Always good to mention that there's a " Break-in" period. I have the FS56RC and after 3 tanks of fuel it was WAAAAY better/stronger than at first start. Great trimmer for 5 acres.
@WesternEquipment2 жыл бұрын
Good info to know! Thanks for that and thanks for watching!
@billwaite72972 жыл бұрын
@@WesternEquipment how do you install plastic blades on it. Do I need some sort of adapter?
@marionfrieze97182 жыл бұрын
So explain the breakin-in.period. If you would....I bought it brand new yesterday. Have ran a couple tanks thru it already.
@tpires30242 жыл бұрын
@@marionfrieze9718 Sorry for late reply, I haven't been signed in. So, basically the Break In just means or consists of running the trimmer. The more you use it, when brand new, you'll find that it starts running better. Like quicker throttle response, higher RPMs, and most importantly...more power. Same thing with new chainsaws. Usually after 5 full tanks of fuel through it you'll be able to tell. Hope this helps.
@shaunpreston28396 ай бұрын
Iv just brought a fs 55 and no running in period is needed, that has been done in the factory already!
@sallyperkins4043 жыл бұрын
Thank you! This helped me start mine right up! I’m a single mom and have never weed eated before .. I watched like ten videos before I saw this one and none of them were helpful for me so thank you for explaining it so well!
@WesternEquipment3 жыл бұрын
Well I am glad I could help and thank you for watching!
@rah54drp492 ай бұрын
Thank you for this video. My husband recently died and the weeds were out of control. I had never used this equipment before and I got a lot of the weeds gone today. Too hot to do it all but now I know how to use this tool.
@landonbedwell4642 Жыл бұрын
I had mine for almost 3 years and I put it through heck and it still running like a top these are some good weedeaters
@WesternEquipment Жыл бұрын
Thats what we like to hear right there.
@MrMeowmixcookies2 жыл бұрын
100,000+ views and only around 800 likes come on people! You're getting to see how it works, how it runs and what it takes and requires before purchase so you know how it helps your needs or doesnt. Lets go
@WesternEquipment2 жыл бұрын
Thank you for that and thanks for watching!
@aidenblake6692 Жыл бұрын
I have one of these weedeaters, it is the most reliable weedeater i've ever had. It is 6 years old and still kickin on the same carb, sparkplug and shaft!
@WesternEquipment Жыл бұрын
That's what we like to hear! I have been selling and using Stihl equipment for over 10 years and it has proven over time to be top notch.
@truckercowboyrobertharris67873 жыл бұрын
Got a Stihl FS 56 RC. It's the best trimmer me and dad ever ran. It's more than 2 years old. We bought it back in the summer of 2019.
@WesternEquipment3 жыл бұрын
I agree, it is an awesome unit! Thanks for watching!
@tcda36402 жыл бұрын
We have five acres we only use Stihl machines FS 90 and two of these mentioned. Over four years used.Love the durability . Thank You Stihl
@johnclarke6647 Жыл бұрын
I bought my FS-56 RC- last week and had 1.25 tanks on it. Today, I primed it 5 times, put it in full choke and cranked it on the first pull. I then pushed it down to half choke and let it run there until the rpm stabilized. I then cut with it for 15 minutes, cutting some pretty weedy areas. I am very pleased with it and it is a lot easier to crank than my old Husqvarna 28L. It is running a mix of Stihl Moto Mix and my standard 45:1 Stihl Ultra with premium non ethanol gas.
@WesternEquipment Жыл бұрын
Awesome! I am glad you are liking your new trimmer! Any reason behind the mix of fuel?
@danielmims84673 жыл бұрын
Just bought one of these . Pretty impressed this is my first Stihl trimmer I have a Stihl chain saw but first trimmer I bought. Seems like a legit base model straight shaft . Works great
@WesternEquipment3 жыл бұрын
Glad to hear you are liking it and thanks for watching!
