WHAT HAPPENED TO MY 4TH GEN CUMMINS??....WE BACK!

[@GStreat]

Never clicked on a video so fast!!! Welcome back!!!!

[@tobyhunt4281]

Shit i did too!!

[@EVERYTHANGDIESEL]

Thank you!

[@dkbug22]

Welcome back from deployment sir. Thank you for your service. Looking forward to seeing the motor cleaned up and being put together!!

[@EVERYTHANGDIESEL]

Thank you! It's good to be back. Motor will be coming along!

[@nathanurick8320]

Finally we back👍 first of all THANK YOU FOR YOUR SERVICE💪 can’t wait to watch this build.

[@EVERYTHANGDIESEL]

Thank you so much, means a lot!

[@user-wo2zc6ie7c]

glad to see you are alive and doing well thank you for your service. definitely missed the videos. once you re assemble I recommend pressure lubing the engine to get oil all through the engine before start up should be able to find a cheap pump to rent or buy. take your time you can never be too clean with these jobs. other than all that i would do exactly what your doing id be curious to see the oil filter cut open.

[@Steadierpark]

Idk how far u are from him (he’s in CA too) but Josh from Horsetorques Diesel could be a sick collab. I’d be sick to my stomach bro, but u got this.

[@JIH_III]

Without a doubt !!!

[@DavidBrown-jt7yi]

Go look at Dave's auto center videos and check out the speed of air pistons. Would be cool to see that in your build.

[@EVERYTHANGDIESEL]

I know about them, that's some quality engineering 👌🏾

[@Nathang2233]

@@EVERYTHANGDIESELit’s not proven i don’t buy the hype.. also they never post dyno testing in them

[@Domino8619]

Good to see you back bruh! Looking forward to future videos on your build.

[@joemartinez95]

Welcome back and Thanks for your service!!! I grew up in Military Housing in LV thru the early 80’s when my father retired from the Navy.

[@linusbarloonii237]

Welcome back!!! Thanks for your service to our great nation!

[@EVERYTHANGDIESEL]

Appreciate you, thanks for watching!

[@iqbalsaini541]

Man glad to see your back , and doing all the work. I did the exact same thing as you are. I had blown hg , did the full tear down, found #6 cyclinder had pitting . Dropped everything off to machine shop that did the head work for me. I got them to assemble short block for me. I did the rest my self and went with xotic head stud after watching your video. I did upgrade the head i got it ported and valve spring the push rods.

[@justinstjules8735]

Welcome back! Love from Canada 🇨🇦 Thank you for your service from ur northern neighbors

[@chadcox9296]

Glad your back! Glad to see your keeping the 3500. Welcome back.

[@EVERYTHANGDIESEL]

Appreciate you man!!

[@TheIncredibleHoosier]

@@EVERYTHANGDIESEL you should sell it and get a 5th gen dually.

[@wurstcrewchief2798]

Welcome back man! Thank you for your service!!!! Missed you and the truck!

[@TheIncredibleHoosier]

Welcome back buddy! 🇺🇸

[@alanbagel2204]

Thanks for your service 🇺🇸 Glad to see you back

[@EVERYTHANGDIESEL]

Thank you! Appreciate it

[@Antiliblife187]

I’m stoked you are keeping your 4th gen! I was worried you were gonna go to the dark side and get a powerjoke. Thank you for your service and welcome back brother 🇺🇸💨 I can’t wait for what’s to come on your rebuild.

[@joelotto1252]

Welcome back to San Diego. While the engine is out of the truck I would get the Fleece Performance Coolant Bypass so you don’t have heat issues with 5 & 6th cylinder

[@Ignaciowitda6.7]

Dude I’m glad your back bro I started my channel because of the third gen😩

[@Balakay9435]

Hell Yeah Brother 🇺🇸🦅

[@EVERYTHANGDIESEL]

💯✊🏾

[@pggrasshopper]

Yo yooo letsss gooo. Was wondering where ya been.. glad diddy didn't get ya!! Lol

[@JerryandJack]

Welcome back . Don’t forget the nitrous kit .

