Avoiding Happy Little Accidents | Metal Miter Cuts Made Easy

[@johngaskey218]

Full on Bob Ross level welding!

[@lucascaros5298]

This comment makes much more sense after watching

[@jeffgenchi5863]

Such a soothing video. I was at peace. Thank you. Lol

[@dingoeatswolf3663]

Man!, I feel soooo relaxed watching this episode this morning sipping my tea. The music compliments beautifully 👍. More please 😂

[@Welddotcom]

Glad you enjoyed it!

[@austinhargett5792]

Thanks for watching !

[@dingoeatswolf3663]

@@Welddotcom must add, I did make some frames this last week (that I welded galv wire mesh to) and I didn’t bother to check the mitre angle (going off those silly little marks the manufacturer puts on their saws…mistake) and welded it up on the ground (painful and cursing by the end) , not to mention stuffing up some welds being uncomfortable and out of position and getting blow through on some spots (more cursing and rework). I don’t weld often so good lessons for the next job and a good laugh watching your video after my experience.

[@leongrows3352]

It's almost painfully stress free but informative lol

[@austinhargett5792]

😂😂😂 then I nailed it

[@philip1091]

Gee thanks Mr Rodgers. That was swell!

[@callamthompson6609]

This is actually fantastic

[@EJOrtizWelder]

Good stuff bro.

[@fmbjmf]

Smiled my way through the whole video, fun and informative.😁

[@oxygenium92]

Ok. I really dig this style of a vid. So relaxing and chill and yet very informarive.

[@mr.a.williams9951]

Hilarious, but still educational. Good job!

[@lloydcastleton]

Lmao bro went "this old house" on the haters 😂 Add- and bob ross with some woodright shop mixed in there 😂😂

[@austinhargett5792]

Haha 😂 I am usually pretty out there. It was chill to reel it back. Honestly good advice 😅

[@Welddotcom]

Gotta give the people what they want right?

[@kevintaylor113]

If Mr. Rodgers were a welder in the neighborhood instead? 😂 Great video brother 👍🏼

[@matolittleelkwells5377]

Great sculpture I definitely wasn't expecting to see a piece of art this is why I watch these videos outstanding

[@Welddotcom]

Thank you very much!

[@gavendb]

when building frames that had to stay in plane we would use 3 pieces of angle to put under the corners to isolate it from the floor. normally once it's tacked together it can be finished welded on floor.

[@silencedogood1973]

Informative, entertaining… but freaking hilarious. Kept me watching and laughing out loud to the end. Nicely done sir. 👍🏼

[@Hypnox78]

I'm totally getting a vibe of Mr. Rogers's neighborhood in your voice.

[@geddstock]

Leave the point alone it makes it easier to tack together,then just brush your grinder down the joint it takes about 10 secs for all four corners

[@Key_Capz_]

gotta love that catty wampus dog😂

[@austinhargett5792]

😂

[@derekbryant6137]

I love the Bob Ross level of satire you've got going on here however the information is on point

[@bob84409]

This is amazing, more please!

[@se7002t]

This guy is a legend 😂

[@nolanfrank582]

"Silly little jack stand" lmao almost fell out of my chair.

[@austinhargett5792]

😂😂

[@nolanfrank582]

@@austinhargett5792 love the videos Austin. You're killin' it man!

[@austinhargett5792]

Thanks my dude

[@lights80088]

Thank you Bob Ross, lol. Tired of abrasive saws for obvious reasons and power hacksaws that the blade nearly always wonders, I purchased a cold saw and never looked back. Cold saw makes such a beautiful cut. Use them properly and the blade will last a long time.

[@RussW.]

The Joy of Welding??? Lmao...I was dying to see you lose the hat so I could see the Bob Ross fro underneath. Great video. Thx for the laugh and posting!

[@johnashcraft2724]

Educational AND entertaining! Great!!

[@mememe5231]

Best welding video ever!!😂🤣

[@ifell3]

Can't believe you continued through the whole video. I was expecting some heavy metal to cut in 😅

[@austinhargett5792]

I lost touch towards the end haha but I tried

[@Welddotcom]

Dedication to the craft 😄

[@wargamingsupernoob]

The only thing you missed when tacking the frame together was puling your corner to corner square with the tape measure. If an inspector came by, you could easily fail on some jobs. I learned that the hard way.

[@Ευτυχια-ν7ζ]

What a sweet talking boy Austin is 😂😂🤣 . Greetings from Greece.

[@Welddotcom]

He sure is! Maybe we can make our way over there some day to do some welding!

[@ich1ban916]

Bob Ross would be proud!

[@austinhargett5792]

An honor 🔥

[@ich1ban916]

Absolutely!, Beautiful welds BTW@@austinhargett5792

[@Jackmanis]

Excellent video. I have a project building a gate and I've always had slight issues with my 45s and this really helped me a lot. Thanks buddy!

[@bryanst.martin7134]

Welcome back Mr Rogers... Didn't you forget to change your shoes? I know you did... ;-)

[@bork9882]

this is amazing. 😂

[@treyrags]

Nicely done. Unless the application calls for it I do not like to grind the welds down. They are eye pleasing to me and I would rather see them

[@stephk5255]

Funny and informative! What's your best guess that caused it to not be flat? The sequence was good.

[@austinhargett5792]

No clamps 😅😂

[@bryanst.martin7134]

I tend to use a vicegrip clamp to make a ground connection. Works good, no clean up. As I do a lot of aluminum which is exposed after finishing, it saves time.