@therandomman66473 жыл бұрын
I spent $600 on my stihl km91r with the edger and strimmer attachment and it's not slacking off on paying itself off, it's the best machine I've ever had
@WesternEquipment3 жыл бұрын
This is AWESOME to hear! Glad it is working out well for you, Thanks for watching and thanks for the comment!
@therandomman66473 жыл бұрын
@@WesternEquipment once it warms up I will do a 2 year review on my channel if you want to watch
@79dogface2 жыл бұрын
Just purchased this model. Seems to idle high. Works really good.
@WesternEquipment2 жыл бұрын
Awesome! I hope you are happy with it and thanks for watching!
@danielpadgett28314 жыл бұрын
I would let it warm up before going full throttle. Great review though I have this same unit and I love it
@WesternEquipment4 жыл бұрын
You’re right. Thanks
@WillZipf4 жыл бұрын
pete ziriaah damn bought mine today and was excited to use it and went full throttle without even thinking.
@DaPoon2533 жыл бұрын
You actually don’t want 2-strokes to idle, you’ll foul the plug
@danielpadgett28313 жыл бұрын
@@DaPoon253 if you let it idle for long period of time you are correct
@DiegoMcElveny3 жыл бұрын
@@DaPoon253 your right but I let mine file while it’s warming up, after that when I set it down I’ll shut it off. Even if it’s really quick
@nathantuckerville5732 Жыл бұрын
I had mines for about a week & I love it! Great demonstration on it!
@WesternEquipment Жыл бұрын
Nice I am glad you are liking it and thanks for watching!
@craighellberg43662 жыл бұрын
Since winding the string on is what you most often do it it would be nice to have seen you do that.
@WesternEquipment2 жыл бұрын
You are right, I should have done this. Since there are so many different head options on these machines I will have to do a video on all of them and how to use them. Thanks for watching!
@stevenbrown5210 Жыл бұрын
Just bought one today, trying it out tomorrow!
@WesternEquipment Жыл бұрын
Awesome! I hope it went well!
@markcurnutt3925 Жыл бұрын
Awesome video! You did a great job explaining key features and the right way to start it up. Also kudos for showing the parts to keep an eye on for maintenance. Stihl should hire you to demo their products.
@WesternEquipment Жыл бұрын
Thank you and I am glad you enjoyed it. Do you have this unit?
@johnclarke6647 Жыл бұрын
My new FS-56 RCE came with a 26-2 cutting head. It is a lot easier to load than the 25-2
@Jim95er3 жыл бұрын
Thanks for the actual demo! Helps a ton
@WesternEquipment3 жыл бұрын
Glad I could help. Thanks for watching!
@coreypoirier9362 жыл бұрын
I have the same exact model very reliable had over a couple of years and I use the pre mix but I never use half choke I only use full choke of the trimmers been sitting and then I squeeze the handle to shut the choke off and runs fine after
@WesternEquipment2 жыл бұрын
Love to hear good experiences! Thanks for watching!
@judgedreddthelaw34183 жыл бұрын
Nice video sir! I work with a crew that uses the fs91 but for my own residence that would be overkill. This model is just right! Great demonstration as well!
@WesternEquipment3 жыл бұрын
Thank you so much for the comment and thanks for watching!
@timothyleary63662 жыл бұрын
What blade can be put on a FS65RC Stilth weed eater?
@papayamusicofficial794110 күн бұрын
Excellent explanation. Details at best and well expressed. Thanks brother. Cant find anything on your clips on how to start a cold chainsaw. Thanks anyways!
@ryangibson19005 ай бұрын
Just bought a like new 56 2nd hand for $100. Owned a55r for 15yrs or more put it through hell and never let me down. Love my stihls! How does echo compare anyone ran them side by side over long term?
@luciamary56412 жыл бұрын
Thank you. Great video. I just bought one today here in Barbados. Had a great demo before I left the store but could not remember all that was said. Can't wait to try it out.
@WesternEquipment2 жыл бұрын
Awesome! I hope you enjoy it and thanks for watching!
