What Are We Doing With This 37 Chevy??

[@kevinching1975]

Congratulations to Chad and Paul for winning the Onx off road challenge

[@chadsfab]

Thank you!

[@geneheck]

Thanks for thinking of us vets Stacie. Seeing good people like you living a free good life made it all worth it.

[@chadsfab]

Thank you! We certainly wouldn't be here without you and your fellow service men and women ❤️💙 It's greatly appreciated!

[@grandmtnman]

best mom in the world! non judgemental, encouraging, etc... but she knows what would have make all this go more smoothly and let the boys figure it out. again.... best mom ever!

[@joannejohnson8971]

It is an Honor to have served. Thank you for your gratitude and unwavering support. Thanks for all the great videos.

[@TheGrizz1717]

No, thank you for your service.

[@chadsfab]

Thank you again for your service! For the sacrifice you and your family made to do so.

[@dougalexander7204]

To our veterans…. Well done and thank you. Congratulations to Chad and Paul on the challenge build. You made a fine overlander. Lastly, much respect to the sons.

[@tyendor1952]

I still haven't figured out why they didn't just winch it off the trailer ... hook the front axle and redirect with a snatch block on the rear off the trailer ... after the front was at the rear they could have just pulled out from under it or used the boom to lift the front and pulled the trailer out with another truck.

[@jballenger9240]

I would think others lessons to be learned and taught by less experienced, younger folks, working together and under no pressure to go faster. Ah youth, leisure, love and respect.

[@terrancegrant5573]

Gotta remember chads crew isn't a recovery crew so that wouldn't be instinct to them

[@tyendor1952]

@@terrancegrant5573 Yes, good point ... and course you're 100% correct ... they're all very good at what they do and now that they have Griz up and working they will figure it out I'm sure.

[@pat8988]

Where could they anchor the snatch block?

[@tyendor1952]

@@pat8988 They could have anchored to either the tie down points or the stake pockets both of which can be seen at 08:01 in the video.

[@shaneharrison4775]

Thanks happy to have done my part to keep my homeland safe

[@chadsfab]

Thank you! Your service is greatly appreciated!

[@shaneharrison4775]

@chadsfab my district pleasure to serve my nation.

[@peterwild9459]

wellllllllllll...that was painful LOL

[@chadsfab]

😂🤣😂

[@patrickjesse719]

sorry I'm abit late..Thanks to fellow vets and to Chad's Fab, awesome channel

[@auroralance8546]

Congratulations on your win with Paul. You all made a very capable vehicle.

[@Mar.wanJaniol]

Can't wait for your next upload!

[@becauseihaveto2001]

I'm sure there is a joke somewhere on how many of Chad's son's does it take to move one old truck!!! good job guys.

[@chadsfab]

🤣😂 Goofing off at it's finest

[@johnperun232]

To Funny You Boys need some lessons in running with your Dads Awesome Truck / Wrecker Thanx for sharing your Great Work and lack of experience Have a Great Day 👍 God Bless You and your Family Say a Prayers for All The US Veterans 🙏

[@mrebou]

There’s a winch and a the D ring on the trailer didn’t even need a tow truck. Can’t wait to see these three go out and do a recovery. That’s going to be some good TV.

[@tyendor1952]

Yeah, sending this crew out on a recovery will be like when Paul sent Jace and Josh out with the Dakota to rescue the 4x4 van. kzbin.info/www/bejne/rqPCooOgoad-eKcsi=dpxMkLl-jKngBqzJ

[@tyendor1952]

Yeah, sending this crew out on a recovery will be like when Paul sent Jace and Josh out with the Dakota to rescue the 4x4 van. kzbin.info/www/bejne/rqPCooOgoad-eKcsi=MSiQYjMegv-1aKrY

[@keithfrazier2558]

🤣🤣🤣🤣I kept watching and just shaking my head. They're brilliant when it comes to wiring and stuff but they didn't have a lick of common sense when putting this in that spot. Hopefully they learn from it for the future. They need to make themselves some wheel dolls or get some Go Jack's for stuff like this.

[@chadsfab]

They were totally goofing off and like some said figuring out what the wrecker was capable of doing. They know they could have unloaded the truck in a few minutes with the winch that is built on to the trailer, dragged it off, etc. but where's is the fun in that? This was simply a learning exercise with them trying new things.😉 But it might be really good TV when we do do a recovery too 😂😂

[@RonSales]

A set of repo dollies under the front tires would have been a good idea.

[@kenc1800]

Boys … ALWAYS listen to your Mama ! She has gotten you this far.

[@MacsSpecialitiesMotorsports]

Cool to see Griz in action!

