Triton ni memang betul2 cantik. Standard pun dah cantik. Semoga dapat mampu memilikinya satu hari nanti, amin.
@Annnnnnn4456 ай бұрын
Aamiin
@allymalleven52784 ай бұрын
🙏
@nontawatthadae82102 жыл бұрын
Thank you for choosing Thai brands.
@mursyidfathi12512 жыл бұрын
Thai brand is very good my car modified use brand from malaysia and thailand i very love thailand from malaysia
@caturlifelive2 жыл бұрын
@@mursyidfathi1251 Thailand brand is good especially for engine. But Malaysia brand also good too, i use malaysia brand for my vehicle suspension and really love it. Greetings from Bali
@jimbo40142 жыл бұрын
Aussie brands are best
@autobotheroeswm7932 жыл бұрын
Итог конечно красивый, ничего не скажешь. Но я заметил один единственный косяк. Сайлентблои верхних рычагов, стойки стабилизатора, и задние амортизаторы были затянуты на подъемнике, когда колеса и подвеска была в максимально вывешеном положении. Правильнее всего нужно опустить автомобиль на пол, покачать подвеску, и после этого затянуть все упомянутые узлы. В противном случае сайлентблоки будут работать с чрезмерным разрывом. Данную процедуру можно не делать, если вместо всех сайлентблоков будут установлены подшипники скольжения. Но это совсем другая история.
@sergey51852 жыл бұрын
правильное замечание )
@slavakpss3122 жыл бұрын
стойки стабилизатора и амортизаторы никак не влияют, части подвижные. рвать нечего!!!
@autobotheroeswm7932 жыл бұрын
@@slavakpss312 если вы имеете ввиду стойки стабилизатора шарнирного типа, то полностью согласен, положение подвески в момент затяжки не имеет значения. А вот что касается сайлентблоков, то данные детали, будь то амортизаторы, рычаги или стойки стабилизатора, которые имеют в конструкции сайлентблоки, затягиваются только тогда, когда узлы подвески заняли свое место на земле так сказать.
@slavakpss3122 жыл бұрын
@@autobotheroeswm793 затягиваются стабилизаторы и амортизаторы до ограничителя. Резинки подвижные остаются!!!
@autobotheroeswm7932 жыл бұрын
@@slavakpss312 я имел ввиду не бублики, которые одеваются на шток и затягиваются через шайбы гайкой. Я имел ввиду сайлентблоки с залитой металлической втулкой.
@sharpshooter69.2 жыл бұрын
Nice video...truskan upload video cmni bos..
@wfcentre50692 жыл бұрын
Tq support
@EdyAutoservice2 жыл бұрын
Modifikasinya keren banget bosku... Mantap
@seanalessi8762 жыл бұрын
At least you get repeat work when it tears the control arm bushes and lower strut bush because they were tightened without load on them
@jamiefrangos92332 жыл бұрын
And they tightened the wheel nuts in the incorrect order...🤣
@dodihsupriyadih92812 жыл бұрын
Salaam dari Indonesia.
@jojoemnasza25542 жыл бұрын
big boss mau lewat.
@PRL12902 жыл бұрын
5:51 you should flip the reservoir so the hose isn't near the exhaust. Good looking truck Mitsubishi should bring this to the USA.
@DionisBajrami2 жыл бұрын
theyre going to this year or next
@azrel11672 жыл бұрын
Tudia..smart betul
@firdausrahman69022 жыл бұрын
Upload more videos bos. Overall really nice work. Good job!
@ageudacruz55572 жыл бұрын
Sempre quando for aperta os parafusos de uma balança de suspensão ela tem que estar na posição horizontal como se o veículo estivesse normal no chão ,se apertar ela toda acionada pra baixo como no vídeo ou toda pra cima as buchas estoura Muito rápido e já tem q trocar denovo 😂😂
@WutongggKobangzx2 жыл бұрын
😱🥶😰
@rafaelmoreirabratfisch38132 жыл бұрын
Boa dica👍
@patrickcallou Жыл бұрын
Tem algumas coisas pra melhorar nessa instalação. Cortar parafusos com foi feito, além de não deixar fio de rosca (pelo menos 3), altera a estrutura do reticulado cristalino do aço, fragilizando o fio de rosca próximo ao corte. Usar aparafusadeira pneumática (2:57 do vídeo, percebe-se a porca também rodando junto em alguns momentos) não dá torque necessário e corre o risco de fragilizar a rosca do parafuso. Melhor usar a elétrica, pelo torque constante, sem o pico de pulso que a pneumática dá.
@khimsophacarfixing2 жыл бұрын
This is a good technique 👍!