@jordanbabbitt52372 жыл бұрын
Did I ocall o
@yuhmur57052 жыл бұрын
🇧🇧🇧🇧
@robberthutton64613 жыл бұрын
Please do a tutorial on loading trimming line
@WesternEquipment3 жыл бұрын
I will get this on the list. Thanks for watching!
@darlenethaxton19843 жыл бұрын
I just purchased this unit today and this is my first time operating a weed eater. So, my beginner question is, how do I know when to replace the string? I should have asked this question in the store, but, I was all tied up in how to get it started and use it.
@WesternEquipment3 жыл бұрын
Awesome, I hope you like it! So when you notice no more string is coming out when you bump then head on the ground it is time to take the cover off of the head and see if you are out of string or if it is just broken off. I wish there was an easier way to check it but that is really the only way. I hope this helps and thanks for watching!
@darlenethaxton19843 жыл бұрын
@@WesternEquipment , thank you for responding. Yes, this helps!
@debralounder38103 жыл бұрын
Mine has notches you put your fingers in them to turn. i feel it’s difficult to turn. I won’t buy this brand again They (the store)switched out to an old school head I have to wind, not happy .
@t_rue80903 жыл бұрын
Could you do a video on how to restring it please?
@WesternEquipment3 жыл бұрын
I will get it on the list. Thanks for watching!
@pathodge23483 жыл бұрын
how long does the strings last
@steveniksid5874 Жыл бұрын
Great video. I would have liked to learn more about the msrp price and how to switch to a saw blade attachment.
@WesternEquipment Жыл бұрын
You can check out must of their pricing online at StihlUSA.com after you chose a dealer and then I have another video on the channel going over the blades that you can check out as well.
@steveniksid5874 Жыл бұрын
@@WesternEquipment thank you!
@bigfootbyrd91193 жыл бұрын
Yessss!!! Finally someone video is really GREAT!!!!! very interested to watch.
@WesternEquipment3 жыл бұрын
Thank you and thanks for watching!
@jeffwoods56711 ай бұрын
Why didn’t they put a grease fitting on the shaft for sprocket grease?
@manyfeather2knives423 Жыл бұрын
Would have liked to see how the line is loaded
@WesternEquipment Жыл бұрын
If you go on our 247Parts channel i have videos over a couple of different head options and how to load them. I didn't show that in this video because of the fact that you can change to different heads.
@6butcha62 жыл бұрын
most ppl have the most trouble feeding new line into the head & what was it you never covered ?.
@WesternEquipment2 жыл бұрын
Stay tuned! I will be doing a video on the different cutting heads and how to use them soon! Thanks for watching!
@callmebackfriday2 Жыл бұрын
Should I get the more expensive one - STIHL FS 56 C-E $300 or the cheaper one Husqvarna 128LD $250 ? Thanks in advance.
@WesternEquipment Жыл бұрын
Tough call. Both are good machines. I would compare warranties, parts availability in your area, and serviceability if needed. These things would be what I would be looking at to make my decision.
@callmebackfriday2 Жыл бұрын
@@WesternEquipment Thanks for your information.👍
@roadrunner6946 ай бұрын
I have both, sthil for 13 years, starts every time, knock on wood, the husqvarna 6 years, problems started after 2 years, I'm done throwing money after bad and still can't get get it started, I wanted to like it but I don't have time to mess with it when it is costing too much and not starting, go with sthil, it will save you a lot of headaches.
@callmebackfriday26 ай бұрын
@@roadrunner694 Thanks for the advice. 👍
@roadrunner6942 ай бұрын
The 128 husqvarna only lasted me three summers, only home use, never mistreated, I replaced the carburator, coil, sparkplug, fuel lines and still wouldn't start, I just gave up on it,I liked it because it was attachment capable, but the quality is not there, my fs55 sthil starts on first or second pull,after twelve years.
@MrMeowmixcookies2 жыл бұрын
Left store before pulling trigger on this. Wanted to do one final research. You did awesome appreciate it. Only thing I wanted to know because Im a noob is.. When it does run out of wire, are you refilling it with like a cheap under $10 thing of stihl line OR do you have to buy that $40 all inclusive plastic head each time you need to replace line?
