off and am running just the skin and i have considered doing the front.. But it may be good to have for people spinning out infront of me tandem drifting

[@evanreid5678]

Sick car man. whens the calgary video coming out though?

[@gafrers]

Very nice 👍👍

[@pette8065]

in sweden younger people would kill for that car lol

[@TrevorStruthers]

I should take out the passenger seat too. Would save me about 300 lbs in girlfriend weight if I didnt have one. Cheers.

[@jhmonti007]

driver pov drifts were awesome

[@TurboWorld]

Car color looks like sand, looks like glorious fun to drive, "Sand Box"?

[@feminazislayer]

The luvers and spoiler is another 20 lbs

[@KABOBkabob]

nooo the blue interior :(

[@Chris75479]

I need to know the NA drifts n lifts recipe!

[@gedas3419]

Light weight chassis would fit an itb MissHuffs engine

[@fredrikh1873]

Where can you buy dash covers for these cars? Looking for one that fits the 940 dashboard

[@mateusz670]

hi what are your tires and rims parameters, and your friend's sedan 940 rims and tires parameters? some spacers assembled? thanks in advance

[@Late9488]

if it has 120 hp i assume the motor isnt tuned? Or have you done something to it?

[@slo_derbi]

What rims is it the blue 940 has in the rear? And from what car is it?

[@mspriensma]

Hello sir, what's that piece on top of your dash? Did you make that carpet yourself or can it be bought somewhere?

[@keyboardwarrior9199]

BEST INTRO ON KZbin

[@ruchmann]

You can safe more weight putting out the rear wing and the rear black piece xD

[@frujka123]

Man my Volvo is the same exact color lol gle. Though I was wondering, in Canada, I’m assuming you guys have the bendy tube that sucks hot air from the manifold to warm up the map stuff. Do you automatically rip them off when you see them? I know they’ve been known to have the flap stick open and fry a bunch of stuff. Been a fan for a long time and love your fucking videos man, never stop posting

[@driftsnlifts]

The bendy hot tube gets ripped out the moment i get a new volvo home. Thanks for watching bro

[@frujka123]

@@driftsnlifts 👍 I would bin mine but cali needs them for smog inspection lol

[@mbrancea4711]

You guys use stock diffs? LSD or welded? Those drifts seems so effortless 👌

[@driftsnlifts]

Welded all day

[@no-replies]

Taking it to the scale at a scrap yard. Fuckin classic

[@Tumbbi]

im planing make trip to canada because its guite close a what we do in here in. close to northpole. if not you but can you recommend some volvo enthusiast cheers for FINLAND

[@Tumbbi]

tai joku suomalainen tähän vastaa kummiski niin missä on volvo ukot

[@tonninseteli855]

@@Tumbbi ei Suomessa oikeen kukaan osaa ajaa näillä

[@earlturner6023]

hutsut imee munani vittu

[@erikelverstig4747]

This is legit The swedish ae86

[@bobdylan3510]

you should cover your plates just in case the Indonesian authorities alert the B.C cops

[@jamesnash1180]

No turbo cool

[@RamenPoweredShitFactory]

I'd do this if I had an old volvo

[@rilagin1]

What mounts did you use for your racing seat?

[@KABOBkabob]

How do you not rub in the rear? I'm on cut springs with fully hammered fenders and still rub when I drift. Hoping maybe bc coils up front will help by reducing bodyroll but yeah how do you do it?

[@anthonykaus3428]

cut springs are too soft, get a stiffer spring or coils

[@KABOBkabob]

@@anthonykaus3428 drifts n lifts and a lot of other folks say bc rears are too stiff and they run stock rear. I could throw ipds/bilsteins or bc's back there was just wondering how tf this dude runs as much poke as he does on chopped springs

[@earlturner6023]

maybe stiffer anti-sway bars

[@jaimiestroomer1107]

My r34 is like 3400 lbs. I’ll have no chance at grassroots against ya lol

[@rpenrose24]

Koots or Nagan?

[@manameroboman8694]

how mutch for you to send me a pair of usa headlights?

[@robing7983]

You look cool in your long hair and beard.

[@ppnomula]

Where are the mudflaps from? They look sick

[@KABOBkabob]

factory option

[@Flor-sy4qr]

Hi, is it worth trying to assemble the first drift car from Volvo, or just don't worry and take a bmw e36

[@tuk2433]

Won't be long before this Volvo gets clapped. What 🚫 to do if you have a 740 survivor.

[@vegardnilsen9708]

I dont understand how you can drift like that with 120hp... Plastic tires?

[@theregoesmiller389]

1080 KG = 2380 LBS

[@daniellundgren2018]

Buy a volvo 360 ut wights 940kg orginal

[@evanreid5678]

too bad they never sold them here

[@MrKveite1]

Could use some more power....

[@cody_mize3221]

come get my 960 wagon, it's just sitting :(

[@driftsnlifts]

Location

[@cody_mize3221]

@@driftsnlifts North GA

[@Mile-long-list]

Volvo. Boxy but good

[@volvo965]

Pls don't Kill it pls

[@Dasiikopath]

Cut out the spare tire well, and plate over it

[@antoniociampo7698]

👏👉💯👉👏💯

[@zhuravkoff]

Настоятельно рекомендую не гонять без каркаса. За видео Диз👎

[@bobsagit10]

Patiently excitedly waiting for the gravy coated drifts n lifts knuckles

[@jpc3874]

saw some old lady driving a mint condition one the other day

[@MegaRetr]

Now it needs something crazy like a CF trunk or fenders