[Hindi/Urdu] Welding Symbols

[@hareshyadav6989]

One of the best technical channel on you tube for welding and ndt we always study from this channel You are great sir

[@WeldingandNDT]

Thank you. Please visit my website www.weldingandndt.com/

[@tejaskumar99]

I'm a fresher Welding Inspector sir, i had confusion about Symbols. But you have explained in such a simple way. Thank you ❤

[@WeldingandNDT]

Thank you. Please join my channel to support my initiative. Joining link: kzbin.info/door/H7nXSievFlbRKzKzEySbkwjoin

[@sheikrahman100]

I am from tamilnadu working in saudi arabia, but i can understand your lecture in hindhi also good keepit up sir

[@WeldingandNDT]

Thank you so much

[@abdulkalamsaiyed4003]

I am Abdul Kalam BE MECHANICAL IN 1993, I HAVE SEEN YOUE ALL VIDEOS, God bless you my dear you explained excellent.

[@WeldingandNDT]

Thank you. Please join my channel to support my initiative. Joining Link: kzbin.info/door/H7nXSievFlbRKzKzEySbkwjoin

[@haiderh3471]

initially i thought sirji's only focus to keep the white board clean but the information shared later was worth waiting for. Good work, please make the next one.

[@WeldingandNDT]

Ha ha ha. Thanks. Please visit my website www.weldingandndt.com

[@AhmadKhan-tb4uv]

Thanksfull sir Aap ke is video se hum logo ko ek experience confidence milta hai

[@rupakbasnet5737]

hats off great explanation, maan gaya sir ji

[@WeldingandNDT]

Thank you. Please join my channel to support me. Joining link: kzbin.info/door/H7nXSievFlbRKzKzEySbkwjoin

[@MaoozFida-pr2fs]

very simple and easy . outstanding sir stay blessed with lots of happiness

[@WeldingandNDT]

Thank you. Please join my channel to support my initiative: kzbin.info/door/H7nXSievFlbRKzKzEySbkwjoin

[@sanjaykumargour9516]

Sir itna acha to iti ke teacher bhi nahi batate .veri good sir

[@WeldingandNDT]

Thank you. Please join my channel to support my initiative. Joining Link:kzbin.info/door/H7nXSievFlbRKzKzEySbkwjoin

[@mdiquebal8507]

Super explanation welding symbol❤

[@WeldingandNDT]

Thank you. Please join my channel to support my initiative. Joining link: kzbin.info/door/H7nXSievFlbRKzKzEySbkwjoin

[@rahulpatil9673]

Nice video sir l am waiting next video

[@WeldingandNDT]

Thank you. Please join my channel to support my initiative. Joining link: kzbin.info/door/H7nXSievFlbRKzKzEySbkwjoin

[@achhelalyadav619]

Well done sir

[@rohitpareek9941]

Dil se bhot acha laga yee lecture

[@WeldingandNDT]

Thank you. Please visit my website www.weldingandndt.com/

[@gyanranjan572]

Very helpful many many thanks for improving our technical knowledge.

[@WeldingandNDT]

Thank you. Please visit my website for notes, videos and other important informations www.weldingandndt.com/

[@mechanicalpower9118]

Love you sir...I always wait Ur upcoming video

[@neyazalam5952]

Zabardast laga sir ,thank u

[@muhammadarslan7294]

Great sir MashaAllah🔥

[@WeldingandNDT]

Thank you. Please join my channel to support my initiative. Joining Link: kzbin.info/door/H7nXSievFlbRKzKzEySbkwjoin

[@atendramanjhi3016]

Plz make next video I m waiting for next part of this video which is really very helpful sir

[@hrishabhmishra8711]

Thank you sir for this knowledge.

[@WeldingandNDT]

Thank you. Please join my channel. Joining Link: kzbin.info/door/H7nXSievFlbRKzKzEySbkwjoin

[@himagiriparasingi8142]

Hai Bro thankyou for provided good videos till now.

[@WeldingandNDT]

Thanks. Please visit my website weldingandndt.com

[@shyamusingh5178]

Your video is very helpful pls make the next part of it,thank u sir

[@ajitmandve3247]

I am trying to watch your video during this quarantine period, really helpful

[@WeldingandNDT]

Thank you. Please visit my website www.weldingandndt.com/

[@basantadas_]

best job sir

[@WeldingandNDT]

Thank you. Please join my channel to support my initiative. Joining link: kzbin.info/door/H7nXSievFlbRKzKzEySbkwjoin

[@Venkataro1986]

Nice explain

[@WeldingandNDT]

Thanks. Please visit my website weldingandndt.com

[@anilkumarnahak7914]

Sir it is very good. Easy to understand. Please make 2nd part .. Soon..