@WesternEquipment2 жыл бұрын
I'm glad this helped and yes, you can replace just the line in the head. Thanks for watching!
@kyleRS87 Жыл бұрын
I’ve used mine twice so far around the house. I will also use it with a blade for clearing brush on my 5 acres up north. Can’t wait to see how it holds up!
@WesternEquipment Жыл бұрын
Let me know how it does with a blade. It is not recommended to use a blade on this model so be careful!
@kyleRS87 Жыл бұрын
@@WesternEquipment I’m going to get a blade guard for it. What’s the reason they don’t recommend a blade exactly?
@user-vk6jn5yd4b Жыл бұрын
I just purchased that same exact unit from my local stihl dealer. It works great as advertised! Awesome power!! The only thing I’m struggling with is getting the trimmer line to feed properly. I’ve had to stop every 10-15 min or so to open the head and pull out the line. Any suggestions on how to successfully use the bump auto feature??
@WesternEquipment Жыл бұрын
The thing I see the most is when too much line is wound into the head at once. Then you start to get hangups, so just be very cautious and precise on putting the correct amount of line into the head. This varies on whichever head you are using so make sure and follow the recommended amount when you are refilling your line.
@PhillipDrumz Жыл бұрын
Could you please do a review of the FS91R? - that would be awesome
@DerrickTMoon3 жыл бұрын
Still is a good brand overall. Good investment.
@WesternEquipment3 жыл бұрын
Very good brand! Thanks for watching!
@howardstephens458510 ай бұрын
Nice demo trimming the building & concrete there. I was hoping you' d show this trimmer working through some tall grass & weeds to lite brush that i'll encounter in my yard. I guess i'll have to watch other videos.
@billgraham56092 жыл бұрын
Thanks, I'm looking at buying at one
@WesternEquipment2 жыл бұрын
Glad I could help and thanks for watching!
@greenmarine52 ай бұрын
Follow the owners manual and this thing will start in 1 pull every time maybe 3 if it's sat dormant for a few months. I own 2 Husqvarna chain saws a 440e and a 460, both of them I have to mess with for a 1/2 hour to get them started. I'm selling them and getting Stihl's
@keithienmason4643 Жыл бұрын
I have a Stihl fs56 RC string trimmer with a auto speed feed trimmer head on it my trimmer head is bigger than your regular string trimmer head
@WesternEquipment Жыл бұрын
Nice! Do you like it?
@realjighead42822 жыл бұрын
Hello. Great demo & review, thank you. I just got the FS56RC-E & was wondering if a rattling noise when idled on the ground is normal? When I set the line trimmer on the ground there is a rattling noise that sounds like its coming from the shaft at idle speed. Other then that it seems great. Runs fine & goes away when I give it gas. I was wondering if this is normal with this model because my previous trimmer was a FS80 & doesn't make this noise.
@WesternEquipment2 жыл бұрын
This may just be because the carburetor needs to be adjusted just a little bit to make it not idle so hard. Good question and thanks for watching!
@deeznuts89672 жыл бұрын
I wondered the same thing, I asked my local guy. He said it is completely normal, the clutch makes this noise when the shaft is spinning almost fast enough to disengage the clutch
@realjighead42822 жыл бұрын
@@deeznuts8967 I tried adjusting the carbs, checked the flex shaft & re-lubed. Still made the noise. I ended up tightening the 3 bolts in a row on the bottom side of the engine cover close to the trigger & that has fixed it! Hope this helps
@marionfrieze97182 жыл бұрын
Hi....nice demo. Thank you....I just bought mine. Use to run a 90 r.... Now have the Fs 56rc-e. .this is more for light weight use?.....Have pretty large property.
@WesternEquipment2 жыл бұрын
Yes, this is going to be more of a residential model that the FS90R. Thanks for watching!
@rickyhenry49582 жыл бұрын
Trying to decide between this and the four stroke fs91
@WesternEquipment2 жыл бұрын
Both are good trimmers. You will get more power with the FS91 and the ability to use the metal blade attachments safely. I hope this helps and thanks for watching!