[@FredieFarmer60]

👍🏽🇺🇸👍🏽 boys were on the struggle bus.. way to over come

[@robertcarnaz4326]

Love how you guys work together… I’m one of 11 all male family, except Mom of course… and on OUR BEST day we could NEVER be so positive and productive. I have physical scars from fighting some of my older brothers lol…

[@chadsfab]

😂🤣 Like you they've certainly had their moments over the years.

[@madrew2003]

Clearly, pulling the shackle out of the protective sleeve was a mistake. lol. Nice of older brother NOT to call you out on it. haha

[@chadsfab]

It's actually designed to pull that shackle out so you can inspect it, but if you get one I wouldn't recommend pulling it completely out.. quite the pain to get it back in 🙄🤣

[@jeffhill2089]

I think if Chad had been there he might have backed the trailer in the spot and put a snatch box on the back of the trailer and used the winch to put it in place. Long as the job got done is what counts and maybe learned a little for next time.

[@kevinfoley7704]

Good video. Thank you for your support for the veterans. Most people make those statements without having a single family member being a veteran or having any intention of ever pushing their children to serve their country.

[@chadsfab]

That might be true, but I hope they still fully understand the sacrifices made by those that served and their families.

[@katreniaclark]

Wow, Thats to work harder and not smarter.

[@chadsfab]

Simply a learning exercise with them trying new things and having fun with the wrecker 😉

[@skyepilotte11]

Come on people.. this was a learning experience . Success at the end... Congrats Chad and Fabrats for taking the ONX win...

[@beaverc2884]

They got it in there. It wasn't pretty, but it's in there. Nobody went to the hospital, the shop is still standing, the house didn't catch fire. So I would say that's a win for the boys. 👏👏👏👏👏👏👍👍

[@aaronmcconnell7358]

Remember people Chad was away and they wanted to play with griz, this was a learning experience for them.

[@chadsfab]

Exactly! 😁

[@p.e.8149]

Here's a suggestion that has worked for me in the past on car trailers a two-pulley or one system to remove dead one's off the trailer once you have it in the location. Here goes the one pulley, mount a D- ring on the center of the entry of the trailer as an anchor point to which you can use a shackle and snatch block to do a down and back to winch end of the vehicle you want off the trailer to pull it off and then drive out from under. Wahla, job done all by one person and limited equipment/tools. You pulled it on now pull it off.😎

[@geriattrick]

with your talents and abilitys you should design and build car dollys with all turain wheels

[@danapatterson9460]

Congratulations on onX win .

[@CintiaJigs]

Been subscribed to your channel for a while, love it!

[@sleepyseven]

Brothers team work you have got to love it. YM planning in action.

[@rickydonahue1586]

The best way to learn how to do something is to figure it out for yourself in my opinion. These young men did a great job! 😁👍

[@russellhardin6446]

That’s the best comment I’ve seen on this thread! Thank you for being so supportive.

[@rickydonahue1586]

@russellhardin6446 Thank You sir.

[@clintonsmith9931]

It’s all about the show!

[@kimberlyvaughan3430]

Good job guys. 😊 it’s never as easy as it looks, is it.😊 God Bless Y’all 😊

[@robbietrujillo3650]

Im sorry but this was brutal to watch! lol Chalk this one up as a learning experience. I love your videos. Love all the Chevys in the background. My dad has a 72 Cheyenne, K10,short bed, fleet side. Original Tuxedo Black with the 4 speed manual. My bro has a few c10's and k5's, were a Chevy family as well!

[@danwebber9494]

One of the best looking trucks ever. I have one in my garage.

[@chadsfab]

That's awesome! What year and color is yours?

[@danwebber9494]

@@chadsfab it’s my “old white guy project”. Gotta have a never-going-to-be-finished hot rod project!

[@Frippa212]

A tip for next time. Put a plastic tray under the front wheels 👍😃

[@bryduhbikeguy]

Yes.Nice 'sleds' over the loose gravel would've saved allot of time.

[@chadsfab]

They were totally goofing off and figuring out what the wrecker was capable of doing. 😉

[@marvincarter870]

1st Place with the Rat Pack that's awesome Chad and Paul! It's ok because Stacey is on the ball at Chad's Fabs. The boys got the old '37 truck off the trailer and into it's new parking spot. Tough job moving the old girl with only one wheel rolling but the got er done! Good video! Thanks for the Veterans's Day wished!

[@michaeltablet8577]

Excellent video! Can't wait to see that truck become something awesome like all of your builds!

[@poppie1414]

Just take it in the shop. Let’s get started

[@budrohammbone2806]

Maybe draw up a design for a 'Gravel Lot Dolly'. Order replacement wheels/axles for 'offroad jack', angle iron stock and build it. (Solid Works on PC ?)

[@timsutterby9899]

Man that wore me out!

