What I learned street tuning my freshly cammed, LS swapped C10 | with Walker Tuned

[@chrisjones469]

That's a decent build. I went a different direction. I have a '78 C10 with a 632 big block from Blueprint. I bought the Builder's Series with the built 4L80E trans. The reason was partly because I like the sound of a big block, and partly because everyone does the LS swap, and I wanted something apart from the crowd. It makes 829.5 hp and 810 ft-lbs of torque on motor. I also have a Currie 9" w/True Trac locker, 4.11 gear, and 35 spline axles. It has QA1 all around w/double adjustable shocks. The brakes are Wilwood all the way.

[@UNITEDBYTRUCKS]

Sounds like an awesome truck!

[@LSX_GORILLA]

Well dam man that’s badass 🇺🇸🦅

[@QueenCitySpeedShop]

Thanks for the shoutout Robbie. We are defiantly gonna use some of the new UBT cams in some builds soon.

[@UNITEDBYTRUCKS]

Man, that would be awesome! Just let me know.

[@sscottphillips1973]

Alex out here taking us to HP academy!, love it

[@UNITEDBYTRUCKS]

It was a great learning experience!

[@sscottphillips1973]

@UNITEDBYTRUCKS i used HP tuners on my truck and you got to have some knowledge to get it right. Teddy sounds so awesome as well.

[@cody_mize3221]

There's more talent and knowledge in that 2 acres of shop bays than the rest of the state of GA, between QCS, Alex Walker, Tim Wallace and all the other guys that rent around that place

[@UNITEDBYTRUCKS]

No doubt about it!

[@henryg683]

Robbie Teddy is sounding amazing and I can’t wait to go on the road trip with him and see all the people going Gaga when he’s passing them by!!!! I love this truck!!!

[@UNITEDBYTRUCKS]

Haha he sure does! Thanks for watching Henry!

[@richardpugh3434]

Teddy does sound healthy. Should be a blast to drive.

[@UNITEDBYTRUCKS]

It sure does and really is!

[@doug81337]

That cam, converter & tune solidly put extra hair on 'Ol Teddy's chest! Tough, tough sounding setup!

[@UNITEDBYTRUCKS]

100%

[@bazilwreckerloughead]

Teddy has just the *right* amount of chop!

[@UNITEDBYTRUCKS]

I think so too!

[@mikeypolk9440]

I’m loving this cam I can’t wait to see the road trip video and see about the MPG This could be a contender for my 5.3 swapped 85 suburban

[@UNITEDBYTRUCKS]

I think you’ll be pleasantly surprised!

[@GucciRuntz]

Love this channel! Keep it going Robbie 💪🏾💪🏾💯

[@UNITEDBYTRUCKS]

Thanks for watching, I will!

[@frankm8533]

Man I wish Alex was closer. Have a friend swapped his 80 dually 6.0 4l80 all brand new stuff. Nobody can get it right in 3 1/2 years just sits in the garage runs and drives kinda but cuts out pops falls on its face won't start. Think it's been to 5-6 shops that supposedly tune LS stuff no luck fixing it

[@UNITEDBYTRUCKS]

Oh man! Alex’s greatest skill in my opinion is tracking my down gremlins. It helps that he really understands wiring.

[@walkerperformance7626]

@frankm8533 let me know if I can help! It’s a shame to do all of that work and let it sit.

[@SIMPLE.C10]

Good info!

[@UNITEDBYTRUCKS]

Appreciate you watching!

[@MidnightCustoms-C20]

Love the channel. I've been watching for about a year. I love what you do with your trucks, and I've learned alot. I am working on a 71' C20 gonna lower it, put some much better suspension on it. Im keeping it 3/4 ton. Been doing lots of research amd sourcing parts and kits to put it together how I want it. Since there isn't a lot offered for the heavier running gear.

[@UNITEDBYTRUCKS]

Thanks for watching and for the kind words!

[@toddclark332]

Great job Robby sounds 👌

[@UNITEDBYTRUCKS]

Appreciate it!

[@plutomfjonez5007]

Sure is nice to see Theodore 👀 it's been a while looking sweet that tune is killer mane 😮yessa

[@UNITEDBYTRUCKS]

He’s my favorite

[@JohneeB]

Sounds great Robbie! You said Borla XS Pro with what size pipe?

[@UNITEDBYTRUCKS]

Yes sir! 2.5” duals with Hooker Blackheart LS manifolds

[@HeyPap1967]

Sweet !!!!!!

[@UNITEDBYTRUCKS]

Yes sir!

[@jakelords24]

I flip all my throttle screws to access them from the top. Much easier!

[@UNITEDBYTRUCKS]

I like that idea!

[@Oleblueburban]

??Question, does that TPS reset procedure work like that on a Holley sniper? I have that issue sometimes with TPS going to 1-2 then tap the throttle and goes to 0. Very intermittent issue

[@walkerperformance7626]

@Oleblueburban, the sniper units automatically reset to absolute zero when you shut the vehicle off. If you’re having problems with calibrating, I would try getting your IAC counts to under 10% at hot idle and shutting it off. Should be good to go after that.

[@MayoNaize87]

WOOOOO

[@UNITEDBYTRUCKS]

😂😂😂

[@mikebryant1524]

WHAT STALL U USE IN CONVERTER

[@UNITEDBYTRUCKS]

2800-3000 Circle D Converter - it’s listed on my website unitedbytrucks.com

[@arturobeckett4452]

💯🔥🤘🏼

[@dre_foun10]

I might like the white wheels better

[@UNITEDBYTRUCKS]

I get it! I like it all sorts of ways

[@aftermathwhite4955]

No way ! They didn't match nothing.

[@bryankendrick3422]

Would I be able to use this came in my 6.0 LQ4?

[@UNITEDBYTRUCKS]

Absolutely, I will be running this set-up in my LQ4 build for another ‘68 c10

[@pedrofernando176]

🤙🔝

[@Mike30650]

Who built your trans?

[@UNITEDBYTRUCKS]

Trans has never been built while in my possession. We added a trans cooler and have changed the gasket but it’s still stock. Alex seems to think it does have a shift kit in it, but I bought engine and trans bolted together and never even broke apart until we added the Circle D converter recently.

[@bigjohn_68C10]

Teddy sounds nasty! Love that crop! I've got to know, what exhaust/mufflers are you running?

[@UNITEDBYTRUCKS]

Thank you! They are Borla ProXS mufflers and Hooker Blackheart LS manifolds. I love the sound too.

[@bigjohn_68C10]

❤​@@UNITEDBYTRUCKS

[@gthomas5880]

​@UNITEDBYTRUCKS truck sounds great. I'm running same manifolds love the sound with those Pro XS. Is the drone real bad?

[@statenmorgan962]

What does he charge to tune a truck?

[@UNITEDBYTRUCKS]

Reach out to him and tell him what you’re looking for. [e-mail]

[@aftermathwhite4955]

Paint the back bumper the same color as the rims, give it that murder look at this point the back bumper is sticking out like a sore thumb.

[@UNITEDBYTRUCKS]

Haha those are factory matching patina bumpers. Think I’ll keep them as they are on this old base model ‘68

[@aftermathwhite4955]

@UNITEDBYTRUCKS I can dig what u are saying but it would be killer, don't get me wrong I love Teddy I've seen him come a long way, and every time I give u some advice u say thanks but no thanks and a year or so later you do it, so I'll just seat back and wait. 😂

[@arturobeckett4452]

💯🔥🤘🏼

[@UNITEDBYTRUCKS]

Thanks for watching!