What is a Boundary Layer - Laminar and Turbulent boundary layers explained

  Рет қаралды 68,378

AirShaper

AirShaper

Күн бұрын

Пікірлер
@lukecaetano8405
@lukecaetano8405 3 жыл бұрын
Im posting this to help me learn: Boundary layer- The area between the flow in contact with the object (here no slip is applied so u = 0 at surface) and the flow that is not affected by the viscous forces of the Object (free stream velocity). Thanks for great explanation!
@AirShaper
@AirShaper 3 жыл бұрын
Indeed Luke! Keep in mind that that definition is useful for a flat plate, but more difficult for the flow around a 3D object (where most of the flow is actually "disturbed", also outside of the boundary layer).
@MeirbhinOConaill
@MeirbhinOConaill 3 жыл бұрын
The last point on induced turbulence to move the separation location is very interesting. Down a rabbit hole of athlete tape I go… Thanks for posting these videos, complex topics fantastically explained
@AirShaper
@AirShaper 3 жыл бұрын
Thanks a lot! For more info on the shin tape, check our blog on the Olympics: airshaper.com/blog/aerodynamics-at-the-olympics
@MeirbhinOConaill
@MeirbhinOConaill 3 жыл бұрын
@@AirShaper fantastic thanks for sharing. The air blades by Nike are incredible, mini vortex generators ha
@beingentrepreneur9458
@beingentrepreneur9458 2 жыл бұрын
Was struggling to understand this concept ... but now its Fluid... thanks !!!
@AirShaper
@AirShaper 2 жыл бұрын
Thank you very much Vivek, I'm glad our video helped!
@kalpeshwani8520
@kalpeshwani8520 2 жыл бұрын
It's laminar .... smooth...
@berkekus7053
@berkekus7053 Жыл бұрын
Is the reasoning behind dimples about the increase in length L of the surface which increases the Reynolds number? Or is it more about how these dimples somehow cause irregularities in the flow and make the boundary layer turbulant?
@wakaspatel8405
@wakaspatel8405 3 жыл бұрын
Is there sound issue?
@AirShaper
@AirShaper 3 жыл бұрын
Hi Wakas, Yes, next time I'll increase the gain for the recording! For now, turn up the volume if you can 🙂
@DC.
@DC. 2 жыл бұрын
Thank you sir!
@AirShaper
@AirShaper 2 жыл бұрын
You're welcome!
@veyrondarren1064
@veyrondarren1064 3 жыл бұрын
Awesome. Thanks
@AirShaper
@AirShaper 3 жыл бұрын
Thanks Veyron!
@mhrmidbencher
@mhrmidbencher Жыл бұрын
Thanks a lot.
@vlatkopopovski2685
@vlatkopopovski2685 2 жыл бұрын
The authors have two wrong scientific approaches: researching the creation of Lift force and Low pressure at upper side of the wing, relative to the ground surface and Earth. I explain the aerodynamic cavitation and existence of Lee side aerocavern, and creation of Aerodynamic force. Low pressure creates force normal to the cord (contact surface), and it name is "aerodynamic force" because is made from the air (aero) in motion (dynamic), or wind relative to the wing (object).
@toonzman3
@toonzman3 2 жыл бұрын
TQ .buy . increase volume Can't hear ...
@melvindavis3629
@melvindavis3629 Жыл бұрын
"when you work on a subject long enough you will become god like and i saw a god in boundary layer subject today" . thank you i have a mid term on Monday
@jenniferjohnson9827
@jenniferjohnson9827 Жыл бұрын
audio is not good... I have max volume on my pc and on youtube and can barely hear
@AirShaper
@AirShaper Жыл бұрын
Yes, that's correct, we've increased the volume on more recent videos!
@bravocharlie639
@bravocharlie639 Жыл бұрын
A bit oo quiet. My volume was on maimum but I old not hear it whilst steps away.
@AirShaper
@AirShaper Жыл бұрын
You are right! We've improved this on more recent videos
@deepaksivakumar651
@deepaksivakumar651 3 жыл бұрын
Please hire me as your intern
@AirShaper
@AirShaper 3 жыл бұрын
Hi Deepak, we don't have any open positions at the moment. Once we do, we'll post them at airshaper.com/jobs
@1510sharmaji
@1510sharmaji 9 күн бұрын
Bhai hindi ma padha laa english to book ma likhi hai
@nimo945
@nimo945 8 ай бұрын
I cant understand it .
Flow Separation - Boundary layer separation explained
4:08
AirShaper
Рет қаралды 60 М.
Understanding Laminar and Turbulent Flow
14:59
The Efficient Engineer
Рет қаралды 1 МЛН
Aside: Boundary Layer Separation
15:11
learnfluidmechanics
Рет қаралды 73 М.
Understanding Aerodynamic Drag
16:43
The Efficient Engineer
Рет қаралды 998 М.
Inside the V3 Nazi Super Gun
19:52
Blue Paw Print
Рет қаралды 2,7 МЛН
Fundamentals of Aerodynamics . Introduction . The Boundary Layer
14:03
Turbulent Flow is MORE Awesome Than Laminar Flow
18:32
Veritasium
Рет қаралды 10 МЛН
10. Fundamentals of Boundary Layers
24:25
Barry Belmont
Рет қаралды 150 М.
Doug McLean | Common Misconceptions in Aerodynamics
48:26
Michigan Engineering
Рет қаралды 740 М.