Torch Cutting Basics Everyone Should Know | Oxygen & Acetylene Fuel

  Рет қаралды 1,643,197

WeldTube

WeldTube

Күн бұрын

Matt from Warrior Welding Tx wants to show us how to properly set up and use a cutting torch. Safety is number one in any work environment so Matt goes over safety and some field fabrication as well as cutting techniques.
#WeldTube #southcoastweldingacademy #Welding
WeldTube Store
www.weldlife.com/
WeldTube Social Media
Instagram: / weldtube
Facebook: / weldtube
TikTok: www.tiktok.com/@weldtube?lang=en

Пікірлер: 845
@weldtube
@weldtube Жыл бұрын
👇WeldTube Store👇 www.weldlife.com
@BusurPetir88
@BusurPetir88 7 ай бұрын
Folow me sir
@Jim-qc6gu
@Jim-qc6gu 2 жыл бұрын
I am 74, retired fabricator, welder. In my learning stage, An experienced old timer taught me to use a center punch on the chalk marks, because the mill scale will pop off and you can lose your line if trying to free hand the burning.
@charlespageau5699
@charlespageau5699 2 жыл бұрын
Exactly what they teach us in welding school in quebec
@MikeSmith-qv5yc
@MikeSmith-qv5yc 2 жыл бұрын
Yes, hot-rolled steels do have that affect. Vibro-etch tools can also help in maintaining a clear guide line.
@mathewmolk2089
@mathewmolk2089 2 жыл бұрын
Same age and technique. You can see the flame break over the punch marks. Especially good for cutting curves without bothering with the circle burner attachment.
@zakkennedy2901
@zakkennedy2901 2 жыл бұрын
Yea.. you can do it like that or use a scribe but I prefer using the center punch
@stevenlight5006
@stevenlight5006 2 жыл бұрын
Nice tip
@TheZephlol
@TheZephlol 3 жыл бұрын
Here's a secret trick. The guide angle iron he's using, do a quick clean up with a flap disk, then get a soapstone and rub it on the angle. The torch will glide and you'll end up with a flawless cut
@dennishillman3502
@dennishillman3502 3 жыл бұрын
Thanks.
@cobes11
@cobes11 3 жыл бұрын
I have never used a guide on my torch cutting. Maybe why my cuts are ugly
@allannaborjr.8706
@allannaborjr.8706 3 жыл бұрын
thanks sir
@chadmoyer1453
@chadmoyer1453 2 жыл бұрын
@@cobes11 lol. Always room to learn. My cuts aren't perfect as well but I keep practicing. Good day
@anthonycusinato3969
@anthonycusinato3969 2 жыл бұрын
Here's the real "secret tip". Take that stupid little cheat-bar and throw it as far away as you can. And instead, just practice and learn to have a steady hand. Like a machine. I'll come into the shop any Monday morning, still half drunk and lay down a cut ten times smoother than what was shown here.
@Ticklethealgorithm
@Ticklethealgorithm 2 жыл бұрын
I had never used a cutting torch before and needed one today to make some mounting brackets. There was no one at the shop to teach me and it had to get done today. This video alone was enough to teach me everything I needed to know! Thank you for this!
@jordanbrown1337
@jordanbrown1337 Жыл бұрын
Get it 🔥🔥🤟🤙
@the_inquisitive_inquisitor
@the_inquisitive_inquisitor Жыл бұрын
It's pretty easy to pick up the basics, but hard to become *really good* at freehand cuts. Personally, I went for a 30A plasma cutter because it's easier to plug in an air compressor than it is to keep refiling gas tanks.
@ronklock9340
@ronklock9340 Жыл бұрын
@@the_inquisitive_inquisitor Good decision
@UserUser-ke4ti
@UserUser-ke4ti Жыл бұрын
Everything? LOL. I'm not being a smart ass, but that statement rings of famous last words....for instance...can you clear weldement with a torch, what size tip can you use? Wait until you learn just how much you can really do with a cutting torch. You'll be the best!
@jamesmatheson5115
@jamesmatheson5115 Жыл бұрын
Ive seen men who claim to be tradesmen and when I see their Oxy cuts straight away I know if they are full of BS or nor, I watched one so-called tradie melt the steel instead of cutting it, he didnt get the job, lol, and you learnt everything you need to know, oh my god.
@warrenosborne6044
@warrenosborne6044 2 жыл бұрын
I just turned 70, my dad got me started as a kid, but when you watch a pro such as yourself, there is always something to learn. Thank you !!!