[@WeldingandNDT]

Sure. Please visit my website www.weldingandndt.com

[@prasannabrahma3570]

Thank you so much sir, wonderful

[@WeldingandNDT]

Thank you. Please join my channel. Joining Link: kzbin.info/door/H7nXSievFlbRKzKzEySbkwjoin

[@boashna]

Hello from Houston Texas- I don't speak Urdu but I got the info ..

[@WeldingandNDT]

Thank you so much

[@shivamkrishnatary2663]

Rich information

[@atendramanjhi3016]

This video is very helpful n very easy to understand so I request u Plz sir make a next part of this video as soon as possible

[@inderjeet6517]

You are good teachers to us , thanks sir

[@WeldingandNDT]

Thank you. Please join my channel to support my initiative. Joining Link:kzbin.info/door/H7nXSievFlbRKzKzEySbkwjoin

[@kinavu7523]

Very Useful 👍

[@WeldingandNDT]

Thank you. Please visit my website www.weldingandndt.com/

[@nasruddinansari4577]

Good sir

[@WeldingandNDT]

Thank you. Please join my channel to support my initiative. Joining link: kzbin.info/door/H7nXSievFlbRKzKzEySbkwjoin

[@bharathkona]

Excellent teaching. Thanks mate

[@WeldingandNDT]

Thank you. Please join my channel to support me. Joining Link: kzbin.info/door/H7nXSievFlbRKzKzEySbkwjoin

[@bhairumeena7898]

बहुत सही sir

[@rk6202]

I dont understand aws and iso weld symbol at 12:38 please give your refrence of information

[@GouravKumar-qp3pz]

👍👍👍.. Carry on

[@WeldingandNDT]

Thanks. Please visit my website www.weldingandndt.com

[@dipdigger]

Advanced welding pe video banaye sir ...bahut acha sikhane ko mil rha hai..

[@amit1694]

Jarur banaiya sir....very nice..lacture...

[@WeldingandNDT]

Thanks. Please visit my website www.weldingandndt.com

[@brijeshbhardwaj6957]

Very nice sir

[@rahulkumarsaini236]

very nice sir mai v chahata agal vdo aaye

[@WeldingandNDT]

Thank you. Please join my channel to watch all the videos. Joining Link: kzbin.info/door/H7nXSievFlbRKzKzEySbkwjoin

[@priteshsequeira9784]

Superb sir.. Amazing teaching skills😍

[@WeldingandNDT]

Thank you. Please visit my website www.weldingandndt.com/

[@ajaydev8097]

Very well explained sir, thank you

[@WeldingandNDT]

Thank you. Please visit my website for notes, videos and other important informations www.weldingandndt.com/

[@aslamkhan-sq9by]

Good job sir

[@WeldingandNDT]

Thanks. Please visit my website www.weldingandndt.com

[@vinodkumarakula5991]

Sir, please continue..... 2nd part... Thank you so much ji... I am preparing for interview... I Needed this video 100 percent...

[@karansharma2435]

thanks for the information and i look forward to see more videos on welding

[@WeldingandNDT]

Thanks. Please visit my website weldingandndt.com

[@binaykumaryadav7993]

Sir isometric drawing piping wala ka video banaiye

[@bhrigurayyadav8243]

Sir ham kaise samajhenge ki ye symbol ISO me hai AWS me hai pleasa explain sir

[@WeldingandNDT]

Drawing mein likha rehta hai

[@bhrigurayyadav8243]

@@WeldingandNDT ok sir

[@prateektiwari6938]

This part is very good please do next part

[@WeldingandNDT]

Thank you. Please join my channel to support my initiative. Joining Link:kzbin.info/door/H7nXSievFlbRKzKzEySbkwjoin

[@AjayChauhan-ie9sj]

very nice video

[@WeldingandNDT]

Thank you. Please visit my website for notes, videos and other important informations www.weldingandndt.com/

[@CADGURU_MSA]

Thank you so much sir for your knowledge about welding.it will definitely help me in my courier

[@jamshedahmed5471]

exellent

[@WeldingandNDT]

Thank you. Please join my channel to support my initiative. Joining link: kzbin.info/door/H7nXSievFlbRKzKzEySbkwjoin

[@mani4r]

Pls do make the next part Sir .....ur fantastic your explanation is perfect and easy to understand!!! Thank you very much 🙏

[@santoshnazare2790]

Sir, Please Your Introduction .

