Chippewa Valley Technical College (CVTC)-Welding Program uses "METALSUPERMARKETS" KZbin videos for teaching the welding students and fab-specialists using pipe welding standards. A Big Thanks to your organization. On Wisconsin-go Badgers & Packers! Respectfully; T J (Tom) Vanderloop, AWS & LSME & Manufacturing Instructor as CVTC
@mikestevens80125 жыл бұрын
He mentioned to say go Packers go Badgers , respectfully , ..isn't there a psi relationship 40 psi an 80 psi ? Say home use and light industrail , a restaurant perhaps needing thicker ,
@MrGwelding3 жыл бұрын
is there a testable relationship between gauges x ID x OD - like a formula/ equation? Or do you just measure and verify with a chart like you did in the video all the time? Thanks
@Phailful4 жыл бұрын
Thank you, very clear explanation!
@faisalkim47394 жыл бұрын
No.1 explanation
@kiekie75724 жыл бұрын
Very interesting. Didn't know this until now. Thanks
@davidsingfield70695 жыл бұрын
If ur smoking this is funny
@homefront31626 жыл бұрын
I love all ur videos!!! Many questions answered
@sergioson20014 жыл бұрын
Yes. I have a pipe scheduled appointment.
@chuckybaby19736 жыл бұрын
Now I understand, thank you.
@tonyklymson8096 Жыл бұрын
Great thanx
@moustafafarouk1196 жыл бұрын
So in the end , what is the suitable kind of steel to build a Harley motorcycle frame?
@homefront31626 жыл бұрын
moustafa farouk PVC pipe is ok because Harley’s are gay
@chaist945 жыл бұрын
4130
@davidgrover59965 жыл бұрын
moustafa farouk, Be an original and use way pricey and difficult to work with 316 stainless or you could go with the 4130 Christopher Haist suggests.
@phorewhoresman18975 жыл бұрын
Pipe schedules are for laying pipe each day with a different hot girl and not getting in trouble.
@themessenger64424 жыл бұрын
Lmao!!!! 🤣😂👍
@nadeemrajput43367 жыл бұрын
it's gr8
@ksdewisupin37427 жыл бұрын
” 竹月弓月 Nadeem Rajput sssss1qqa
@ksdewisupin37427 жыл бұрын
竹土竹
@ksdewisupin37427 жыл бұрын
’’’尸難、 5燦了事項鏈球土戈
@bhoran1152 Жыл бұрын
The O.D. must exceed the I.D. Or the outside would be on the inside.
@nattyboom44444 жыл бұрын
This guy loves the pipe
@bannedtwice7767 Жыл бұрын
Pipes would be late constantly without a set schedule....
@jasonkrohn54164 жыл бұрын
Ya this guy isn’t reading a teleprompter. 😂
@kingcobra17436 жыл бұрын
Plzzz send me this schedule chart...
@ItsVideos7 ай бұрын
Why are you staring at my left shoulder?
@magicman93215 жыл бұрын
Pipes are very busy and have schedules also 😂
@blcouch5 жыл бұрын
Schedule 40= can get everything done in a 40 hour work week Schedule 80= 40 hours of overtime needed to fix everything wrong with the Schedule 80 work.
@wyattbrule126885 жыл бұрын
if the O.D. is 1.050, and the wall thickness is .113, where the hell does 3/4" come from? lol what moron cam up with this system? is there somewhere to shove your caliper on that pipe to find 3/4"?? The ID would be .824 - which is NOT 3/4. try explaining that one in your next video.
@jonathanchark52914 жыл бұрын
The inside diameter of common black steel pipe in nominally sized( nominal meaning in name only), so it's typically going to be slightly oversized for a given measurement.
@jonathanchark52914 жыл бұрын
You can, however, get seamless steel tubing that is made to much more exactly dimensions.
@MrJohnnydublin6 жыл бұрын
Why can’t the states use metric.they metrisise the inch into a hindered parts for guns and pipe.the money is in hundreds why can’t they just change it??.i notice the military use it sometimes like the us army snipers use meters in movies iv seen
@scottyj62265 жыл бұрын
why can't they just say 1" diameter pipe with a wall thickness of .10"? is that too fu@king simple for you?
