Wen Rotary Tool 23114 with Flex Shaft/How to use it and applications.

If you are new to using the Wen Rotary Tool model 23114 then this video will help you to install and use the accessories that came with the kit.I also demonstrate some of it's many uses.The Wen Rotary tool 2305 is just as capable however it does not come with as many bits.I would highly recommend either of these models if you are into art and crafts.Great tool for a great price.
My redbubble store link www.redbubble....
Wen rotary tool model 23114 amzn.to/2MP2wr8
Wen rotary tool model 2305 amzn.to/2MK4OIo
Assorted collet set amzn.to/2JKyUKO
Diamond bit set amzn.to/2IX89m5
Diamond cutting wheel amzn.to/2MKKjuV
DISCLAIMER: Links included in this description might be affiliate links. If you purchase a product with the links that I provide I may receive a small commission. There is no additional charge to you!
#wenrotarytool#rotarytool#over60crafter#rotarytoolreview#flexshaft

[@nadiasanowarphotography]

Another easy to follow video!

[@over60crafter]

Thanks.

[@ruffynd]

I've had this thing for 4 years and didn't know how to use half of of the attachments. Thanks for the awesome video!

[@over60crafter]

Glad I could help!

[@galactic904]

Same here, lol. She's good

[@over60crafter]

Thank you.

[@allisonbeaulieu7644]

Just got my rotary tool and had no idea what any of the attachments do or how to use them. That was so helpful. Thank you!!

[@over60crafter]

You are so welcome!

[@got_to_roll]

I must have watched a dozen other rotary tool reviews before seeing yours. By far the best! Concise, informative, organized and thorough. Thanks for making this video, I now know this is the tool to buy.

[@over60crafter]

Thank you for taking the time to leave such a glowing review on the video.

[@gloriamoore7637]

I bought one of these for my granddaughter and her husband and bought one for myself also. I always wanted a dremel but didn't have the money to spend. After watching this video I am confident now to go out and get stuff done! I will say the video was well done and I clearly understood the directions. I just had to hit pause a few times to find each element that she was presenting. Thanks much!

[@over60crafter]

This rotary tool is amazing for it's price.I was also looking for a cheaper alternative to the dremel and I don't regret this purchase. Thank you for your comment.

[@brianamayo2234]

Thank you for this video! There's not many videos for the Wen rotary tool and how to use the attachments. And thanks to your video I was able to figure out how to attach the cut off wheel and complete an important project last night. Many thanks😁😇💫💯

[@over60crafter]

Glad it was helpful!

[@NJ911Scott]

One of the best demo videos that I’ve seen in awhile! Nice job!

[@over60crafter]

Glad you liked it!

[@cathym5106]

This is probably the best instructional video for a tool that I have ever watched. I was a little intimated by this tool at first since I've never used anything like it before. It's nice to know I can come back to the video if I need help. It's all totally clear!

[@over60crafter]

Thank you for the feedback.

[@gonzr2012]

Same as the many here: You answered lots of questions in a very simple and easy way to follow. Thank you

[@over60crafter]

Glad it was helpful!

[@dreadnegus]

Blessings Trinidad. Good video. You know your tools. I have the same model Wen and haven't used it yet and it's my first rotary tool so this video helped. Thank you.

[@over60crafter]

You are welcome.

[@galactic904]

Wow, she is a great demonstrator, thank you so much for this, you make sound pretty easy

[@over60crafter]

You are most welcome.

[@grods20]

lady... loved your review and your channel... best regards from nuevo leon, mexico

[@over60crafter]

Thank you.

[@RABALAK]

You lady, got another subscriber. Good job, keep going!

[@over60crafter]

Thank you.

[@caroljena]

Excellent tutorial. It was very thorough and it helped me tremendously. I was ready to give up on this WEN rotary tool. Booklet leaves a lot to be desired. I was having a very difficult time attaching the flex tool, but your video showed the complete steps where others left out .

[@over60crafter]

Glad it helped

[@mpsv8426]

Thank you for uploading this video!!!

[@over60crafter]

My pleasure!

[@driveramd12]

Outstanding presentation! Glad I saw it before buying it

[@over60crafter]

Thank you.

[@tinadavis4374]

This is a great video thank you I had no idea how to put the attachments on

[@over60crafter]

Glad it was helpful.

[@kimdevito1168]

Great video can tell you put a lot of work in

[@over60crafter]

Thank you.

[@over60crafter]

Thank you.

[@MyLifeThai371]

Best demonstrator!

[@over60crafter]

Thank you.

[@herwanderlustlifestyle]

Thank you so much for the awesome tutorial on ways to use the attachments!!!

[@over60crafter]

You are welcome.

[@pattihill952]

Wonderful video!! Thanks for your time and the instructions were clear and easy to follow

[@over60crafter]

You are so welcome!