[@mani4r]

@@santoshnazare2790 Santosh ji Are you asking me?

[@mechanicalpower9118]

Sir plz welding ka drawing kse padhta ha uspa video bnae...kse structure ya fir pipe line ka drawing ma welding symbol ka use dekhaya...MATLAB practical video bnae...

[@syedsajeedsajeed9305]

Thanks for information sirrrrrrr

[@WeldingandNDT]

Thanks. Please visit my website www.weldingandndt.com

[@rajeshkumarshort988]

Nice sir ji next part banao

[@WeldingandNDT]

Thanks. Please visit my website www.weldingandndt.com

[@mechanicalpower9118]

Sir plz use the welding rod for proper application.....make the video on welding electrodes

[@WeldingandNDT]

My next video will be on selection of electrodes for different materials. Please keep in touch

[@renjithvlog6339]

Very helpful

[@er.chandankumarsah2770]

Sir what do you mean by TYP in welding symbol

[@ranveerart8191]

show lap joint symbol

[@045_patilprathameshshriniw3]

Thank you sir 🙏🏻

[@WeldingandNDT]

Thank you. Please join my channel to watch all the videos. Joining Link: kzbin.info/door/H7nXSievFlbRKzKzEySbkwjoin

[@kamalgolla5317]

Very clear and understandable lecture. Thank you.

[@WeldingandNDT]

Thank you. Please visit my website www.weldingandndt.com/

[@binaykumaryadav7993]

Or drawing kaise dekhana hai bataiye please

[@WeldingandNDT]

Sure. Please visit my website www.weldingandndt.com/

[@naeemmohammad5049]

V.nice sir

[@ShakeelKhan-el2xo]

Sir cswip ke preparation ke liye video banaeye

[@WeldingandNDT]

Sure. Please visit my website www.weldingandndt.com

[@kasimsheikh924]

Dhanneyvad

[@mechanicalpower9118]

Sir ap ki next video kab AA rhi ha???

[@mukundthealone]

A very nice initiative sir.. sir code and standard pr v ek video bnaiye na sir pls.. code and standard Kya hota h....iska use kaise krte h aur q krte h? Maine "AWS D1.1" book download ki h but usko navigate kaise krna h sir smjh nai nhi aa rha h sir.. sir pls help me sir. I will so much thankful to you sir..

[@WeldingandNDT]

Sure. Please visit my website www.weldingandndt.com

[@shabddayalkhokhar3684]

Dear mukand madhav ji give me your no.

[@mukundthealone]

@@shabddayalkhokhar3684 9065728270

[@gurmeetjakria]

Thanks for clarifying

[@WeldingandNDT]

Thank you. Please visit my website www.weldingandndt.com/

[@doyouknow809]

Good job and make next video on this part and also smaw wps step by step

[@WeldingandNDT]

Sure. Please visit my website www.weldingandndt.com

[@mazheruddinmohammed4237]

Good job please keep continue Thanks for nice videos

[@RiteshKumar-hk8ci]

nice sir

[@TanweerAhmed]

Good explained #tanweerahmed

[@WeldingandNDT]

Thank you. Please join my channel to support my initiative. Joining Link:kzbin.info/door/H7nXSievFlbRKzKzEySbkwjoin

[@PrashantSingh-jt8hy]

In indian what we mainly use AWS or ISO ?

[@md.faiyazahmadkhan4072]

AWS

[@badalbadyakar8246]

Thank u sir

[@shashankshekhartiwari7564]

Good job

[@WeldingandNDT]

Thank you. Please join my channel to support my initiative. Joining Link:kzbin.info/door/H7nXSievFlbRKzKzEySbkwjoin

[@pradeepkumar-sx1ty]

crispy clear, i was searching for a perfect video, and finally got it. Thanks a lot sir, love u sir. I have a suggestion (feedback) and request for you sir. 1)suggession: please use a collar mic , it will save your energy as well as audio will be more clear. 2) request : please clear why have you not considered root face as in our vessel drawing everywhere we use root face of 2 mm

[@WeldingandNDT]

Thank you. Please join my channel to watch all the videos. Joining Link: kzbin.info/door/H7nXSievFlbRKzKzEySbkwjoin

[@gulshankumarshrivastava3189]

Nice video

[@WeldingandNDT]

Thanks. Please visit my website www.weldingandndt.com

[@Akhileshkumarp.]

Plz banayiye sir... Very informative video

[@WeldingandNDT]

Thanks. Please visit my website www.weldingandndt.com

[@WeldingandNDT]

Thanks. Please visit my website www.weldingandndt.com

[@pawann_singh656]

Thank you very much sir

[@neeleshdown]

Next part banaiye sir...

