Wera Tool Check Mini Add-on for Knipex Cobra Mini, LED, Rapidaptor & Victorinox Swiss Army 7 Knife

[@stein3dconcepts]

I am very happy about the positive feedback on my models. Thank you very much for your support! I am working on creating and offering further variants - but this will take time. Please understand that I cannot design holders for expensive special tools, as this is very time-consuming and not worthwhile for rarely used models. I also have to make sure that the models can be realized on as many different printers as possible. However, if you are willing to pay something for such a special project, we can talk about it. I am particularly happy to receive your suggestions for small, clever tools that will usefully extend the function of your set. A big thank you to everyone who supports my channel - whether by watching, subscribing or contributing ideas! Together we can make this great tool set even better. Happy holidays

[@DavidKraus1]

Really nice work! But before you go ahead and design 10 different versions, would it not make sense to have a more modular design? So just the side piece with the rapidaptor and then space for 3 "foldable flaps" (one for each tool). Then everyone can mix and match what they want or go ahead and design their own extensions. I guess since it does not matter if the flaps are upside down you can have one flap design that works for the front and the back. So e.g. two flaps for the front and one for the back or a spacer if you only want one or two flaps.

[@kaik.1053]

Great idea! May be another option would be a Leatherman holder on the back and a Knipex 70 01 110 in the front

[@GruvisMutt]

These keep getting better and better!

[@MarkZumkeller]

OK, that's just absolutely ridiculous! I love it!

[@dieterschnecker6505]

Toll, super gemacht!

[@Chrisandknife]

Krass. Das ist richtig gut.

[@benjleath9406]

Love this set !!! It has everything that you need !! 😁👍

[@deanb949]

No 1/2" breaker bar

[@deanprince8602]

Very clever and very good.

[@derschlotter5605]

Great job 👍 it looks like a stock part. 👌🏼

[@stein3dconcepts]

Thanks! 👍

[@MacStrange]

Hi, it would be interesting to have a version with the Leatherman Wave with a steel, instead of the torch the smaller Rigid pipe wrench. Then it's perfect

[@sukyokim473]

Upgrade, upgrade, and more upgrades❤

[@stein3dconcepts]

And it gets bigger and bigger - still a Tool-Check Mini? 😅

[@ChriDDel]

​@@stein3dconcepts you could add a big box shaped space where you could put in all your tools. I would call it "tool box" 😂🎉

[@stein3dconcepts]

@@ChriDDel Indeed, I have already thought about it. But I'm still thinking about the size and the locking mechanism. I don't want to just construct something quickly, it should be well thought out ;)

[@mainhead888]

Интересно, а на бензопилу это можно прицепить?

[@RKogi]

Thanks a lot ! Very inspiring

[@jayjohnson6848]

These are awesome. Any chance on modifications for the regular tool check plus?

[@stein3dconcepts]

as already written a few times, its not that easy to adapt on the "classic" tool check

[@SofiaisSunshine]

I cant find that version of the tool check anywhere. Not even on their website. All they have is the automotive, bicycle and plus versions

[@stein3dconcepts]

It is linked in the description, its from the 2024 advent calendar

[@PatrikEdelberg]

Great but the Toolcheck you show is different to the one from Christmas calendar, isn’t it?

[@stein3dconcepts]

Its from the calendar, but I modified it with 3d printable parts ;)

[@nichterreichbar787]

Es ist der hammer welche Möglichkeiten sich uns durch 3d druck eröffnen Ich könnte sowas höchstens aus stahl bauen dann aber so klobig und schwer dass man gleich ne ganze werkzeugkiste nehmen kann 😅

[@Keitsch77]

I love it! But where exactly do you guys get that little metal socket holders?

[@stein3dconcepts]

Metal clamps amzn.to/3OWweuQ (NOTE: They are not the same as Wera's, they can be bent a bit to make them fit, but this is no fun (lots of try and error. I would be happy to receive tips for improvement)

[@TheHoaxer37]

Dose this fit the Wera tool check plus

[@stein3dconcepts]

not yet, but wait until the weekend 😉

[@TheHoaxer37]

@ could you let me know would love one

[@nuuwnhuus]

​@@stein3dconceptsThat would be amazing 😍

[@batmanpaul1]

That’s fantastic

[@plightn]

Beautiful!

[@stein3dconcepts]

Thank you!

[@thelred-ph3lq]

Nice design

[@steffrouen]

Can we buy this extension ?

[@RKogi]

Why do you ask without even looking for the answer ? He took time to put all the infos in the description and you can't even check it.