[@garychaiken808]

Great job guys. Thank you 😊

[@Kickinpony66]

I know a guy who stretched one of those and crammed a GMC V-12 in it! I got to meet him at the Goodguys Carshow in Des Moines, Iowa this year.

[@Freedbird]

Wow ! Just wow. I was breathless with anticipation when I realized you were not going to back the trailer in and utilize the rear D rings to winch that off the trailer.

[@Ryan_Tidwell]

Stacy!!! Onx video hasn't dropped. Way to spoil the ending!

[@chadsfab]

It was all over Instagram and announced at SEMA 😉 Sorry if I spoiled it for you though.

[@robertupchurch9639]

A set of tow Dollies, two big jack stands. Place the dollies under one end, hook up and put it where it belongs, lift it high enough to place the jack stands under the frame rails toward the dollies, lower the winch to allow the vehicle to pivot off the dollies,raise it up high enough to remove the jack stands…. 😎

[@chadsfab]

I think they were just making everything KZbin hard and having some fun in the process.😂

[@edber29]

Nice tribute to Veterans!

[@kimberlyvaughan3430]

On a note, if is a very powerful word. It’s even in the middle of Life😊

[@johntimm7265]

Chad, your boys did a great job. And learned a lot.

[@chadsfab]

Sometimes doing things the hard way is a good way to learn 😁🤣

[@dudleybaggerman9574]

Nov. 20th watched the on X thing , Chad YOU ARE A FIRST CLASS PERSON 👍👍 "Remember" life is sometime's hard when u got to deal with a Narcissist , but you made it and showed All Wat a First Class Person you are 👍👍👍👍 Now back to work on Your Own Stuff !!!!

[@TheOldaz1]

Love Chads Fab, but you guys sure made a task getting that '37 in there.

[@JamesSageSR]

Good job, you thought about each step and made it happen on your own. A lot of negative about how you did it but we all had to learn how by making mistakes.

[@ramjam720]

The hand throttle you are referring to is called a VernierThrottle. The prices vary depending on the cable length. Of course with the electronic engine controls today, you probably want an electronic vernier throttle.

[@HazzyME]

Visit with Matt’s off road and pop the cover to his one for all remote. Can’t be too complicated that way. The engineering has all been done

[@billsrq1788]

Boys will be Boys 😂 Americans number 1 wholesome family. Girls this is the type of men you need to be looking at ! Hello from Siesta Key Florida

[@professorfalken4600]

I’m sure that was worth an entire video. Almost like watching Matt’s off road recovery when Matt is on vacation 😂 even the Bishop is shaking his head in disbelief.

[@chadsfab]

😂🤣

[@NorrisAnderson-hn4xn]

That was interesting watching all of you do some troubleshooting to accomplish the task of moving that vehicle into the position you wanted it to be in with limited tools and equipment.

[@oldnavy1969]

Tow dolly would help you could build one. I would watch you do that. Love watching you show. Keep up the good stuff

[@frankhage1734]

The encroachment of neighborhoods around Chad's property is incredible. He should approach the HOA's and get them to plant and irrigate 2 rows of conifer trees along their fence lines.

[@Forbye4]

Fun video guys!

[@joshpitsch8570]

The boys did a great job with this video while chad is gone helping paul

[@craiglabell]

Congrats team!

[@jensenmekk]

That 37 chevy will be an epic short bed pickup with an matching bed with wide fenders.....and with an Cummings BT6 and smokestack behind the cabin

[@PaulNason-u8x]

moving trucks around Cut down mobile home axel Weld 6inch c channel on top. Clamp to frame front or rear Makes moving frame with locked up wheels easier to move

[@franksmith9954]

It's great to see the boys out working hard, hopefully leaning some smarter way in the end, lol. I am not sure if there's enough function, but maybe you could reperpus a knuckle crane controller for griz

[@chadsfab]

Sometimes doing things the hard way is a good way to learn 😁🤣

[@paulelston791]

I'm diggin thr LRE & Chalenger in the background ❤

[@brianboys9015]

Cool video girls and boys

[@drlivingstonusa1]

Thank you to the Carter Family for your support to the Veterans and their families. 👀

[@papatomsthoughts]

You can get hand throttles at almost any equipment parts store, or big truck parts store, I am guessing. Still used on other things. 😊😊😊😊 good job boys.

[@highcountrystories]

You can use a manual choke cable or even a lawn mower manual throttle cable.. though it has to be setup correctly..

[@randallparker8477]

I did the thumbs up on this one but it was sooo painful to watch. Thanks for supporting Vets!