[@Yasdani123]

NYC sir

[@WeldingandNDT]

Thanks. Please visit my website www.weldingandndt.com

[@girishvanmalimistry5569]

Very helpful video , request to also teach the weld joint sizing

[@anuragsachan924]

Thanks a lot 🌹

[@WeldingandNDT]

Thank you. Please visit my website www.weldingandndt.com/

[@MohdSajid-wc5bw]

Thanks sir for your video, I learnt a lot from you....

[@WeldingandNDT]

Thanks a lot. Please visit my website www.weldingandndt.com/

[@dharmeshshah7528]

Sir .kindly upload a second part of this bcz it's a very useful for us.. I hope u will upload shortly

[@WeldingandNDT]

Thank you. Please visit my website for notes, videos and other important informations www.weldingandndt.com/

[@artibamne4905]

Sir dashed line uper or niche nahi ho skti hai Kya?

[@GouravKumar-qp3pz]

Mm dono standard ke according hi drawing bnai jati h ja bnti h...No.1-AWS No.2- ISO

[@GouravKumar-qp3pz]

Aur baki m madam Puri trah se Reed krke apki help kruga.. okey

[@pushkarsonar891]

At 18 mins, the symbol drawn is wrong. As the welding is happening on other side,thus the symbol for weld should be down of the reference line. Isn't it. Please clear if I'm wrong. Thanks

[@pushkarsonar891]

To be precise, 17.51 sec. AWS - 2nd example of groove weld

[@manishkumarsharma9360]

Sir oxy kol gass flame ka use kaha hota hai esake liye ek video banaye

[@WeldingandNDT]

Thank you. Actually watch time on NDT videos is very low, so I am not sure what to do. Still looking at the responses. Please visit my website www.weldingandndt.com/

[@paragpemgirikar2695]

What if the elementary symbol is below the reference line and the dashed line is above the reference line, then the weld is on the arrow side or on the other side?

[@mechanicalpower9118]

Sir bhut Shara metal hota ha unsab metal ma kon kon SA number ka electrodes use hota ha uspa video bnae...jaise cast iron,ss

[@ajaynilu6536]

Azad Akber yes

[@ajaynilu6536]

Azad Akber I also need it

[@tusharbhalla8235]

Many Thanks

[@WeldingandNDT]

Thank you. Please join my channel to watch all the videos. Joining Link: kzbin.info/door/H7nXSievFlbRKzKzEySbkwjoin

[@kameshmaruvada6465]

Can u explain how do we determine groove weld dimension is there any spec like bead width should be this much, cap height should maintain this please explain...

[@kcsanyasi948]

Sir gi aap se riqews hai ki1kg welding electrodes me kitana mites welding hoga 2.5 ka electrodes ho 3.15 ya 4 mm esaka colculation bataye please

[@WeldingandNDT]

Sure. Thank you. Please visit my website www.weldingandndt.com

[@mannumanazir537]

Thanks a lot sir.

[@ajaynilu6536]

Sir pipeline drawing ko read karna v bataye .... Please

[@WeldingandNDT]

Sure. Please visit my website www.weldingandndt.com

[@Jayprakash_YT]

Next part jarur banaiye sir

[@WeldingandNDT]

Thanks. Please visit my website www.weldingandndt.com

[@riza9769]

GOOD INFORMATION

[@WeldingandNDT]

Thanks. Please visit my website weldingandndt.com

[@sagarkumbhar5203]

Nice sir

[@WeldingandNDT]

Thanks. Please visit my website www.weldingandndt.com

[@babumuduli1014]

Nice sir next video send please my welding work

[@qyamuddinkhan848]

Sir arti fel na ho welding marne me kuc aadiya dijiye sir

[@WeldingandNDT]

Thank you. Please visit my website for notes, videos and other important informations www.weldingandndt.com/

[@mayurthombare3803]

Aap ki awaz ka echo aa raha he dhyan se sunana pad raha he uspe kuch kam kijiye. baki apki videos acchi hoti he👍

[@WeldingandNDT]

Thank you. Please join my Channel to support my initiative. Joining link: kzbin.info/door/H7nXSievFlbRKzKzEySbkwjoin

[@krishnasharma-vl8eg]

Tq so much sir

[@WeldingandNDT]

Thank you. Please visit my website www.weldingandndt.com

[@ramashishpatel6951]

Please continue

[@WeldingandNDT]

Thank you. Please visit my website for notes, videos and other important informations www.weldingandndt.com/