[@steffrouen]

@@RKogi I’m not english. I speak bad english. Sorry if i don’t understand all. Bye

[@RKogi]

​@@steffrouen Désolé pour ma réponse qui manquait de tact. C'est juste qu'en plus de partager gratuitement son travail en vidéo, il y a tout indiqué en description avec le lien de chaque outils etc. Ce que vous demandez est littéralement le premier lien en description... Cela paraît plutôt être de la flemmardise et l'attente de tout avoir sur un plateau et non une réelle barrière linguistique mais si tel est le cas alors vous venez d'avoir la réponse 😊 De plus, il indique qu'il ne peut fournir que le fichier 3D et non la pièce déjà imprimée car c'est un particulier avec une simple imprimante 3D chez lui. Cependant il existe des prestataires qui peuvent vous l'imprimer moyennement finance ou bien un copain ou connaissance qui pourrait vous le faire. Sur ce, je vous souhaite de belles fêtes de fin d'année Cordialement Léo

[@steffrouen]

@@RKogivoilà une explication que je comprends car ma lecture anglaise ne m’avait pas permis.

[@exrez83]

can you make one for the full sized tool check plus too?

[@stein3dconcepts]

not so easy to adapt, we'll see

[@Fynn-r7b]

Sehr schönes Video

[@stein3dconcepts]

Danke für das Lob!

[@Fynn-r7b]

Hallo ich bin Fynn Lang ich finde deine Idee sehr schön Könntest du mir die Druckdatei schicken?

[@WhoisJoker97]

Coole Arbeit 👍. Planst du die Upgrades auch für das normale Wera Tool Check Plus rauszubringen?

[@stein3dconcepts]

ich will es mir mal anschauen, die Adaptierung ist dort leider nicht so einfach wie beim Mini

[@WhoisJoker97]

@ die Nachfrage nach solchen Upgrades für das normale toolcheck plus ist bestimmt größer als beim Mini. Das Mini gab es ja nur im Adventskalender und ist bestimmt deshalb nicht so weit verbreitet. Vllt fällt dir ja etwas gutes ein 😉 ich bin gespannt

[@joevogt2853]

Hi, wo hast du das Tool check Mini gefunden?

[@stein3dconcepts]

ist in der Videobeschreibung verlinkt, is im aktuellen Wera Adventskalender ;)

[@robholland5925]

A question you probable get more often but I just found you so here goes. Do you sell these or just the printing file ?

[@stein3dconcepts]

h have a partner in the USA who prints the parts (link in the description)

[@robholland5925]

@ I think your based in Germany. As I’m in the Netherlands shipping from Germany would be easier and cheaper for me. If that is not a option that is fine too off course

[@Yoalx]

Do you ship to México?

[@stein3dconcepts]

its a download (3d-printable file) can be shipped everywhere a soon as there is internet

[@MeshRoun]

Blue wera bit holder! How?😮

[@stein3dconcepts]

Every color you can print - blue, gold, transparent... 😉

[@MeshRoun]

The whole handle is 3d printed? So the material is different than what Wera produces, correct?

[@brucelee-tn2mg]

bitte h😪🤣abe keine ahnung wie ich da rann komme

[@KentRobertSwickJrAroudTheWorld]

Sweet Jesus take my money!

[@traxxassuperx3455]

Kann ich die fertigen Teile bei ihnen Kaufen ?

[@stein3dconcepts]

Moin, bei mir leider nicht, da ich mit meinem Minidrucker keinen Qualitätsstandard liefern kann, die ich mit gutem Gewissen verkaufen kann. Zudem habe ich keine Kapazitäten mich um Versand und Retouren zu kümmern. Bisher habe ich nur einen Druckpartner in den USA gefunden (zapwizard.com). Wenn jemand in Europa daran interessiert ist die gedruckten Teile zu vertrieben kann er sich gerne bei mir melden.

[@janbo274]

Gibt es irgendjemand der das in Deutschland drückt und versendet, für die Leute die keine 3d Drucker haben?

[@gunny3878]

Tolle Idee. Ich finde den halter für das messer nicht.

[@stein3dconcepts]

Was meinst du findest du nicht?

[@gunny3878]

Im Shop finde ich den Halter für das victorinox nicht.

[@raphinesse7756]

Fehlt nur noch ne Säge

[@stein3dconcepts]

Schau dir das Messer gerne mal an 😎 eine Säge ist drin, einer der Gründe, warum ich genau dieses Modell gewählt habe! Beste Grüße!