@mylittlebrotherca9691
@mylittlebrotherca9691 Жыл бұрын
Sometimes not being "the smartest man in the room", is okay,knowing YOU are not "the smartest man", ( why "reinvent the wheel"). Knowing WHO is.,.well. I'm not in LEAVENWORTH or Guantanamo 🤗🤗🤗🤔SemperFi
@terrenceolivido741
@terrenceolivido741 Ай бұрын
I just consider this a young guy with a clear head and respect for this work.
@dennyo3992
@dennyo3992 2 жыл бұрын
"Take pride in your work and do it right the first time." That right there tells me this gentleman is someone to listen to. Thanks for this quality instruction.
@terrenceolivido741
@terrenceolivido741 Ай бұрын
god, our children or -- grand children -- or great grand children (!) are having a very very hard time. i believe any healthy kid today is longing to learn to do something usefull well. gas welding - in this case - well, it has been a staple of back to the landers for a long time. i am facinated a little by bronze welding, which i believe will serve many neccesities of a homestead.
@budm9982
@budm9982 2 жыл бұрын
Thanks for taking the time and having the patience to explain thoroughly. What is rudimentary to some is valuable to a beginner like me. Excellent intruction!
@willybones3890
@willybones3890 2 жыл бұрын
Agreed.
@mylittlebrotherca9691
@mylittlebrotherca9691 2 жыл бұрын
The smartest man in the room. My hat (cover..USMC) is off to you. We don't have to reinvent the wheel, learn from others failures & SUCCESSES! I am pleased the TRUE old school artisans of their trade share their knowledge before they are all gone.
@ronklock9340
@ronklock9340 Жыл бұрын
I like the way you take the time to shut down equipment then restart the process to make sure people understand
@johnanthony2545
@johnanthony2545 2 жыл бұрын
Good job and well explained. 40 yr retired industrial sheet metal journeyman. I still watch things I know how to do looking for tips lol. Never to old to learn. Any one who tells you they know everything about anything watch out for that guy.
@Rob-di7uu
@Rob-di7uu Жыл бұрын
I sold and demonstrated various welding/cutting equipment for over 40 years. Wish there were instructional vids as good this back then. Would of made my job a whole easier, as the trainee could of watched the vid. before going hot and picking up the equipment. 👏👏👍
@mattarnold4071
@mattarnold4071 Жыл бұрын
Thank you!
@ludwigritter2455
@ludwigritter2455 2 жыл бұрын
One of the top 10 most useful videos I've ever seen, I think. *This* is what the internet is for. Thanks for the free education!
@hobtink
@hobtink Жыл бұрын
FYI, for those of you just starting out or only doing you’re oxy/acetyl cuts infrequently this process will assist you in doing very well. But, it takes paying attention to the melting metal at the torch flame tip, as well as how the torch is clearing the cut material and if your hearing is still pretty good and not real noisy where you are at you can also benefit some from combining your visual indicators with your listening to the sound of the cut for popping and changes of air velocity sounds from the torch flame and gas flow. Also, don’t expect your first cuts to look as clean and slag free as his. He did not cover the importance of the condition of the torch tip face and nozzles which the torch tip face needs to be clean and free of slag balls on it and especially the torch nozzle holes need to be clean and not worn out, goose egged or larger at the tip from improper tip nozzle cleaning in their shape or oversized from excessive use and cleaning. Always Preheat before trying to cut, Keeping you torch cone flame height correct and steady not going up and down in reference to the metal being cut and/or banging the torch cutting tip face into your work especially the molten area will extend torch tip surface and cutting nozzle hole cleanliness and life of the tip. Get comfortable as field conditions allow or in any way needed to meet drawing accuracy tolerances on specified technical drawings for the cut of finished plate. Torch tip face and nozzle cleanliness along with preheat, attention to molten flow at torch nozzle as it cuts through the metal, and possibly the most difficult skill part a slow, deliberate steady pace based on visual and some listening feedback to the cut when you can hear well enough to use that and developed eye, hand and muscle coordination and feedback control of torch flame cone height from material and torch travel speed while constantly observing what’s happening at the cut. If you are not a good welder odds are the same parameters of attention to detail in weld puddle tie in, bead height and width along with really good eye and hand coordination and steadiness are key in both processes.
@brinnforthewinn
@brinnforthewinn Жыл бұрын
I’m just starting out and I’m struggling compared to my classmates. This comment was so helpful and encouraging. I really appreciate you today!!
@harkinjames
@harkinjames Жыл бұрын
Excellent and insightful commentary, all newer people to cutting torches need to read this 👍👍
@aerialrescuesolutions3277
@aerialrescuesolutions3277 10 ай бұрын
Very well said, keep the tip clean, and steady
@terrenceolivido741
@terrenceolivido741 Ай бұрын
god bless you. i am old, i now teach anything by first asking the student to relax and practice presence and awareness. by doing that we will learn. be present now - do not think of the end-goal, but begin to practice the basics. sigh, i am old !