[@Welddotcom]

Great advice gotta try that

[@melgross]

I just ordered one from Stronghand. Very nice and very expensive.

[@davidaud5459]

Lmfao…you nailed it! Bob Ross meets Mr. Rogers.

[@johnyork2366]

😂😜😜🤣🤣🤣🤣🤣 omfg!!! Lmao smh.... excellent way to react Austin! Btw-i really hope the next episode is in-your-face Loud As HELL!!! 🤪😁😈😈🤘🤘🤘🤣🤣🤣

[@JamesJones-ny5eq]

Next time use your first 90 as a template and clamp parts to it. Gets you a bit higher of the ground as well.loved the Bob Ross vibe. Great video. Keep them flowing.

[@traviswalker6831]

I was so relaxed I pooped my pants! I didn’t care though because I was relaxed.

[@Rahatlakhoom]

Are you watching this Gen X? Skilled trades-Good.

[@tubeonline629]

I got tired of welding on the floor, so now I wrap a chain around my ankle and with the help of my chain hoist, raise myself up and weld underhead.. You may need a chin strap on your welding hood.

[@Welddotcom]

Welding on the floor is not fun for long! But that is a whole new level.

[@rossrc]

love the video. But one question, why tack the scrap onto the piece for the ground clamp? Why not clamp the scrap piece to the base, then clamp? No clean up, blending or unnecessary heat input. Would the clamped connection not be as strong of a ground connection?

[@AustinHargett]

clamp didnt open that wide

[@rossrc]

@@AustinHargett definitely a valid reason! haha

[@cab8188]

Somebody's been watching to many Mr. Rodger's reruns !

[@BruceLyeg]

This reminded me of the time the vet put my cat on quaaludes because he was "stressed"

[@Dibulok]

HAHAHAHA, this is AWESOME! Thanks!

[@Welddotcom]

You bet!

[@Dibulok]

@@Welddotcom welcome down to my shop floor! Hahaha. More of this humor please 😂

[@1mw4tch1ng]

i would check the 45 deg angle against the blade which will be accurate and not on the edge of the base table.

[@royeasom432]

If you follow the process of mirroring correctly, you won't end up with a twisted frame and out of square frame. Also, that frame is going to grow, and all enclosed frames need to be reduced by material thickness. This helps ensure that you 20"x20" is actually 20"x20"

[@Welddotcom]

That is great advice!

[@Fireball2ool]

I bet it was killing ya not using the fixture table. It really is difficult to get something flat without a reference surface.

[@rockstar34960]

Even a cheap 100 dollars fixture table is better then the floor

[@austinhargett5792]

Yes it was! But that’s where I started was on the floor. That was who this video was for 😅

[@Daltond204]

Everytime I watch this ding dong it makes me realize how much I miss Bob moffatt on this channel…

[@austinhargett5792]

What do you wanna see? This ding dong just wants to help

[@welderdude1]

Bob Ross would be proud. 😂😂😂

[@TheReynMan77]

Not sure is I trust this no stress Austin, little sketchy 🤣🤣

[@dominicalbrecht7039]

Someone get this dude some uppers.

[@KZ-yy9pm]

go bonkers and check the blade to the back stop then you 100% know its a square cut.

[@nicolasstanley1392]

This is pretty hilarious, eh?

[@nelsonglass6]

I like the old you

[@erikslagter3231]

WIGGLE WIGGLE 🎶

[@darenscott1718]

Where is Bob Moffit?

[@melgross]

He’s shilling for Everlast.

[@michaelrougier2768]

Please you sound like some of those tv cooks

[@Julianna-Just]

This is pure gold. You seem like just the kind of asshole I would be friends with 😂

[@mikev.1034]

👍🤙🤘✊

[@johnrutherford9454]

Bro 😂😂

[@austinburtch5972]

I'm not attracted to other men but I was about 83% chubbed watching

[@geddstock]

You have a bench and you’re working on the floor? Wtf Little tip..measure corner to corner to check squareness before you put the opposite tacks on.

[@ifell3]

😅😅😅😅

[@austinhargett5792]

😂😂

[@yesdeere1376]

😂😂😂😂👍🏻

[@Flygio]

I said butt

[@johnpope4464]

Bob you are not 😂😅

[@geddstock]

Just buy a saw where the blade swivels,this is torture…

[@nde-mt2yc]

A gay welder dude, Ohhhhh Noooo...

[@christiansimony2634]

Sad that an otherwise great and informative channel is turning into a, poorly performed, clown show 😢

[@Kevin-is-here]

I miss Bob😢

[@austinhargett5792]

Seems as others enjoyed the “show” and see that good information is provided at the same time. Maybe it’s not your taste. 🤷🏻‍♂️ I’m sticking my neck out twice a week to teach the masses. No I’m not bob, but my mission is the same. I’m not dry, or laid back. That’s just who I am.

[@christiansimony2634]

@@austinhargett5792 humor and personal touch is fine, in moderate doses ... but overdoing it just ruins the content. This episode fx is super relevant, but simply too "clowny" to watch to the end. But, you're of course right, when you provide the content, you are free to do what you want to the channel, regardless of feedback.

[@christiansimony2634]

@@Kevin-is-here metoo ... and redbeard, who has a MUCH more balanced content to "personality"/"fun" ratio

[@MarvUSA]

I suppose you think your funny.