[@Halffast719]

Fire ring that engine. I built a 6.7 on my channel for the same reason. Spun a rod bearing. All in with everything Mahle which is what Cummins uses. I think you’ll be into it with that cam about $7200. I was all in $5800 without cam and head studs 5 years ago and I had a good engine block but crank had to be reworked a little. I’ll be watching to see final cost. Keep them videos cummins.

[@michaellashway3362]

Glad your back thank you for your service I commend any serviceman but I am in the same boat as you my 08 I bought and I didn't even make it to make the first payment on it and spun a rod bearing seized it and then snapped the rod I believe I haven't gotten into it yet but I will be rebuilding it myself and will be following you along this journey already answering questions for me

[@brianp5579]

Do not use oem rods...if you upgrade anything do rods!!!!! unless you want another window in the block

[@EVERYTHANGDIESEL]

Trying to plan it into the budget

[@johnharrison-r5b]

ant no way boyyyyyyyy we back

[@jessethigpen3157]

Finally your back!

[@EVERYTHANGDIESEL]

Yessir!

[@CodyCopeland-ew9lf]

Damn so glad to see ya back

[@Justin_megacab]

Been waiting seems like for ever man glad to see you back bub

[@herculesinwyoming]

i dont know how i missed this for 2 days 😮, great update and it looks like your plan is on the right track, new parts are definitely cheap insurance for an expensive engine. im looking forward to the future videos. also glad to see you home safe.

[@aidanfarnworth999]

missed you brotha , ecstatic you’re keeping the truck .

[@dylanhaseloff8296]

Awesome! Now I can watch actual Cummins content again!!

[@chrisgillard7355]

Been thinking about you often brother. I second the other post, never clicked on a video so fast 😅 was so excited to see the post! Welcome home and thank you for your service 🇺🇸

[@Breacherwoody]

Glad to see your back bro. Love the content and can’t wait to see the build. Semper Fi

[@Freight_train_6.7]

Welcome back! Made 825/1117 with that cam with trans slipping like crazy and not turned up yet just put head back on and strapped to the rollers. You will like it spools my 472 crazy fast

[@RickySlatton]

Welcome back!!! Thank you for your service bro. 🇺🇸❤️

[@gslife1]

Welcome back brother, ty for your service. I’m in SD if you need a hand hollar at me man.

[@MyTubeUser321]

If you are looking to maximize towing performance, look into the DPS Turbonator for your S468…you can also fit it with an exhaust brake if needed

[@jodypenney404]

Wagler Street Fighter Rods... Not needed per say but will be ready for upgrades for the future.

[@kennyb1451]

Good to see your back brother🤙

[@EVERYTHANGDIESEL]

Thanks brother, glad to be back!

[@gsc512]

You Gap the Piston ring wider because if that piston's getting hotter that ring is going to expand more than the other one so it still seals. It's just it expands more so you don't want it expanding to where it's hitting each other and then warping against the cylinder as it'll cut grooves in your cylinder and you'll ultimately lose power to destroy the motor and you'll start burning oil Which is true of any turbo motor people. Add turbos to factory motors all the time and they never go back in and Gap the piston rings and so the piston rings are gapped too small for the turbo application which generates substantially more heat. The failure points to piston ring it'll either snap or it'll expand and start warping almost and scrape the shit out of the cylinder wall😅

[@TheProchargedmopar]

I installed Xotics on my 6.7 because of your video and recommendations.. Couple yrs ago. Still holding great.

[@East_Jerome]

I did also still getting mine together

[@EVERYTHANGDIESEL]

There awesome studs for a good price. Arp die hards will say differently

[@filabila]

BROO ive been thinking about you and the dodge lately glad to see you back.

[@johnnybags87]

WELCOME BACK BROTHER!