@hobtink
@hobtink Ай бұрын
@@terrenceolivido741 yeah I too am old, old beyond my years nearly 68 in about 7 days. Living my whole adult life since 20 in Chronic pain from Fibromyalgia and more bad than good discs and vertebrae in my neck and a couple more in my lumbar spine and both SI Joints need mechanical fusing. I have not drawn or exhaled a comfortable breath since before I had to quit work at 51. I used to have a few good days every month or two but haven't even had that in many, many years. 2 heart attacks both with strokes, first at 45, second set at 55, 5 Bypass surgery 20 days past my 56th birthday, what a present. A third stroke Easter weekend 2023. I am sure I have had more that are not medically documented. Life has been mighty hard on me, but my Lord and Savior Jesus Christ has been mighty good to me. Got 3 grandchildren now basically 7,6 & 5. Girl(Harper I call her Hoppy because she hopped around so much when she was little), Girl(Charlotte I call her Charli) and the Boy Peter Lance Fraser the third(after his daddy and his daddy's, daddy, I call him Trey or Bubba). Praise the lord for allowing me to live to experience my grandchildren. Oh yeah and I had Cardiac Stent procedure in 2017 I think it was where the surgeon decided to open two blocked arteries on the back of my heart(low Blood Flow), he chose to open the arteries bypassed on July 20 2006 rather than open the Bypass arteries. Ans, I told him if he kept resting with his elbow parked on top of my bladder I was going to have to pee on someone, LOL. He had me on the table for about 5 hours opening up those two blocked arteries. Good Cardiac Heart Stent Surgeon. I am still cognizant but the bad low back discs have been causing me problems with my getting up, sitting down and walking, even falling at times due to the numbness in my thighs. I was all set to begin my neck and back surgeries when the RONA first hit and all, elective surgeries were postponed, then I was back on then the just about the time the second variant hit and back off again. Since then I have had trouble with my VA primary care Doctor not wanting to renew my community care and hopefully I am about to get that straightened out, I think it was budget related. If my new primary care won't renew community care I'm going to raise a stink until I get the care I deserve and need. I have an appt July 16 with them and I'll have to have another full round of X-Rays that show absolutely nothing even though it should sow the missing disc material at L3-L4, just the empty sack remains of that disc.
@davidrios8872
@davidrios8872 3 жыл бұрын
one thing i was taught was once tanks shut off always loosen the regulators too prevent high pressure when opening tanks again. good avdice and teaching. well done
@mobilemechanic2304
@mobilemechanic2304 Жыл бұрын
Im 35 and today after having the torch for 2 years i finally was able to cut the right way... I will continue to watch your videos and learn more thank you so much.
@ujijin3099
@ujijin3099 2 жыл бұрын
Matt, if I'd had you teach torch work in Metal Shop class 50 years ago I would have really enjoyed it. My life may have taken a different direction. Thank you.
@jesseray180
@jesseray180 4 ай бұрын
True. He’s so laid back and relatable
@terrenceolivido741
@terrenceolivido741 Ай бұрын
one of the nicest compliments that could ever be made. i got the same impression from Matt.
@Stevesbe
@Stevesbe 2 жыл бұрын
I got my dad's old victor torch set and the difference in quality between a newer victor set is unreal. My dad was a welder and got his back in the 60s
@jimirvine7311
@jimirvine7311 2 жыл бұрын
I'm an electrical contractor that needed to cut some 6" bollards that were on our job that needed to be removed. I have a cutting torch that I purchased a long time ago but never really used it. I really need to use it but didn't know how our feel comfortable in cutting the bollards off. After watching Matt I feel like I can now cut the bollards feeling comfortable! I can do this! Thanks so much Matt. You are the best teacher I've seen on KZbin!
@b.l.barfield2420
@b.l.barfield2420 11 ай бұрын
Exactly what I was taught 40 + years ago. Thanks for the video, now I can use this to introduce my Grandsons to part of my world.
@steeldesigns1500
@steeldesigns1500 2 жыл бұрын
I've been screwing around with cutting torches for years now, wish i had this lesson when i first started, would have saved a lot of frustration
@garysalerno1558
@garysalerno1558 2 жыл бұрын
I've been using torches about 45 years started when I was about 10 years old and I'll tell you what very educational you taught a few things I didn't know thank you
@fernandovega5722
@fernandovega5722 3 ай бұрын
Thank you for your professionalism. Very helpful and simple, yet very important information.
@GT-43
@GT-43 2 жыл бұрын
I've got a set up I made with a torch mounted stationary pointing down, and I have a slide table on rails. I just push it through like a table saw and get very clean straight cuts.