[@aidaa.5232]

Thank you. I almost returned it. You have a new subscriber.

[@over60crafter]

You will be glad you did not return it

[@Crystal_Yapper]

Great video! How to use the tools is what I needed to know. I saw other videos but they don't show anything about the tools.

[@over60crafter]

Glad it was helpful!

[@GodsGirl83]

This was excellently explained..you sound like a Trini..great video

[@over60crafter]

Thank you. I am a Trini.

[@martyrose]

THANKS! This is SO helpful. I bought this tool because I have some stripped screw heads. I never would have figured out how useful this tool is without your video. Great job! :)

[@over60crafter]

Glad it was helpful.

[@martyrose]

@@over60crafter It's SO hel[pful I'll have to watch it at least 100 more times! Thanks again! :)

[@donjanh]

The owners manual its terrible! This is a great video, Wen should give you $$$ for this. Thank you!

[@over60crafter]

You are welcome.

[@mgh_777]

Informative and helpful, thanks!

[@over60crafter]

Thank you.

[@shirlinramnarine8741]

A rotary tool sure has lots of uses.Thanks for the info.

[@over60crafter]

You are welcome.

[@kathyh9423]

THE BEST video for these tools! Exactly what I needed and so grateful for your help.

[@over60crafter]

Thank you.

[@gloriamenchero1926]

Thank you! I just got this tool and this video has been very helpful to start using it.

[@over60crafter]

Such a useful tool glad the video helped.

[@aswee01]

Thank you so much for this, now I know how to use all those thingies!

[@over60crafter]

Happy to help!

[@nancyriosmonsivais6009]

Me sirvio de muchisimo su video me encanto saver todo sobre el mototol me boy acomprar el mio

[@over60crafter]

Muchas gracias, me alegro de que lo hayas disfrutado.

[@tlojewelrylove]

I bought this rotary tool kit and wondered how to use the router attachment so thanks so much for the demo! I guess now I just need to figure out which bit to use to cutout wooden (or metal) shapes. Thanks again. This was excellent!! 👍🙂

[@over60crafter]

I would recommend amzn.to/3zxDDdP for cutting out shapes in wood.

[@rellemade]

Your videos make things easier. I think I can take on some projects on my own now. Thanks for sharing.

[@over60crafter]

Glad to help

[@raoulandrewdulawan7502]

Nice video! Very simple, straight forward, and informative.

[@over60crafter]

Thank you.

[@NCcutey]

Thanks for making this video. I received one of these as a retirement gift but didn’t know how or what to use it for.

[@over60crafter]

Glad it was helpful!

[@nlames]

Excellent tutorial!

[@over60crafter]

Glad you liked it!

[@troysatterfield8817]

Great video. Although I was hoping you would be the one . To explain the different speeds of WEN 1- 6 and max on the difference applications from polishing,grinding,drilling, and cut off . I will of course still subscribe ,as your video has been the most thorough I found it thanks and keep up the great work

[@over60crafter]

Glad it was helpful!

[@joelsmith2991]

Thanks for the great introduction to this tool. 👍

[@over60crafter]

You are welcome.

[@babagalacticus]

you remind me of my auntie who just passed away recently; someone i loved dearly. TRINI in da house!!!😄 i would have been interested 2 c just what YOU use this 4 so i have a better idea of if it's potentially useful 2 me personally. but after using a DREMEL 3000, if i do purchase anything anytime soon-ish it will most likely be a FOREDOM i must say the price i found makes it an appealing gift idea. a terrific tutorial nonetheless & i even p/u a useful tip! thank you. you sound as if u were a schoolteacher perhaps. 🙏🏽

[@carlottagivens2585]

Thank you very informative great job

[@over60crafter]

Glad it was helpful!

[@emzolie]

Very detailed review! Great job 👍🏽

[@over60crafter]

Thank you Emily.

[@radleyisidore1900]

Thank you so much! I just got mine and looking forward to make my own stuff; your video was a great introduction. I'm suscribed :)

[@over60crafter]

Thank you.You won't regret purchasing it.

[@MAS-ASSASSIN]

Great video thanks for brilliantly describing the tool and its accessories you got a new subscriber 👍🏾

[@over60crafter]

Thanks for the sub!

[@i8dpie]

Excellent tutorial, just what I was looking for.

[@over60crafter]

Glad it was helpful!

[@Robinw-eu3gx]

Thank you for a great video. The best I have seen! Can this tool cut a brass garden hose stuck on the spigot/faucet?

[@over60crafter]

I don't see why not today I had to cut off four 1/4 thick bolts and the nuts went back on easily,only thing I found that with just one of those cutting discs it was taking a bit long so I screwed on two and it worked like a charm.