@namc64192 жыл бұрын
Looking to get this after using the fs55 I have been borrowing and it is very reliable
@WesternEquipment2 жыл бұрын
Great choice. I hope you enjoy it and thanks for watching!
@geovannyaguirre45662 жыл бұрын
If you can, can you talk about what attachments can fit a blade, please? What types of blades there are? Also, what applications require a blade?
@WesternEquipment2 жыл бұрын
Check this video out kzbin.info/www/bejne/ZpvEoJeKpLiJY7c. I think it will answer most of those questions. Thanks for watching!
@geovannyaguirre45662 жыл бұрын
@@WesternEquipment excellent, thanks!
@Damian242714 ай бұрын
That black plastic ridged part on the shaft between the handle and trigger, is it meant to spin round and round? And what’s the use for the part?
@billhman Жыл бұрын
yeah, very nice trimmer. However, It would be nice to know if this unit can accept a cutting blade. Note some units like the 94 straight shaft will not take a blade.
@WesternEquipment Жыл бұрын
It is not suggested to use a blade on this unit either.
@shaunpreston28395 ай бұрын
Straight through wind clockwise, I don't fill the spool rite up though or it can get too tite!
@randyd.70762 жыл бұрын
I do enjoy my FS56RC and your equipment review! I do have a question: how do I grease the trim head?
@WesternEquipment2 жыл бұрын
I’m glad you are enjoying your trimmer. The way to these this is to take the head completely off of the shaft and then take the cutting unit off of the head and then pack grease into both sides. Thanks for watching!
@randyd.70762 жыл бұрын
@@WesternEquipment Thank you for the information!
@frogtoesdynamite5741 Жыл бұрын
you didn’t cover greasing the gearbox? lots of newer models have removed the grease nipple, but it still needs maitenence
@WesternEquipment Жыл бұрын
You are right. I will have to hit on this in another video. Thanks for the heads up.
@LtJAS3 жыл бұрын
I wonder if they are going to be on sale Nationwide for Father's Day??
@caymentelger89523 жыл бұрын
I just picked one up for my dad today because our local stores sale ends today at 6
@WesternEquipment3 жыл бұрын
Good question, I will have to look into this. Thanks for watching!
@anthonystriani262611 ай бұрын
Why didn't you tell Gearbox maintenance. Because my Fs56 had be placed replaced
@rubenm47773 жыл бұрын
How about the use of the strap?
@WesternEquipment3 жыл бұрын
It works well, especially if the machine is too heavy for a person. I personally do not use the strap but it is a nice option to have. Thanks for watching!
@MichaelKurtzhals65 Жыл бұрын
How about showing the blade being used on it and the handle bars. I'm really curious if it can handle the blade.
@WesternEquipment Жыл бұрын
You should not use the metal blades on this machine.
@bettybellerive30762 жыл бұрын
Great video! I just purchased this trimmer. Starts good, runs good. After running hard for a couple hours the very first day, when it idles it intermittently makes a high squealing noise. Not an engine noise, but like something is rubbing, or catching. Only when at an idle. Any thoughts? I do have a video of the noise, if needed. Thank you!
@WesternEquipment2 жыл бұрын
This is interesting. You could try emailing me the video at brent@west-equip.com and I will see if I can give you and answer. Thanks for watching!
@bettybellerive30762 жыл бұрын
@@WesternEquipment thanks! I'll send the video
@realjighead42822 жыл бұрын
Hey. Did you ever find out what the noise is or if its normal? I just got a FS56 & if I let it idle while sitting on the ground there is a rattling noise that sounds like its coming from the shaft. It runs great & only makes the noise when left in idle while on the ground. Was this the noise yours was making?
@edwardwrong3173 Жыл бұрын
Clutch problem
@kendalledunkle48223 жыл бұрын
I have the same weedeater!! I found the strap makes it more annoying to use
@WesternEquipment3 жыл бұрын
I agree, when I use one personally I do not use the strap. Thanks for watching!