@hafizhensem67182 жыл бұрын
Auto handsome pkai sportrim ni 😭😭😭😭 silau mata sekali pndang...mantap bro 👍🏻👍🏻👍🏻👍🏻
@bumbleyoh48022 жыл бұрын
Impact wrench sound is always satisfying ngl
@Жека-х2я5э2 жыл бұрын
Тот момент когда из чёткой тачки , сделали другую чёткую))
@Darius170902 жыл бұрын
That's my dream car
@m0f_2o2 жыл бұрын
من افضل البيك اب في العالم ❤️
@thatdude97012 жыл бұрын
If mitsu bring triton to the U. S. americans might be astonished to the super select 4wd system
@BWD81 Жыл бұрын
When u do lift body.. the engine also must follow lift up.. i'm form Borneo, here modification and upgrade body lift.. the engine also must lifted... we engineering the steering rack and rod steering.. others we installed ARB system and IronMan product.
@vunhoowchong4125 Жыл бұрын
May I know you from which part of borneo?
@khalidz13476 ай бұрын
Not true theres something called a drive shaft and is designed to go up and down to a certain degree
@ringocao53362 жыл бұрын
Top show
@mrCetus2 жыл бұрын
It really looks good, I would have gone with different rims, chrome isn't my thing.
@eccentric3632 жыл бұрын
looks nice for an on road vehicle. In Australia those big wheels with low profile side walls wouldn't suvive 5 minutes off road.
@回口回-u9f Жыл бұрын
LMAO...
@bp68378 ай бұрын
What country is this in?
@aliousene10962 жыл бұрын
Jolie travaille
@yusepngangon29662 жыл бұрын
mantappp
@adrieltan74852 жыл бұрын
5:14 follow star pattern to have an evenly tight lugnuts
@deTodowicho3773 Жыл бұрын
Regálame una 4x4 de tantas que tienes mi buen samaritano 🥺👑
@adhylp21712 жыл бұрын
Wooww amazing indonesia
@drmichael5941 Жыл бұрын
Nice one.
@jojiechannel16692 жыл бұрын
good job👍
@Taco198782 жыл бұрын
Good lord basic Mechanical skills not necessary I guess. No star pattern when tightening the lug nuts, or the U-bolt bracket.......I can probably go on for days but no need. Video speaks for it's self
19 лет работаю с ходовой частью. Ребят, кто вас так затягивать то учил?
@Алексейтестович-к6ч2 жыл бұрын
Пацаны подгоните по братски такой комплект, я вам. Видео скину отчёт об установке)))
@LVNITUPM82 жыл бұрын
Oh yeah love the rattle gun being used on suspension components instead of a torque wrench with the corrects torque specs.
@davew30142 жыл бұрын
Was thinking the same thing..I've fired people for that type of poor behavior..
@asyrafskmn42522 жыл бұрын
lol our mechanics be like "whats a torque wrench" 🤦♂
@LVNITUPM82 жыл бұрын
@@asyrafskmn4252 they aren't called mechanics then, they are cowboys that have no idea what they are doing and should be ashamed to call them self a mechanic
@that188guy2 жыл бұрын
that really bothered me also not tightening nuts in a cross pattern just going around really triggered me
@Bigsoot73932 жыл бұрын
Do enough and you know when is tight
@DNLVietNam2 жыл бұрын
Perfect
@angelicasantiago2597 Жыл бұрын
Ficou show 👏🏻👏🏻👏🏻👏🏻
@abramov2a2 жыл бұрын
Awesome
@albakreatif34672 жыл бұрын
Mantaaaaaaap 👍👍👍👍👍
@dedikurniawan26962 жыл бұрын
Triton tambang nih 😁
@hotrodmercury39412 жыл бұрын
I would love it if Mitsubishi brought the Raider back.
@javierhawit43882 жыл бұрын
oh hell no
@josephkhoshnow2 жыл бұрын
How many inches is it raised and what size tires used
@manamin78202 жыл бұрын
After change to profender..braking melekat..😆
@ricardoaraujo15442 жыл бұрын
Top top
@ВасилийПетров-ж2ж3т2 жыл бұрын
Наглядное пособие как делать не нужно!!
@diabolus2612 жыл бұрын
Вы про затяжку гайковёртом опоры стойки амортизатора?)
@hanoheioneill21862 жыл бұрын
I love uou Tai
@aaron38my2 жыл бұрын
Dang man...1 vital tool missing; torque wrench. Not every single nuts and bolts need pnematic.
@GOLMINER22 жыл бұрын
no torque wrenches were hurt in the making of this video lol
@dapurkecil95522 жыл бұрын
Torque wrench.... Pls 🙏
@The_Duct_Tape_Engineer2 жыл бұрын
Ugga dugga's are a genuine form of torque measurement, you dugga till the ugga's stop
@jasongardiner35482 жыл бұрын
Lol
@ratanaofficial6082 Жыл бұрын
Lol
@jameslaspinas2662 жыл бұрын
astig
@ravifebianata95402 жыл бұрын
Istimiwir
@АлександрСуттор2 жыл бұрын
Сайлентблоки нужно в загружнном положении затигивать. Огромный минус, специалистам по сборке такого классного комплекта.