@georgebuck2269
@georgebuck2269 2 жыл бұрын
Yes, they make a radiograph, a motorized unit that holds the torch. It runs on a small track. You clamp the track to your plate and it cuts in a straight line.
@hnqbeam
@hnqbeam 2 жыл бұрын
Thanks so much for a clear cut - ABC style tutorial. I haven't used a torch since my welding class in high school. I'm excited to get back into it and this really helped me out.
@fredkoch100
@fredkoch100 2 жыл бұрын
I just start O and A cutting and have to thank you for the best basic lesson yet.
@vinniecarter7183
@vinniecarter7183 3 жыл бұрын
I have a acetylene torch that I haven't used for years. I will be using it in the near future. This was a great refresher video to watch. Thanks, Vinnie
@OhJeezRanders
@OhJeezRanders Жыл бұрын
Just in college taking a Oxy-Acetylene course for Carpentry apprenticeship and this video is my study guide for next week. Thanks a bunch
@StevenRathburn
@StevenRathburn 2 жыл бұрын
This is the best instructional video on any topic or subject I have ever watched.
@javierp537
@javierp537 2 жыл бұрын
Thank you very much for all the detail info. Liked to way when you started all over with the settings so no one gets confused. Not to many people do that
@bobbymiller8563
@bobbymiller8563 3 жыл бұрын
I didn’t know anything about welding with Oxygen & acetylene. I have to say you explain things very easy to learn. You are a Excellent Teacher.
@mattarnold4071
@mattarnold4071 3 жыл бұрын
Thanks Bobby! 🙏🏻
@johnwasikiewicz9609
@johnwasikiewicz9609 2 жыл бұрын
I've been using oxy/acetylene since around 1964 in high school and found your video a very good introduction. Although I've not made welding a full carrier it has come in handy during many instances of repairing or fabricating custom equipment and saved me money on auto and home repairs.
@AshIsBackV
@AshIsBackV Жыл бұрын
Great video, I use an oxy torch for thermal expansion at work to get stuck stuff unstuck, I’ve always wanted to try the cutting nozzle and now I’m going to. 👍🏽 At 15:20 ish I hadn’t noticed him change the plate, though he had leather hands to be able to touch it like that before I realised it was red paint. 😂
@fido3561
@fido3561 Жыл бұрын
🤣🤣👍
@the_inquisitive_inquisitor
@the_inquisitive_inquisitor Жыл бұрын
I was a pizza cook for 10 years before I learned how to weld and I'm pretty comfortable just grabbing 500F things.... If it isn't *literally* glowing then I can touch it without burning myself too bad.
@atlantajunglepythons1744
@atlantajunglepythons1744 2 жыл бұрын
3 minutes in, you've actually taught me more! Years ago I bargained svcs for a welding setup. Got library books, practised. Experience and trial are great, as is book learning, but tips and basics fillin those gaps. NOW, to learn TIG....
@silverram323
@silverram323 2 жыл бұрын
Great video, it’s been 10 years since I used I used a torch when I was in apprentice school for plumbing. That’s an awesome video to refresh me.
@spevakdesigns
@spevakdesigns 2 жыл бұрын
Easily the best oxy-fuel cutting video I've seen. Really like that you snuck some layout math in there too. 🤘
@phillipknowles1258
@phillipknowles1258 2 жыл бұрын
Best Acetylene video I have seen as I am learning. Thank you.
@nandito7021
@nandito7021 2 жыл бұрын
Finally i learn the abc of the cutting torch...i waited so long for someone to explain so precise and clean what to do how to adjust and when start cutting... You Rock buddy!!!
@willrisher6049
@willrisher6049 2 жыл бұрын
Thank you for the video, very cool. I used to be an hvac technician and performed numerous repairs and coil replacements which involved acetylene and oxygen as well. Never did I think it was capable of cutting steel like that 😂
@tyronekim3506
@tyronekim3506 2 жыл бұрын
It's been decades since I've done any cutting with a torch. I would have liked to have seen you cutting the 4X4 cutout as a demonstration exercise. Thanks for the tutorial.
@williepelzer384
@williepelzer384 Жыл бұрын
When I was in welding class 1975 the instructor old guy showed us how to cut. He had a 1" mild steel plate, scribed a 12" circle TOTALLY FREE HANDED cut it out. Then chucked it in the lathe it only took . 040 thousands to clean up in all axis. That man could cut. I lost the bet cost me a few beers but I also learned allot in that class too. Good job.
@americathefree3708
@americathefree3708 2 жыл бұрын
I have been using torch for years and you did a great job of explaining everything brother!