[@East_Jerome]

Glad to see you back keep the content coming

[@grudgeaddict6002]

Welcome back bro!

[@EVERYTHANGDIESEL]

Appreciate it bro!

[@bobbycakes]

Cam , i saw the big red & thought it was an old video! haha! then it said 12 hours! Glad your back! prayers went out for you & your family! figured you went out on deploy. Glad your back . sounds like a new rowdy ripper! NC brother !

[@SOHN32]

Depending on your shipping from Canda. You might be waiting a bit .Got a message as Nov 29 the postal service is on strike in Canda.

[@chris24v]

Finally bro!!!! Missed you ! 🎉

[@rayzielonka7856]

Good to have you back. Looking forward to more great content.

[@EVERYTHANGDIESEL]

Thanks, man, I'm glad to be back, too!

[@raymondsmith5777]

Welcome back bro

[@petersannicolas8949]

Yes thank goodness bro I’m glad you’re going to keep it nice to see you back

[@EVERYTHANGDIESEL]

Thanks dude, I missed this thing!!

[@petersannicolas8949]

@ Yes and I’m glad you’re back and can’t wait for more vids and most of all Thank you so much for your service 🇺🇸🇺🇸

[@jeffreyyeater1780]

Welcome back ! Have a great Christmas !!

[@EVERYTHANGDIESEL]

Thanks! Merry Christmas to you too!

[@domcummins4148]

Glad to see you man!!

[@EVERYTHANGDIESEL]

Appreciate it man!

[@TheKlamminator]

Finally, been waiting on an update

[@ShaKYGT]

Just discovering the channel and I look forward to seeing the build and where it goes but look into Speed of Air pistons. They’re becoming more and more popular for good reason. This is the perfect build for them in my opinion. The increased efficiency of these pistons will pay for the whole build if you put enough miles on it over time.

[@EVERYTHANGDIESEL]

I was looking into there pistons. Definitely worth getting

[@adamjohnson8884]

Glad you’re back! What Cummins manual did you end up with? I need a good manual for mine too

[@Nathang2233]

Should have got some street fighters

[@jodypenney404]

Look into Speed of Air Pistons and doing a gapless 2nd ring

[@packingbone1953]

Yooo!! Welcome back dude.

[@EVERYTHANGDIESEL]

Appreciate you man!!

[@tobyscott42]

Thank you for your service

[@jd_portland]

Welcome back my guy!!🇺🇸🇺🇸🇺🇸

[@EVERYTHANGDIESEL]

Appreciate it!

[@KE7HOP760]

Welcome back!

[@EVERYTHANGDIESEL]

Thank you!

[@lokaboricua89]

You have to add what the shop is charging to build the lower end. You are already around 10k

[@1noremak74]

Glad to see your home safe.

[@EVERYTHANGDIESEL]

Thank you!

[@maliknolan5711]

MY BOI I BEEN WAITING FOR An UPDATE

[@EVERYTHANGDIESEL]

I'm back now lol

[@CalebChambers-x7p]

Make sure they clean out all the galleys as well

[@tellthetruth9649]

Welcome back! Let’s get to work.

[@agoodfellarad]

Glad to see you back man. Looking forward to seeing more content, I've learned a lot from your old videos. I totaled my 3500 5.9 and just took the payout, and bought a 2014 6.7 2500. If I had more time and money, I would be going the same route as you. If you have any 6.7 bolt on parts you wanna get rid of, please message me.

[@EVERYTHANGDIESEL]

Appreciate it man. If I got any parts for sale I'll definitely reach out out.

[@DanPark68]

I know facts company’s issue refund on cores partially depending on what’s damaged.

[@Rusty-Shackleford69]

Welcome back, brother!🇺🇸✌️

[@EVERYTHANGDIESEL]

Thank you!

[@strokin17]

He back!

[@williamgamble6731]

Welcome come back bro

[@Tony-tk4ht]

yooo my guy i was literally watching your videos yesterday.