@alexandrkorotkoff852 жыл бұрын
Динамометрический ключ, хроммолибденовые ударные головки, полтора-два витка резьбы из гайки должно торчать (это про обрезку стяжки рессор). И много другого. Походу ребятам дали ключи, инструкцию в виде комикса и вперёд. Я думал только в наших сервисах рукожопят, а оказывается это интернациональная практика.
@firdaustalukder33282 жыл бұрын
Bang pernah buat ranger tak
@mohdshamsaiman2 жыл бұрын
mantap!
@JulioMartinez-ov4wu2 жыл бұрын
Me gusto la suspensión donde la puedo conseguir?? Ojalá me puedan dar informes gracias quedo mu padre
@Itot1332 жыл бұрын
You can search profender malaysia
@TheKingDavid162 жыл бұрын
@@Itot133¿ de cuantas pulgadas es?
@meanmariboi2 жыл бұрын
That looks sick 😁🤙
@jamiefrangos92332 жыл бұрын
Good job, but at 5:20 nuts tightened in incorrect order.....🤣
@estebancabrera25812 жыл бұрын
Soy de chile en dolares cuanto sale todo ese cambio quedo de miedo muy bueno
@MuhammadIqbal-yy6oc Жыл бұрын
Wkwk sudah pasti kandas tuh ban depan ke bemper PD saat berbelok 😂
@romanhrynyshyn4246 Жыл бұрын
-dada, am I ugly? -very much!
@hakimov60072 жыл бұрын
Proper❤️
@tiagolunam2 жыл бұрын
Linda de mais 🤩🤩
@hanoheioneill21862 жыл бұрын
Jadoreeeee
@natanaeldejesus48802 жыл бұрын
perfeito
@sergiomiranda37802 жыл бұрын
Buen trabajo chicos 😃
@abzalmukhitov59542 жыл бұрын
Пикап моя мечта. Л 200 огонь 🔥 но дорого очень
@leonardoagundiz8622 жыл бұрын
Was he using a conventional socket to try and remove the leaf spring nut !?
@themechanicsingh41592 жыл бұрын
How can I order parts from Thailand to India man , they have good stuff.
@MarcoAntonio-ui6ni2 жыл бұрын
A picape dos caçadores de lendas
@francisdayun95854 ай бұрын
Mantap.... Lokasi kedài tu kat mana boss..
@Udorus12 жыл бұрын
Сб затягиваются на нагруженой подвеске, но никак не в нижней точке хода!
@РобертТер2 жыл бұрын
Какую резину поставили?
@nasosnasos80542 жыл бұрын
Price ?
@royerlisandrosaavedraramos8778 Жыл бұрын
Donde queda para aser unos retoques a una mitsubishi l200 triton 2022
@hanoheioneill21862 жыл бұрын
Dommage chez nous à Tahiti ils ne sont pas aussi compétent que vous
@clarenceapau2 жыл бұрын
berapa total kos nak buat triton macam nie?
@arywanawang30942 жыл бұрын
Boleh ke Profender ini dipasang pada Ford Ranger tahun 2009?
@ATTR_122 жыл бұрын
gilaaaa , kirain di eropa eh ternyata malaysia👍
@RighteousBastard51502 жыл бұрын
Very Nice
@zabiarjambak81892 жыл бұрын
Gut felek saya senang
@ezffrancost2 жыл бұрын
you should tighten it with the correct spec
@neff64772 жыл бұрын
2 ugga duggas
@sim60571382 жыл бұрын
@@neff6477 more like 20
@josemoya57682 жыл бұрын
Me gustó dónde la puedo consegir
@JOHNDOBRAPP2 жыл бұрын
show
@mohammadzaidahmadsaleh10982 жыл бұрын
Isuzu dmax nk bt pakai sport rim krom ni berape kos..berminat ni..kedai kat ne tu tuan
@wanderleymendonca82202 жыл бұрын
Vcs são foda
@shivadelon2306 Жыл бұрын
👍👍👍👌
@tsandinas.a.c.8840 Жыл бұрын
Que marca los amortiguadores
@scottcole14582 жыл бұрын
what size is the lift and what tyre size running after lift
@wanderleymendonca82202 жыл бұрын
Gostaria muito q vcs fissesem uma transformação na minha L200 triton 2010
@mongezi_rsa70012 жыл бұрын
Can I have the old wheels and tires pleeeeeeeease🙏🏾
@sergey51852 жыл бұрын
вот работа-лего собирать)
@sutrisnosutrisno31162 жыл бұрын
Bnyk daerah bangka belitung triton pick up
@alexl56202 жыл бұрын
Holy shttt, bad a..s if it was a truck/suv/car I would want my gf/wifey to have a truck/suv/car capable of getting out of a sticky situation mud/ clay/ sand/ muddy situation if I was not present. If you feel me that is what is up. I'm from AZ, USA
@ericcanyseus47292 жыл бұрын
heavy duty ada ke bos
@seanazlan7795 Жыл бұрын
triton 2008 bole modi macam tu tak? berapa budget
@raimor98512 жыл бұрын
You must torque the nuts and bolts when the truck sits on the ground!