[@lbush8261]

This was a great vid ... Thanks !!!

[@over60crafter]

Thank you.

[@RickyD1968]

Very good Video !!!

[@over60crafter]

Thank you.

[@madfzr]

Great video! Very helpful thank u!!

[@over60crafter]

You are welcome.

[@Scoupe400]

Nice. Informative. Any idea which bits are best for smoothing rough stone, then which to polish stone - advised compound?

[@over60crafter]

Thanks,I have never tried it,but I will,but from what I have read you can use either sanding drum bands or the diamond bits and finish off with the polishing wheel.

[@trinbagophotographyphilant8464]

Very good video. Like the size of this model

[@over60crafter]

This model is definitely chunkier than the blue model.

[@anilsagramsingh1322]

Got to get me one if these.Thanks

[@over60crafter]

Great tool,you would wonder how you ever managed without one.

[@ibrahimsalag8428]

good

[@over60crafter]

Thank you.

[@mtdanceprojects]

Very helpful! Many thanks!

[@over60crafter]

You are welcome.

[@donaldjones7058]

Great video I am doing some curve cuts on metal, what bit do you suggest ? Thank you

[@monroeriggs7492]

Can you show how to change the collet?

[@BiciNick]

How do you pull out shaft?

[@keylupveintisiete7552]

I didn't know you could use it under running water that's amazing for glass sanding so there is no problem with getting a bit wet the flex shaft? Thanks for a great video 👌

[@over60crafter]

Should be fine once you use the flex shaft.

[@keylupveintisiete7552]

@@over60crafter Thanks a lot (:

[@KosherGoddess]

Great review! You convinced me to get it, I am over 60 crafter myself. Can you recommend the diamond cutting wheels, I need to cut some metal and glass? I was trying to cut the metal pin (fixing my ironing board) I broke 3 cut off wheels that come with it, so I am ether doing something wrong or need stronger like you using on min 7 of your clip. Thank you so much.

[@over60crafter]

Thank you. The link for the cutting wheels that I use for glass is below the video in the description.

[@DEG1985]

Very good video, possibly the best on KZbin, thank you ... I have subscribed to your channel ... Muy buen video muchas gracias.... Me he subscrito a su canal...

[@over60crafter]

Thanks for the sub! Glad you enjoyed it.

[@salsoteca72]

I need help with attaching things to the collet, when I fit it on when the nut is not there it fits and when the nut is there it doesnt

[@over60crafter]

Can you send me a detailed message here facebook.com/Over-60-Crafter-436579470433049 and I will see if I can help.

[@salsoteca72]

Over 60 Crafter I got it to work, ty

[@over60crafter]

@@salsoteca72 Great.

[@firebladex8586]

so you completed over 60 projects? ;) I never thought of using water when cutting glass. Good tip.

[@over60crafter]

Lots more than that,the over 60 is because I am currently 62 years or over 60.

[@nskmda]

everything is great, good demo. i didn't know this little beast could cut tile... but @ 5:22 looks like you don't really like your knives... :)

[@over60crafter]

Thanks.I used it to install some tile around a faucet just be sure to keep water running on the cutter other wise you would go through those things pretty fast.

[@Giggidyflanders]

Love your video! I'm in the market to buy one of these or something similar, do you think this engraver device will be suitable to engrave an arabic verse letters on a ring?

[@over60crafter]

I would not recommend it for such an intricate design.

[@tammygurl64]

That was a great review. I've lost my drill and thought I'd get one of these (or the older model you showed). I need it for a very specific reason. Can you please tell me if it will hold wire sizes 20 gauge to 14 gauge where you normally attach the accessories bits? I need a rotary tool I can use to twist and coil wire for my jewelry hobby. The extra useful benefits would be a bonus. I'd really appreciate your help. Thanks! 🙂

[@over60crafter]

Hello,I don't have wire on hand to test but it can hold a 1/8 inch wire,but you can also get a set of collets that would fit the wire you intend to use,I put a link for the assorted set below the rotary tools.

[@tammygurl64]

@@over60crafter👍 Awesome! Thank you so much! I've never owned or used a rotary tool so I didn't know. At the moment I have a pen vise which is ok for really small projects but I'd like to expand my jewelry skills and start twisting wire, making jump rings, etc. You told me exactly what I needed to know. As long as that part/collet is interchangeable I'm good to go! Thank you so much for your help! Have a great week! 😊

[@over60crafter]

@@tammygurl64 You are most welcome.

[@musicaltidalwave123]

Can this tool be used on resin? For carving?

[@over60crafter]

Sorry I haven't tried it on resin.

[@WayneBarroncffcs]

would have been nice had you allowed us to hear the sound of the tool. I read reviews where they state it is very loud.

[@over60crafter]

It's not that loud. Lots of videos out there with the sound.