@shotgun7486
@shotgun7486 3 жыл бұрын
Very good information for the new oxy acetylene torch user.
@kentwalley1207
@kentwalley1207 2 жыл бұрын
Great video thank you. Being a novice jack of all trades, I some times need a refresher. This was perfect !
@christopherwheeler5091
@christopherwheeler5091 2 жыл бұрын
Thank you for the high quality lesson. Described in a way that anybody can understand this valuable skill.
@TheRealVocalist2010
@TheRealVocalist2010 Жыл бұрын
I started a Shoring job a few months ago and just off this vid I got great starter info and notes. Very detailed, precise, and quick. Nice video and instructions 👍👍👍🔥
@corkforbrains
@corkforbrains Жыл бұрын
Excellent Video Matt Arnold! Thank you for the fine job and taking the time to make this!! You can tell when you've seen a good video because it makes you want to grab up a torch and see if you learned something 😉
@nickhlawka7073
@nickhlawka7073 2 жыл бұрын
Very well done. Im not a welder/weldor, anymore but still weld for fun when I need to. Its fun to watch welding videos.
@lyallfairburn1275
@lyallfairburn1275 2 жыл бұрын
Thank you very much for the video. I'm a hobbiest and this helped me tons on set up and cuts. Great details and safety practices 👍
@NoknOnDors
@NoknOnDors 2 жыл бұрын
Great video, I've been using oxyacetylene torches for 5 years, and learning more and more gradually. Some things in this video confirmed what I've been doing, and some things I learned all new
@arictm
@arictm 2 жыл бұрын
One of the most well made and presented videos that I have seen on KZbin. Thanks.
@matthewgallant3622
@matthewgallant3622 2 жыл бұрын
Thanks for the explanation! I work in automotive and welding is an area I still have little experience in. Really want to expand my skill sets into this area.
@demitri8348
@demitri8348 2 жыл бұрын
Thanks for the tutorial dude very educational and easy to understand im excited to start my career in this trade. The hands-on experience is what I enjoy. I once tried torch cutting and Mig welding in college didn't think anything of it until later on i was good at it
@clintcowles7563
@clintcowles7563 2 жыл бұрын
Thank you for taking the time to show a step by step process.
@dieseldork6
@dieseldork6 3 жыл бұрын
Great video! Thanks for stressing safety as it seems like people forget it with gas welding and it can get scary really quick.
@waynepowell567
@waynepowell567 2 жыл бұрын
Excellent presentation. Gas/Oxy seems to be a almost forgotten part of the industry . Not many take the time to do gas welding . So a BIG thanks for the edification. Stay safe.
@mathewmolk2089
@mathewmolk2089 2 жыл бұрын
In hobby shops,,,,yes. - In construction and actual industry, No,,,,,except for plasma,,,,but you seldom see Plaz in the field. No real professional uses a cutoff wheel in a Metabo.
@hejpadigdigdu
@hejpadigdigdu 2 жыл бұрын
@@mathewmolk2089 True out in construction and the industry we use gas/oxy cutting a lot, and we also use plasma for when we cut down/disassemble silos. Sometimes its just way more time efficient.
@joshuahodge1181
@joshuahodge1181 2 жыл бұрын
18:44 most impressive part... Drawing a darn near perfect circle by hand! Good video mate.
@isaacguilbeau1154
@isaacguilbeau1154 2 жыл бұрын
I really appreciate how you teach on how everything is being taught you makes it easy it be cool to meet you I went to welding school in Washington state didn't finish do to family stuff going on I went into pipe welding miss hearing the sound of a welding machine going and all the bells n whistles that go along with the field of welding thank you for helpful video
@terrenceolivido741
@terrenceolivido741 Ай бұрын
i liked this guy pretty quickly. i can be very critical of amateur presenters on youtube. i was very happy and grateful for his delivery and presentation.
@BigDaddyKrapper
@BigDaddyKrapper 11 ай бұрын
Thanks! I have not used the torch for cutting in about 8 years and needed a refresher on the pressures and flame setting.
@avBToo
@avBToo 2 жыл бұрын
Excellent video. Great technique, great tips. You are so right about NOT overtightening. Only thing I'd add is you mentioned safety multiple times, but you don't have the steel toe'd shoes. Some sites require it, and you even mentioned how dropping the piece or the dross on the hoses is going to be bad news. Same goes for toes. Thanks for the hard work and giving back.
@Ingveyisnthome
@Ingveyisnthome Жыл бұрын
Really great teacher I really enjoy your style andg the fact you go over it and show the subject twice. Keep them coming please
@bklynpa
@bklynpa 2 жыл бұрын
excellent video, well organized, with safety as the key, Thank you, I'm sure this will help me stay safe in my endeavor into metal working!