@KevinCampbell-un5qe Жыл бұрын
I have this and fs 111. The 111 whole different level but cosidered brush cutter
@WesternEquipment Жыл бұрын
Yes, this is true because it had a solid metal inner shaft which allows it to accommodate a metal blade for brush cutting or trimming.
@douglasperez5952 Жыл бұрын
Excellent, very good demo. Thanx Sir.
@WesternEquipment Жыл бұрын
Thank you and thanks for watching!
@msclecarcrzy4 жыл бұрын
I have the older version of this. FS55R. Still runs great 👍 I love the gaurd on the stihl. Took it off once and it blew grass all over me. Great review! 🙂
@WesternEquipment4 жыл бұрын
Thanks for the continuous support!
@ronniegibson85773 жыл бұрын
My dad has a 55r and it is around 20 years old. It starts on the 1st pull every time
@alvesthegreat2 жыл бұрын
Please help me... Bought a brand new one and for the love of God it can't start no matter how many times or how hard I pull
@psacgvolunteers2 жыл бұрын
@@alvesthegreat Do you have the choke engaged?? The engine cannot start if you're choking it out. Try starting it with the choke wide open and if it still refuses to start, try squeezing the throttle completely while you're pulling. What model do you have?
@alvesthegreat2 жыл бұрын
@@psacgvolunteers I have the fs55.... I did choke it... But it's so hard to start my shoulder is now sore.... A friend of mine came and emptied the gas... Then he started it then refilled it..... Weird
@bryan-th3xf Жыл бұрын
hey why did mine only come half assembled , i still need the head attachment and i have the fs56rc-e that i got for $200
@WesternEquipment Жыл бұрын
Did yours come in a box? they should be fully assembled from wherever you bought it from?
@bryan-th3xf Жыл бұрын
@@WesternEquipment no it came by itself with some instructions Zip tied together, got it at ace hardware new
@bryan-th3xf Жыл бұрын
@@WesternEquipment should i return
@shirley9066 Жыл бұрын
Wanted to see you put the string on.
@WesternEquipment Жыл бұрын
I have some videos on doing this on our other 247Parts channel. Have you checked those out?
@estelaburciaga1772 жыл бұрын
Good demostration you said very good I give 1000👍to your way of explaining love it and sound is quite
@WesternEquipment2 жыл бұрын
Thank you so much and thanks for watching!
@doublesharp57954 ай бұрын
Nice review but it would be nice to show refilling line - that is always a pain
@MyGoose242 жыл бұрын
I did my research , Stihl and Milwaukee are the only trimmers made in the USA , problem is finding a placed that sells them ?
@WesternEquipment2 жыл бұрын
Both of these companies have a dealer locator tool on their website! www.stihlusa.com/ I hope this helps and thanks for watching!
@MyGoose242 жыл бұрын
@@WesternEquipment Thanks so much , I tried Menards and Home Depot . no success
@George-on3zm Жыл бұрын
Great Video! Thanks. I just bought this
@WesternEquipment Жыл бұрын
Thank you and I hope you enjoy!
@40sigsauer3 жыл бұрын
Great review! Thank you!
@WesternEquipment3 жыл бұрын
Thank you for watching!
@DiegoMcElveny3 жыл бұрын
I was going to go with this unit for my mowing business but went with the Srm 225 instead
@WesternEquipment3 жыл бұрын
Probably not a bad choice. Thanks for watching!
@DiegoMcElveny3 жыл бұрын
@@WesternEquipment you bet.
@TXLoneStar_3 жыл бұрын
How's that 225 work out for you? Mine was bunk.
@luisvalencia77882 жыл бұрын
Yup. Buying one!
@WesternEquipment2 жыл бұрын
Awesome! Thanks for watching!
@davidroe26572 ай бұрын
This is an excellent video, thank you!
@aimemann48674 жыл бұрын
What is the diameter of the shaft,also can we install a weed blade steel wire ? Thanks
@WesternEquipment4 жыл бұрын
Shaft is 1" and yes i think you could get by with some steel wire but you would need the FixCut Cutting head.