[@EVERYTHANGDIESEL]

Appreciate you watching!

[@ToddHefer-m3s]

Thank you for your service. May God Bless you in Jesus Christ Name Amen. I live in Northern California

[@markgreen4731]

Have you priced having your head ported and polished and flow tested on the intake and exhaust side? That is the biggest choke point on a 6.7 Cummins.

[@code10garage94]

Looking forward to the new build👍🏽…Aloha🤙🏽

[@bryanmoultrie2454]

❤🎉welcome back Brother 🎉Awesome video

[@DirectCurrent4u]

Ebay Rods = good content!👍

[@EVERYTHANGDIESEL]

Hell yeahh, they're purchased through ebay not actual ebay rods lol. They're pulled from a cummins

[@eddiezerance8139]

Welcome back 🇺🇸

[@EVERYTHANGDIESEL]

Thank you

[@eddiezerance8139]

@ how’s the mirrors holding up you installed ? I have the same year truck as you Laramie was thinking about doing the same you

[@rogerjohnson378]

Missed you man

[@EVERYTHANGDIESEL]

Appreciate it bro!

[@jsav5845]

Welcome back man 👊 if all that shit is gonna b out then do the fleece coolant reroute. Keep that #6 much cooler. Easier to do outside the vehicle. Should just drop that shit off at Greg A's place and do a channel collab.

[@EVERYTHANGDIESEL]

It's definitely part of the plan!! I just forgot to mention it.

[@Tony-tk4ht]

im looking to getting a 2008 ram 3500 single wheel mega cab and been and watching your vids has helped me close that decision

[@EVERYTHANGDIESEL]

Thats awesome man! Glad the vids help!

[@markgreen4731]

Are you going to have the shop tig weld your cam gear and crank gear?

[@tsimmons1974ts]

Can't wait bro

[@DPats1228]

Wassup wassup bro. I’m back in that Cummins life! 07 mega 6 speed ARP head studs Compounds Injectors I believe 🤘

[@josephvanderdoes9813]

Run speed of air pistons they will drop EGT plus give you very good performance

[@JoseRamos-ob8ci]

While you are there just do the rods like some wagler rods?

[@tallgeeseheavy5311]

Lemme get that transmotion

[@andresgboa3749]

How did you blow the motor &how many miles on it?

[@scottsierra3994]

I need some help finding a clean set of laramie hub covers for a 2018 3500

[@SpreadinButter]

Got my xotic studs honestly a nicer kit than arp I have on my 3rd gen. running 60 psi on them no issues.

[@EVERYTHANGDIESEL]

Big facts! I love xotic studs

[@JoseRamos-ob8ci]

I have missing you!

[@korn111685]

Cool. Was wondering if you kept or sold that truck.

[@EVERYTHANGDIESEL]

It's back, I'm not selling this one lol

[@JoseRamos-ob8ci]

I have a third gen 5.9 what’s is a good drop in turbo ???

[@jacojanks5985]

Hit up Josh McCormick at horsetorque. He is back in cali. Would be a cool Calab. May give a discount for rebuild short block.

[@SpreadinButter]

Ceramic coated pistons are worth the little bit of extra price.

[@EVERYTHANGDIESEL]

I'm definitely looking into ceramic coating them.

[@maxpain7197]

Hey devil dog. I guess i missed it but how did the motor blow? Make me nervous on my 6.7. Anyway Semper Fi. Always frosty.

[@maxpain7197]

Nevermind, guess you think it was a lube problem. Kinda weird.. Thought you ran high quality oil. Amsoil

[@lyndonhamby7432]

When turbo fails. Stop driving immediately 😂👍🏻

[@gavinwhittaker2983]

Wooooooo lesgoo

[@dillonboettcher5635]

I’ll ship you some used good rods

[@spumaticcarz]

Good info !

[@EVERYTHANGDIESEL]

Thanks bro!