@Dr.CandanEsin
@Dr.CandanEsin 3 жыл бұрын
Near perfect, detailed, highly useful education video. Thank you!
@75Prelives
@75Prelives 2 жыл бұрын
This was an excellent step-by-step step tutorial. Soup to nuts. Well done. Thanks.
@jempareynolds8092
@jempareynolds8092 Жыл бұрын
Us beginners are enjoying the lesson to it's end. Thumbs up sir. Pliz stay blessed.
@TheFarmacySeedsNetwork
@TheFarmacySeedsNetwork 3 ай бұрын
I haven't used a torch in 10+ years.... Wanted to review before doing any hotwork again... exaclty why you said... lot of gas and lot of potential... This was excellent! Thanks for the great walk through and safety guide! subscribed!
@st.michaelthearchangel7774
@st.michaelthearchangel7774 6 ай бұрын
New welding student here; this video was very helpful from what I remembered in my recent class; you covered the process for a lot of the stuff I learned in class. However, in my class I learned that keeping the regulator completely cleared and clean of any oil, grease, or petroleum products physically on the regulator, otherwise that can cause an explosion. Also, never wear nylon or polyester clothing, because the sparks and fire can cause a fire or melt your clothing if it makes contact with your clothing, and never use the torch to blow off your clothes with just the oxygen, since that is a safety hazard to ignite your clothing, I believe. Also, make sure your boots are not nylon and your pants are fully covering your boots, and make sure your welding jacket is fully buttoned up and sleeves tucked into your gloves, and don’t forget to wear your beanie to protect your hair from catching on fire. There are a bunch more safety measures involving the oxy acetylene tank and oxygen tank for making sure all the parts involving the regulator and such are functioning properly, and checking if there any leaks (I think you can use soapy water near the nuts), and there’s also flashback that we need to be aware of. Thanks so much for the video.
@Energy15Real.2uning1n
@Energy15Real.2uning1n 2 жыл бұрын
Thanks for being thorough. I'm going to use your presentation for my Welding class.
@donaldhawthorne5384
@donaldhawthorne5384 2 жыл бұрын
Good reminder if your still learning, basic video was superb, helps to know the basics Thanks Matt😑
@magyarninetysix9821
@magyarninetysix9821 2 жыл бұрын
You’re an excellent and confidence inspiring teacher. Well done from England.
@ryanmapes5577
@ryanmapes5577 3 жыл бұрын
Thanks man I'm learning as I go I had my flames all worng probably why my cuts are hard to do really helpful
@jameskrivitsky9715
@jameskrivitsky9715 3 жыл бұрын
Great presentation of starting mix-gas cutting. I enjoyed and learned while relaxing after all this Houston rain we have been getting. Turkey & Coke on a Friday eve....and education value. Thanks JwgK
@tobyhollander3
@tobyhollander3 2 жыл бұрын
Thanks for the explanation. Much appreciated, and FYI you are a excellent teacher.
@Tallrs
@Tallrs 3 жыл бұрын
Great video on Torch Cutting. Just wanted to add three more items that should be done. 1 - Like all the comments below ALWAYS ALWAYS back off the regulators after closing the main bottle valves then OPEN the torch valves to bleed off any gas pressure in the lines/torch then reclose the torch valves. 2 - Just before opening the main bottle valves open the torch valves to ensure no gases have built up pressure in the lines/torch from leaking by the main valves and regulator. 3 - I always clean the torch tip after someone has used it or had a bad blow back. This takes all of 5 minutes, unscrew the nut holding the tip and remove it for inspection ensuring no damage to the seating surfaces then run the proper size hole cleaner through each hole then take a small drill and chamfer the holes just slightly and again run the hole cleaners through each hole to remove any burrs that might have been left in the holes. This will ensure you'll have a clean cut every time.
@georgebuck2269
@georgebuck2269 2 жыл бұрын
That's how I was taught in trade school in 1967.
@mathewmolk2089
@mathewmolk2089 2 жыл бұрын
Like I said before. That is exactly the way I HAVEN'T been doing it for over 60 years and none of out Union Ironworkers amd Millrights don't do it your way either. We use both hand and machine torches in the shop 6 days a week here too. (Just for the record we have had manifolded gas and oxy since like 1970. and used liquid oxy bottles on field projects longer then I care to remember. If I caught a guy taking a drill to a tip like you are talking about I'd send him down the road so fast nobody would remember what color his truck was.
@vincentbenedetti1289
@vincentbenedetti1289 2 жыл бұрын
Awesome video ! Love the way this guy teaches. Thanks Matt!
@Anvilbanger
@Anvilbanger 2 жыл бұрын
THANK YOU! I just learned of several things I've been doing wrong for quite awhile.
