Welding VS Lapping VS Coupling | Which is the best method for joining Rebar ? | Coupler Advantages

#welding vs #lapping vs #coupling
#rebarcoupler #rebarsplicingsolution #advantagesofcoupler #advantages
#rebar #splicing #machine #solution #construction #equipment
Rebar Coupler is used when long length of TMT Bar required.
Now a days Rebar Coupler is a best alternative method of Lapping and Welding system.
There are Different types of rebar is used
1. Threaded Rebar Coupler
2. Roll Thread Rebar Coupler
3. Cold Forged Rebar Coupler
4. Non-Threaded Rebar Coupler
5. Crimping Rebar Coupler
6. MBT Rebar Coupler
The primary work of this coupler in reinforcement is to join two TMT bars for continuous reinforcement. The rebar coupler is used in all the construction fields, such as, constructions of buildings, bridges, dams, towers, etc.
Rebar couplers are used in the RCC structures to replace the system of lapping and welding in reinforcement. When there is need of long length bars or when joining the additional bars to the end of existing bars, the lapping system is applied that is the bars are tied by wire next to each over. In the same way like lapping, welding is also processed where unlike tied by wire, the bars are attached by welding.
Since, there is a wastage of bar in lapping system and welding system, an alternative system is used known as rebar coupler or the coupler in reinforcement that provides an end to end connection for the continuous reinforcement of a structure. The coupler in reinforcement is used since it is economical and cost efficient unlike the lapping system, where some part of the bar is wasted due to lapping.
To Buy Any Construction Related Material & For Threading, Forging Job Work
📞 Contact :- 7021994264
📧 Email :- [e-mail]
🌐 Visit :- trpmachines.com/
**Follow Us On Facebook Page**
/ trpmachinesandtoolsoff...
**Follow Us On Instagram Page**
/ trpmachinesandtools
**Follow Us On Twitter**
/ trp_machines
**Connect With Us On Linkedin**
/ trpmachinesandtools
**Follow Us On Pinterest**
/ trpmachinesandtools
0:05 Introduction
0:19 Types of method used to join Rebar
0:52 Welding
1:50 Types of Welding
1:54 Gas Pressure Welding
2:00 How Gas Pressure Welding Work
2:17 About Gas Burner Ring for Gas Pressure Welding
2:30 How to Weld TMT Bar with Gas Pressure Welding
4:08 Lapping
4:28 Lap Length
4:39 Method to do Lapping
4:58 Claculation of Lap Length
6:19 What to do in Lapping?
7:18 Coupling
7:28 What is Coupler?
8:46 Coupling is the best method to join two TMT Bar
9:10 The End

[@ananonymousguy6551]

What is the per piece cost of 12 mm and 16 mm coupler? and How threading will be done at site?

[@sandeepuniyal6164]

Great bhaii

[@lccygg2023]

Our factory has One-Touch Rebar Coupler seamless steel pipe,

[@Realityowner]

Bhai aap bar bar bolrahe hain ki agar hum metals ko garam kareto uske strength weak hoga bolke ✓ But bhai steel industry me ooo steel rods to garam karkehi banaye honge na 🤔 tab ooo steel weak kyu nahi hue ????🤔

[@TRPMachinesTools]

Heat jab karte hai metal ko toh uski ductility khatam ho jati hai, toh incase agar jyada load aaya toh TMT Bar achanak break ho jayega

[@nirmalkumar2398]

Pagal hai kya mild steel tmt yani saria maim carbon content 0.3percent tak carbon rehta hai wahan welding suitable hai बकलोल

[@ffo2398]

Kindly aid in speaking English or better still it should be subtitle because of non-india. Thanks

[@ArvindKumar-zq4tp]

😂😂😂😂मिश्री हो क्या???