Thanks for the video ! Do you think for a 195 of your kits the blow off valve is mandatory ? Or is it good without it?
@steviestowe49424 жыл бұрын
Thanks for the video. My question, what would happen if you set the crack pressure too high?
@whalensspeed4 жыл бұрын
Too high of crack pressure typically can cause an overboost code. Easily addressable.
@JohnWSRD4 жыл бұрын
Ecu would catch the boost and use the boost controller to acheive the target. Essentially not a big deal within reason.
@michaelr17603 жыл бұрын
@@JohnWSRD so if you drop down in fuel e85 to 95 octane when u change your ecu to lower boost to run 95 technically you don't need to drop your wastegate from 11 to 9 lbs?
@miller440x2 жыл бұрын
Just to confirm, setting crack pressure your using pressure not vacuum?
@whalensspeed2 жыл бұрын
Yes you're using pressure.
@terrystotzheim971911 ай бұрын
Is it normal to hear a constant air leak at idle on my 2023 X3 DS Max? It was quiet at idle before then one time I started it I heard the air exhausting out. Dealer says its normal. Its the 135 hp base model. Thanks!
@whalensspeed11 ай бұрын
Air meaning exhaust coming out of the v-band clamp of the turbocharger? There is suppose to be a metal "v-band" gasket there. It shouldn't be leaking though.
@terrystotzheim971911 ай бұрын
I can't feel air coming out of anything, and you know hot fast everything gets hot. I was wondering if it was coming out of the wastegate? If anything it sounds like it's coming from the exhaust.@@whalensspeed
@zipracing97383 ай бұрын
Hi i wanna know when the wastegate crack ...is the pressure continue rise à little to open it full??? Or it fully stop generate pressure ??
@whalensspeed3 ай бұрын
As soon as the wastegate rod moves outward, opening the wastegate flapper. That's what we measure what PSI that is "cracks" at. The wastegate when pressurizing the wastegate itself will sometimes look like its pushing the rod out. But, we don't consider that proper. It's when the rod itself actually moves.
@blakegalyon1748 Жыл бұрын
What’s the crack pressure for ws160?
@whalensspeed Жыл бұрын
6 PSI.
@2Mjr0022 жыл бұрын
Would a waste gate cause overboost ?
@whalensspeed2 жыл бұрын
If its not opening correctly, weak or compromised (binding) spring. It will cause improper boost control. Leading to that, sure.
@jasonwieber27627 ай бұрын
Whats the device called that you are using to measure the psi?
@whalensspeed7 ай бұрын
Mityvac
@rick3446 Жыл бұрын
Is your waste actuator out yet I'm not seeing it on your website. Thanks