@kimmethyazzie2548
@kimmethyazzie2548 Жыл бұрын
I'm making a small wood stove for a cabin and I bought the miniature bottles to use. My dad and brother used the torch set bit I never did. It's a good time to learn. That's for the video.
@BrucePierson
@BrucePierson 2 жыл бұрын
When you shut down after used, it's important that after turning off the cylinder valves, you open the valves on the torch to remove the pressure from the hoses, then turn the regulator valves anticlockwise to shut them off.
@mathewmolk2089
@mathewmolk2089 2 жыл бұрын
In school, yes, In the real world, no. Same as lighting the torch. After you have been using a torch for a while you set the oxy and gas and light it together too. None of this gas first then oxy. like the school teachers tell you. - If it's so bad how do burning machines with auto ignition work? POP! that's how. And how do i know these things.....Been doing it that way since 1959.......I got torches and regulators that still work just fine that are older then the kids that are trying to tell me I have been doing it wrong,,,,for over 60 years.
@BrucePierson
@BrucePierson 2 жыл бұрын
@@mathewmolk2089 Yes, exactly. I do the same thing, a little oxygen, then a little gas and light it. Saves all the black smoke.
@459thunder
@459thunder 2 жыл бұрын
Great video. And you are correct, safety is number one.
@electrician240
@electrician240 3 жыл бұрын
Great video. Im not a welder but from time to time i have to use the cutter and this was good training.
@jeffw2494
@jeffw2494 6 ай бұрын
Thanks, great tutorial. I haven't gas welded since the 70's, and just inherited my dad's victor set. If it could only talk. Thanks for both the refresher and some great teaching. Give's me a bit of hope, as I move forward. Now stick, tig and mig are in the horizon at some point.
@kirkhepburnmiddleagedwhiteguy
@kirkhepburnmiddleagedwhiteguy 8 ай бұрын
Hey thanks for taking the time to share your knowledge. You're an excellent teacher. Great video.
@aral2dmax
@aral2dmax 8 ай бұрын
Love this instructional videos there the best on you tube. I took welding in college and the professor always sent us to watch WT. 👍🏻👍🏻👍🏻 I agree with the gentleman below me, yes use a center punch where your going to make the initial hole. Also when cutting use a slight minuscule angle when dragging and cutting so as not to get any mill scale into your flame tip.
@michaelcorbo6458
@michaelcorbo6458 3 жыл бұрын
Wow great vid .tinkered with torches , but learned more in your vid than all the time listen to others who say they know how. Thanks so much
@andyc5612
@andyc5612 3 жыл бұрын
Great vid. Well presented. Young man is switched on, your students will benefit from this. Keep up the great work.
@razabazal4669
@razabazal4669 2 жыл бұрын
This might very well be the best welding channel on youtube
@weldtube
@weldtube 2 жыл бұрын
Glad you think so!
@pierroalino
@pierroalino 3 жыл бұрын
Thank you for the video, and for utting safety first. Regards from France
@RD-ox3ce
@RD-ox3ce 9 ай бұрын
I’ve worked with some good burners over the years and picked up good tips from them when it comes to Oxy Propane or Acetylene cutting.
@traktorworks3200
@traktorworks3200 2 жыл бұрын
just to point out one VERY IMPORTANT step i think you missed. when you are getting ready to cut and are going to turn on your gasses from the bottles to the cutting tool you should as a first step back off the valve tap on each bottle on the bottle side, or make sure the valve is completly shut. doing this ensures that if you open the bottle tap the pressure of the gas doesnt HIT the cutter side gauge and blow the diaphragm as the shut off bottle side valve will stop this direct gas flow. once you are ready you slowly open the bottle side valve letting gas through to the cutter side valve where you adjust the pressure to the cutter tool. but baring that one small item i think your vd is as good as i have seen. wishes from australia.
@zekethefishgeek8690
@zekethefishgeek8690 2 жыл бұрын
VERY NICE... I SEE WHY YOU'RE THE MAN FOR THIS TEACHING JOB... The company you work for is VERY lucky to have you to teach... you do so very well!!!
@WELDERMADEHEADBANDS
@WELDERMADEHEADBANDS 3 жыл бұрын
Great video Matt, very clear and thorough💯👍🏽👊🏽🦅
@Thornsbaby
@Thornsbaby 2 жыл бұрын
I’m going to my states welding and fabrication team and I am the torch cutter for the team and this helped me so much
@comingtofull-ageinchrist6736
@comingtofull-ageinchrist6736 2 жыл бұрын
you hear a whistle going back up your hose, quickly go turn the Acetylene fuel off! Never use a butane lighter to light the torch! Never carry a butane lighter in your pocket while cutting! Words of wisdom from my instructor 41 years ago! Great video!
