A brief overview about how digital valve controllers, or smart positioners, function and can benefit your process.
Пікірлер: 27
@kokinkokecruz44764 жыл бұрын
You are so good explaining
@Manos-de-Piedra2 жыл бұрын
I taught him
@josemanuelalogoadjomo78635 ай бұрын
wonderful video, just wondering whether there is a complete course on positioners offered by EMERSON and if there's who can I apply to??
@shashankgamanagatti9659 ай бұрын
It's a great enhancement of IoT connectivity to valve sector 👏.
@maurosotelo5509Ай бұрын
Hola señor como esta? La verdad que es una excelnte explicacion!! Disculpe la molestia hay algun curso para hacer de valvulas posicionadores me podria dar infornacion xfavor entre a la pagina donde dise curso pero no me deja entrar
@Practical.instrumentation7 ай бұрын
I'm facing issue with this type of positioner After calibration out put from positioner is not stable Valve begin hunting No solution is available
@syedaslam28566 жыл бұрын
hi would some one clear my doubt as this DVC is a two wire controller how does the feed back of valve position to DCS and input from DCS works
@ramavelbala16 жыл бұрын
Feedback of the valve position to DCS is through communication protocol used. Either HART or Fieldbus communication. One is 2 way superimposed 4-20mA signal and latter is 2 way digital signal .
@145236ish4 жыл бұрын
Hello, Can you please explain, if a Double Type relay will work with a single acting actuator. Are there any settings?
@FisherControlValve4 жыл бұрын
Relay A may be used with both Double Acting and Single Acting DVC6200 digital valve controllers. When using relay A as single acting there is an adjustment wheel in the relay that must be set by using a screwdriver. Rotate the wheel adjustment in the upward direction or negative adjustment indicated by the sticker on the front of the relay until the adjustment stops. This will set the Relay up to only operate using output A from the device. More information can be found in the DVC6200 instruction manual www.emerson.com/documents/automation/instruction-manual-fieldvue-dvc6200-hw2-digital-valve-controller-en-123052.pdf
@joseluisjarana3 жыл бұрын
Tengo un problema a la hora de autocalibrar que en los porcentajes no son estables,oscila el posicionador.La alimentación correcta y todo correcto,como lo corrijo.
@randomfellow62452 жыл бұрын
does a DVC adjust pressure output to cover for actuator springs that are too stiff? for instance a 2" 10-30 that is only getting 1.5" 10-30, will the DVC ensure it puts 40lbs to the actuator to get that extra 1/2" of travel?
@FisherControlValve2 жыл бұрын
The DVC will continue to adjust output pressure until one of the following takes place: - Travel measured by feedback matches the desired set point - Maximum supply pressure is reached or - Zero output pressure is reached So it will compensate, but that will be limited by supply. However, if you find yourself tempted to continue to up the supply pressure we'd suggest reaching out to your local Emerson sales office to troubleshoot the root cause.
@85giby5 жыл бұрын
One of our dvc6200 f in LOcal override mode..how can I change to Cascade mode?
@FisherControlValve5 жыл бұрын
Hello, Please reach out to your Emerson sales contact on this topic. If you need help finding them please use: www.emerson.com/en-us/contact-us
@kokinkokecruz44764 жыл бұрын
Excellent
@shaguftasayyed80194 жыл бұрын
Asl How one pair wire work analog output and analog output Question is if I am in junction box measure mA of valve if dcs send 8 mA and feedback is 12 mA what my Multimeter will show in JB I am confused how one pair wire work both AO and AI
@MilitantPrepping4 жыл бұрын
I believe your Multimeter will show the 8mA signal from DCS, you will need something like a 475 to see both input and feedback
@MilitantPrepping4 жыл бұрын
Hart is able to transmit input and feedback signal at the same time using slightly differing sine waves, it's also able to send ditigal hart signal along with analog signal at the same time over a single pair. Bell 202 + Analog signal
@mohammadsalah54822 жыл бұрын
Please make video of relay I/P
@brunomoralesflorentino96812 жыл бұрын
Este posicionador si se daña la bobina tienes que cambiar todo el posicionador contrario al 0osionador análogo
@belaybekele26252 жыл бұрын
wow amanjing
@israrullah47794 жыл бұрын
Sir how to join your class room, please assist, i am very much fond to seek sir plz any whatsapp or other link that i may avail
@FisherControlValve4 жыл бұрын
Hello Israr, Please visit www.emerson.com/en-us/automation/services-consulting/educational-services to help find training in your area.