@joemorrow84114 жыл бұрын
I really had a pipe schedule when my wife wanted to get pregnant😲🤣😅🤣😅🤣 I couldn't pass this up
@tigerbatman78814 жыл бұрын
Joe Morrow grow up you old bag
@joemorrow84114 жыл бұрын
@@tigerbatman7881 get a sense of humor soy boy
@tigerbatman78814 жыл бұрын
Joe Morrow piss off you tard gard
@tonymella1004 жыл бұрын
This video is pointless, I watched it anyways.
@tommywatterson5276 Жыл бұрын
Wall thickness I think
@michaeldanielallen4 жыл бұрын
This literally explains nothing. Larger number means thicker wall. Great everyone knows that. How about making a 6 minute video instead of a 2 and a fucking half minute video so you can further explain details that people actually have questions about instead of just saying “look at a pipe schedule chart to get information.” 1. Where did the term “Schedule” come from? 2. You said schedule can tell you information about the temperature rating. Well what the fuck is that information? 3. Is this the same for PVC? ABS? Stainless steel? Iron? 4. What is the largest size schedule you can buy? 5. What is the smallest schedule? 6. What joining methods are typical of schedule tubing?
Welded for a crook named Jason Jackson out of central FL, JJ is a scam artist,heard he lost his business tho. Couldn't of happen to a nicer guy, thats the shit that'll happen when you don't pay your debts....has nothing to do with this video just the presenter has the same common name lol
@samueltaylor49894 жыл бұрын
It’s the exact opposite for pvc pipe, go figure.....
@PacoOtis6 жыл бұрын
Thanks!!! Very well presented!
@carpballet Жыл бұрын
“Tape measure” Lol Sing songy and head bob lol
@dougdouglas36964 жыл бұрын
Thank you. Informative and easy to understand. Good video
@kennypool Жыл бұрын
My wife and I are measuring pipe differently.
@nickv1855 жыл бұрын
But what about sch80. Or sch160, or that cheap sprinkler pipe sch20...how come the inside diameter changes by sch. So sch 40 is bigger inside than sch80 which is 3/4?
@luderickwong4 жыл бұрын
Thanks for the info, it explain “how” but......why? Why those numbers are so odd? No matter you are talking imperial or metric, it is still 3 digit behind decimal, you still need a chart for reference. This is where the mystery is....😏
@WalkerKlondyke Жыл бұрын
Why on earth is the nominal size nowhere close to the actual OD?? Are metric pipe sizes this ridiculous?
@andrewalexander9492 Жыл бұрын
Pipe sizes are nominal inside diaameter. Of course the inside diamters are going to vary with the wall thickness ( schedule) On most nominal pipe sizes Schedule 80 is going to have an inside diameter cosest to the nominal size. ie: the inside diameter of 3/4” inch, schedule 80 pipe is pretty close to .750”. Schedule 40 pipe is a lot more common, and generally the inside diameter of schedule 40 pipe is larger than the nominal size. It’s worth noting that pipe sixes are different than tube sizes. Tube sizes are based on outside diameter.
@ItsVideos7 ай бұрын
You are correct. It is ridiculous and it didn't have to be this way. The origin of the mess comes from plumbers, not scientists or engineers.
@backlash003 жыл бұрын
It means you're scheduled to get it today but, Ha Ha, it's not comming.
@LaserrSharp4 жыл бұрын
I'd like to construct some stall bars (aka Swedish ladder). What pipe do you recommend? I want to hang my punching bar on it too? I'm new to all this. Thanks!
@xjd83753 жыл бұрын
🤦🏻♂️
@bigbrown11724 жыл бұрын
Wat the formula dummy to figure out the schedule. Or u don't no
@braylan775 жыл бұрын
Or I could just screen shot the one you showed and whala; I have a conversion chart! Btw thanks!
@camgumby15 жыл бұрын
Its spelled "voila"
@braylan775 жыл бұрын
Yeah that’s for all you politically, grammatically correct snowflakes.... I’m from the country and WHALA there ya go!!!
@braylan775 жыл бұрын
Cam G And one more thing, before you correct someone for their un-intentional misspellings... make sure your grammar is correct... ( its ) is supposed to be ( It’s )!!!!!! Whala there ya go!
@andrewbarlow89375 жыл бұрын
Thank you sir for the tutorial. Good video.
@elimarc3891 Жыл бұрын
Thank you
@williamsawesome4 жыл бұрын
The thumbnail for this video looks like a gun nuts peeing contest chart
@mrbuck50594 жыл бұрын
Schedule 80 for them antennas up top. Overkill.