@carlosrosas58423 жыл бұрын
I got a brand new one. I just can’t make it start. I’ve been watching videos and tried all the recommended tricks to no avail
@WesternEquipment3 жыл бұрын
I wish I had some advice to give. May just need to take it to a local repair shop... the advice nobody wants to hear. But thanks for watching!
@Dante-vf4sd3 жыл бұрын
If you got a new one contact the place you purchased it from and send it back under warranty.
@1on1c53 жыл бұрын
This is the best weed eater I have ever owned. Hands down beats the Husqvarna model I had before.
@WesternEquipment3 жыл бұрын
I'm glad you are liking it and thanks for watching!
@albertopapi44453 жыл бұрын
Greetings, Great video, well explained! Q: Due to the engine size, Can I put a weed plastic blades kit to the FS56? I will appreciate your response.
@WesternEquipment3 жыл бұрын
Yes, you can put the plastic blade kit on this machine. Thank you and thanks for watching!
@cloudbase77992 жыл бұрын
I think you missed one key maintenance point: replacing string...?
@WesternEquipment2 жыл бұрын
You are right, but I now have videos on our other channel, 247Parts, to show how this is done. Thanks for watching!
@JoeFidler3 жыл бұрын
What size line does this model take? Great video!
@WesternEquipment3 жыл бұрын
It can use various different sizes depending on which cutting head you use, but it will come standard with the orange .095. Thank you and thanks for watching!
@JoeFidler3 жыл бұрын
@@WesternEquipment awesome! Thanks for the response. Excellent video!
@simonev97 Жыл бұрын
Goes well for tall grass or fs 70 is better?
@WesternEquipment Жыл бұрын
An FS70 would have more power than this unit.
@ipguyman1082 жыл бұрын
What about loading wire..?
@WesternEquipment2 жыл бұрын
I will have a video on loading the head coming out on my other channel 247Parts soon so stay tuned and thanks for watching!
@JayMoney-tw7tg8 ай бұрын
Can you use this for commercial use or no
@delgado2x3 жыл бұрын
So iv had mine for a few months now and lately iv been starting and running it and it shakes a lot and i don’t know what it is!
@WesternEquipment3 жыл бұрын
This could be a few different issues. I could be a fuel issue as in the machine may be pulsing so it could be your fuel filter or carburetor. Another thing is the plastic sleeve inside the shaft that protects your drive cable could be worn causing that drive cable to be flopping. Also you might check the screen on your muffler because it may be clogged causing your machine to have a hard time breathing. I hope this helps and thanks for watching!
@830cesar5 ай бұрын
What mat do you have in your desk?
@nj830 Жыл бұрын
can i use this for commercial lawns?
@WesternEquipment Жыл бұрын
Of course! Especially if you are only going to be using a string head.
@willmill4095 ай бұрын
Does this.model support attachmentd such as the pole saw
@AtlanticCanadianGamer2 жыл бұрын
Great vid. In the market for this one
@WesternEquipment2 жыл бұрын
Thank you and thanks for watching!
@InspectorVol Жыл бұрын
I have one that will not spark. I’ve tested the new coil and new plug and it still won’t spark. I’ve bypassed the switch also and will not spark. Any suggestions?
@WesternEquipment Жыл бұрын
Is the spark plug gapped correctly?
@InspectorVol Жыл бұрын
@@WesternEquipment yes.
@InspectorVol Жыл бұрын
@@WesternEquipment yes
@moggridge14 жыл бұрын
Good, clear review and demo. Thank you! 👍😊
@WesternEquipment4 жыл бұрын
@Moggridge thanks for the feedback
@joseoneway50653 жыл бұрын
Thanks for the review, question is this unit shorter than the fs 91? I’m 5.9 so the echo 225 is perfect long enough but I want to switch
@WesternEquipment3 жыл бұрын
So the FS56RC-E measures about 69.5" and the FS91 measures about 73". This is the full length from back of the engine to the head. I hope this is helpful! Thanks for watching!