@aaronblack7187
@aaronblack7187 2 жыл бұрын
This is a great explanation and demonstration of proper technique very thorough thanks
@senatorjosephmccarthy2720
@senatorjosephmccarthy2720 2 жыл бұрын
This is best class on running a touch I've seen. Great. We sharpened our soap stones on any nearby concrete. Allowing a tape (measure) to snap shut even that amount will lengthen the hole the rivit is thru that holds the L. One of my tapes is over a sixteenth out at any length. But then again, the tape's been on a lot of jobs since 1979, Ha!.
@richhinners2882
@richhinners2882 2 жыл бұрын
Ok, I'm gonna say it, if you have been using the same tape since 79 you deserve a new one. As a carpenter I used to go through one a year or so. To be fair, that tape got pulled out of the pouch 20 or 30 times an hour.
@Abu_Daud
@Abu_Daud 3 жыл бұрын
Great material. Keep on going guys, really helpful!
@the4flatgarage
@the4flatgarage 3 жыл бұрын
You're a great teacher. Thank you.
@patrickroy414
@patrickroy414 2 жыл бұрын
Thanks I really needed a refresher. Back to work.
@kevinkenney5228
@kevinkenney5228 2 жыл бұрын
wow, guy really explains it without fluffy words. I didn't know gas welding was so dangerous. I appreciate the cautions. I can see how that angle iron guide was so handy. Same as using a circular saw. If I cut with a circular saw freehand, I can see the wiggling in the finished cut. Same with his metal cutting.
@iggybest1601
@iggybest1601 2 ай бұрын
Outstanding educational video, I have learned a lot about using the torch. Thank you!
@johnrutherford9454
@johnrutherford9454 7 ай бұрын
Hey man for what it's worth I've never seen any of this. I got a wild hair one day, got my equivalency and started going to classes for welding. I think they all have the same mindset that you do as far as everyone has seen this. I just wanted to take a minute to share that so you know there are people like me out here that you ARE helping 😂 never been around a welders/gas torches. Thank you for all your videos, It's been my religion lately
@kennywoods5404
@kennywoods5404 2 жыл бұрын
I really appreciate your knowledge. Please don't stop.
10 TORCH CUTTING POINTERS (Never Use Your Grinder Again)
12:51
Austin Ross
Рет қаралды 191 М.
The Full Guide to Oxy Fuel Cutting
45:05
Weld.com
Рет қаралды 1,2 МЛН
ОБЯЗАТЕЛЬНО СОВЕРШАЙТЕ ДОБРО!❤❤❤
00:45
Playing hide and seek with my dog 🐶
00:25
Zach King
Рет қаралды 37 МЛН
Schoolboy - Часть 2
00:12
⚡️КАН АНДРЕЙ⚡️
Рет қаралды 5 МЛН
EVOLUTION OF ICE CREAM 😱 #shorts
00:11
Savage Vlogs
Рет қаралды 12 МЛН
How to die while arc welding at home: the top 5 ways | Auto Expert John Cadogan
23:10
Auto Expert John Cadogan
Рет қаралды 1,1 МЛН
Intro to Oxy-Acetylene Welding - Part 1
11:54
We Build Stuff
Рет қаралды 1,1 МЛН
CUTTING TORCH BASICS (SECRET TO A CLEAN CUT EVERY SINGLE TIME)
25:08
4 Types of Welding Explained: MIG vs TIG vs Stick vs Flux Core
11:27
The Surprising Genius of Sewing Machines
18:43
Veritasium
Рет қаралды 10 МЛН
How to PIPE-FITTING Basics
25:02
WeldTube
Рет қаралды 924 М.
Oxy Acetylene Basics: Cutting, Welding & Heating with a Torch
11:07
Let's Talk Oxy Acetylene
18:52
This Old Tony
Рет қаралды 1,8 МЛН
ROCKET that LITERALLY BURNS WATER as FUEL
19:00
Integza
Рет қаралды 2 МЛН
Oxy-acetylene Torch Setup: Tips To Get Started
13:44
Dunham Service
Рет қаралды 19 М.
САКЕНДІ ҚАТЫНЫ ҚЫЗҒАНЫП ҚАЛДЫ
0:31
Ән - көңілдің ажары.
Рет қаралды 462 М.
BYD U8 танковый разворот
1:00
YOUR NEW AUTO
Рет қаралды 3,2 МЛН
Застрял подо льдом😨 #freekino
0:35
FreeKino
Рет қаралды 951 М.
You have to stir it good 👌 (ib: tt/michael_bias)
0:21
Samuel Grubbs
Рет қаралды 60 МЛН