@nicholasr794 жыл бұрын
Does this guy think he's talking to complete idiots?
@mateenzhombarkar91253 жыл бұрын
What is pipe schedule chart above 12"?
@israelisatrannyfreakshow95655 жыл бұрын
I need some help. I'm confused. If the nominal i.e. inside diameter is 1 inch, and the outside diameter is 1.315 inches, how can there be different wall thicknesses? Because if the wall thickness changes, then either the inside diameter or the outside diameter will have to change as well. In other words, you can't have two different pipes, one with a wall thickness of 0.133 and another with a wall thickness of 0.179, and still have the same inside diameter and outside diameter for both pipes. In fact, if you have a pipe with an inside diameter of 1 inch and an outside diameter of 1.315 inches, there is only ONE possible wall thickness. And that is .1575 inches. Or the outside diameter minus the inside diameter, with the result divided by 2. Maybe I'm just missing something. But I'm working on a project and I really need to figure out how this works lol. Thank you for helping me out with this question. I really appreciate it. Cheers!
@gh42114 жыл бұрын
Nominal Diameter is just what it's called an the actual OD will be different all the way to 12" pipe which is 12.75" OD. 2" pipe (2.375 OD) 3" pipe (3.5 OD) 5" pipe (5.562 OD) 9" pipe (9.625 OD) etc. 14" and up the OD is the same as the NPS, this is confusing at first, OD will always be the same but ID will change based on wall thickness or schedule. Just take your actual OD minus wall thickness, minus wall thickness again and that is your true ID. 12.75 x .375 Pipe has a 12" ID... Now this gets more confusing as this only applies to PIPE not mechanical tubing, DOM, Hot Rolled, Cold Rolled, HSS Tubing... Whatever the size is there the actual OD is the same. Get yourself a pipe chart an it'll make it alot easier at first. If you need more info or help shoot me a message I can send you pipe charts, weights, tubing charts, weights anything you'll need I deal with pipe, steel, tubing, casing, plate, all day everyday so it's not a biggie.
@georgeburdine56606 жыл бұрын
Remember peeps, there is a difference between pipe and tubing.
@nickkickball23224 жыл бұрын
Did u really have to poke that bear? Let the games begin!! Pipe is determined by INSIDE diameter whereas tubing is always determined by OUTSIDE diameter... ..those are from the notes I've gotten
@eng.omareyadaljorani99546 жыл бұрын
Please how can I get about pipe schedules and weight?
@kennethmelnychuk97374 жыл бұрын
Pipe ID is measured up to 12 inches
@Srk70282 жыл бұрын
plz give the link of chart
@nickcardona90245 жыл бұрын
I guarantee that caliper did read 0.113
@JesseTorres3055 жыл бұрын
I lay a lot of pipe! 🤣
@joshua70155 жыл бұрын
haha
@thomasmeadows2565 жыл бұрын
what about for high tunnels
@walterlavigne43514 жыл бұрын
Wall thickness
@dv76852 жыл бұрын
Nice
@markd61545 жыл бұрын
Nhqaaaaa
@michaelmellon455 жыл бұрын
Very interesting.
@vcreateluxury97075 жыл бұрын
Brilliant
@motivationformuslims12145 жыл бұрын
thank you for this information
@c12320135 жыл бұрын
Thanks, help me a lot!
@tjvanderloop16864 жыл бұрын
All design engineers & welding technologists need a handle on the "Pipe-Schedule Charts" use to select shapes and sizes for pipe & tube applications with a caliper-measurement. Thanks Again as I support your educational training. Tom Vanderloop, Author & Consultant
@garyroberts44957 жыл бұрын
Iu
@yanceypatterson96676 жыл бұрын
Why do y'all drive on the wrong side of the road???
@yanceypatterson96676 жыл бұрын
@Dingus E. Dow oh it must be a metric thing...
@davidgrover59965 жыл бұрын
To annoy the King Yancey Patterson.
@zeus-mt7wx6 жыл бұрын
Glad utube sent me this.
@victorcano87626 жыл бұрын
The thickness in the pipe helllo!!
@de050910 ай бұрын
Why do you put the whole beak into the pipe to measure wall thickness? Two flat surfaces clamping down on a curved plate wont result in good measurements. You gotta use the ends where its like two wedges.