[@fleurdelune5240]

Listen to your mother! ❤

[@rvbjr]

It seems like the winch cable on the trailer could have been run through a snatch ring at the ramp and back to the front axle to pull it off. Advice from the back seat driver! 😀

[@chadsfab]

Agreed! They were just wanting to play with the wrecker and see all of what they could do. Sometimes doing things the hard way is a good way to learn 😁

[@bradleymadosh911]

The younger Brothers are smarter then the older brother 😂

[@chadsfab]

😂🤣😂 I think they complement each other.

[@MikeWillis-sp6vj]

I hope you’re going to do something really cool with that old truck

[@Tanks-Link]

Now what I would've done is hooked up to that trailer that was made out out of the pickup bed drug it out of the way is it has tires on it back the trailer up right where it needed to be without the ramps hooked up the truck to the back of the truck on the trailer and have him drive out from under it Until the back was sat down hooked up to the front lift it up and finish pulling the trailer out. But of course this comes with experience the boys will get there they're amazing young men.

[@RMonkey]

How about some kind of plastic slides? Tow truck drivers use them, and they definitely work.

[@JustaGrumpyOleMan]

I know it's to late now, but if I had of been unloading that truck, when you guys lifted it and drug it back on the trailer. I would have stopped when the rear wheels would touch the ground. Then I would have put jack stands under the frame. Backed in into the spot , use the badlands jack to jack it up and remove the jackstands setting the rear wheels on the ground and pulled forward dragging it out far enough to set the ramps and then pulled on forward until it was all the way off the trailer and ramps. Picked up and cleaned up my tools and called it done. Now you know a better way for next time and when you decide to put it in the shop you can do that then too.

[@Bumblebee4788]

Use steel Cookie sheets under the front wheels Next Time👍

[@user-bh7dm8dr3m]

Love you guys

[@wayneullman5079]

This is when a set of dolly wheels would come in handy. Next project is to make a pair 😊of

[@rickdespain5363]

Those wheels are missing the lock ring, real "widow makers" split in the middle of the rim like a bagel, that's why the are dangerous you can't tell if the two halves hooked together or not. Moved lots of dead vehicles with a front end loader or tractor with a bucket, don't need anybody to steer them just steer the tractor with one end of the vehicle off the ground .

[@JoeFilardi]

Hi Chad good episode

[@dougdean3134]

Nice job guys

[@thomasr4378]

Thanks for the quality content and your time 😮

[@danieljameson8000]

Lodar are the easiest controls to integrate. Not cheap but super reliable.

[@Bobtidbury]

Why didnt you use a snatch block on the rear axle and run your winch cable under neath from it to the front axle and pull it off the trailer .

[@chadsfab]

They were totally goofing off and figuring out what the wrecker was capable of doing. They know they could have unloaded the truck in a few minutes with the winch that is built on to the trailer, but what is the fun in that? This was simply a learning exercise trying new things.😉

[@jonnyk9496]

Install one of those premier power welders, you’ll have a throttle control and a welder right beside your controls?

[@javman03]

I knew he was going to regret pulling the rope out of that protector sleeve immediately!

[@chadsfab]

😂😂😂 Something you have to learn things the hard way

[@walkingwithdogs8547]

Yes just use a adrunone board and program as needed then make a housing with toggles.

[@curtischarley4595]

Donating I guess., 😎...

[@lyilsperry4428]

I'm not sure why you didn't back the truck in the slot on the rubber tires that were on the back. But you know entertainment none the less.

[@bryduhbikeguy]

Passenger side brake is frozen with rust and won't roll. Same as the front drums.

[@patrickb5656]

Those do look like train wheels! Have you seen Merrlin@MerlinsOldSchoolGarage take his model A on the railroad tracks up to an old coal mine! Great video. And lots of laughs, of course. Anything with Merlin in it has comedy, lol. More often than not, by mistakes.

[@kevinevans6810]

hammering brake drums sometimes helps them break free and what the uy said down below winch it off

[@willsmitherman688]

While the cats are away the mice will play. Glad y'all got some seat time in the wrecker y'all keep it up and dad will have y'all running 911 calls and cleaning up wrecks off the roadway

[@hoss1003]

Hey guys.. You should have backed the truck and trailer into the space where you wanted to park the pickup and hooked a strap up to that tree and the pickup frame. Then pulled the trailer out from under it.. You would have been done in 10 minutes..

[@chadsfab]

I think they just wanted to have some fun and play with the wrecker! 😂

[@cfs176]

Remember...The more boom you have out, the less it can lift

[@HenryBeavers]

Look at the crane remote on that service truck in the back ground . They have a multi function remote

[@mortneff4674]

Time for a short flat bed dolly that would have made moving that Truck a lot easier! Much like a short hay wagon but no tounge and 2 tires that turn as ya move the other end of the truck.

[@MichaelRobbins-t4s]

Name this episode ‘ The Blind Leading the Blind’ 🤣