@harryerhart59783 жыл бұрын
Great video nice to see a professional sales person please move to Florida
@WesternEquipment3 жыл бұрын
We appreciate the great comment! If you have any question on parts or products give us a text or call at number in comments.
@tomfowler4296 Жыл бұрын
Do you have any videos on how to restring this model? Thanks!
@WesternEquipment Жыл бұрын
Yes, I have videos on restringing the heads on our other channel 247Parts.com.
@GPR333 жыл бұрын
You really did a great job ...Two thumbs up
@WesternEquipment3 жыл бұрын
Thank you and thanks for watching!
@perucabana2 жыл бұрын
Can i use 0.13 line for this trimmer? Please let me know
@WesternEquipment2 жыл бұрын
Unfortunately the head that come with this trimmer only accommodates up to .105 line. Good question and thanks for watching!
@codybialynski73032 жыл бұрын
Funny how the intro song is Adam Calhoun's song... 😎
@WesternEquipment2 жыл бұрын
Nice huh? Thanks for watching!
@frozenbanana4842 Жыл бұрын
Is it normal for this trimmer to vibrate alot at idle?
@WesternEquipment Жыл бұрын
This is hard to say. Is it just vibrating or is it trying to die?
@heyman53633 жыл бұрын
Do they make edging attachments for this trimmer?
@WesternEquipment3 жыл бұрын
You could by the edger head assembly and take off your trimmer assembly but as far as a specific edging attachment no. You can change the angle of the loop handle to make it easier to flip over for edging with you regular string trimmer head. I hope this helps and thanks for watching!
@dthundergunb31153 жыл бұрын
1does it come with a speed feed head or do I have to buy one?
@WesternEquipment3 жыл бұрын
Depends on what you mean by speed feed. It does have the bump head that will let line come out on the go by bumping it on the ground. Now as far as the fast loading head that would have to be a separate purchase. I hope this helps and thanks for watching!
@harrylee1985 Жыл бұрын
Thank you for this, very informative!
@WesternEquipment Жыл бұрын
You are welcome! Thanks for watching!
@estelaburciaga1772 жыл бұрын
Well explained I'm here watching videos I always buy gas weed eaters but I'm a single woman and never had problem to start engine but Im thinking to swish so corless because les maintenance but still not sure if someone has a cordless please let me know if it worth it the swish I had an electric one once and love it the only reason didn't buy again I didn't like had to deal with the court
@WesternEquipment2 жыл бұрын
Yes, there are multiple cordless options! Check out this video kzbin.info/www/bejne/i2KXnIWLec2inpI. This is one example and then there are many different sizes. Thanks for watching!
@nickonickster13 жыл бұрын
Can you pit a pole saw attatchment on this model?
@WesternEquipment3 жыл бұрын
Since this is a cable shaft, it is not recommended.
@leonkeating10153 жыл бұрын
Does it spin counter clockwise??
@WesternEquipment3 жыл бұрын
Yes, it does. Thanks for watching!
@h-townfishing13823 жыл бұрын
does there fs 38 &40 have the ability of different head attachments? or is it the 56 rc -e? just curious
@WesternEquipment3 жыл бұрын
You can add different heads to all of them but only certain models accommodate certain style heads. Did this answer your question? Thanks for watching!
@bryan-th3xf Жыл бұрын
hello so i recently bought the fs56rc and bought the stihil ultra HP oil , do i have to add that to the gas tank? the dealer i bought it from put gas but not sure if they put that oil in
@WesternEquipment Жыл бұрын
You need to mix that oil with your gas in the ratio that it says on the bottle. mix it up in your gas can and then keep that can separate for your weedeater. You only want to run that as/oil mixture in your weedeater or other 2-cycle engines.
@bryan-th3xf Жыл бұрын
thanks ! only problem is they left it like 50% full and dont know if they expect me to add my oil but i will ask the dealer and same goes for a stihl bg55 blower right planning on getting one aswell, is $140 a good price used or new better thanks