WHAT IS A DOWNSTREAM OR UPSTREAM KEYER AND HOW DO YOU USE THEM WITH THE ATEM SWITCHERS

[@gransloss]

What you are doing is worth more than gold. Thank you Ajay. ❤️

[@AJaytheCEO]

My pleasure 😊

[@xicoamc]

Bro this video was really great to give me a clear understanding of Upstream and downstream. You are a great teacher. Thank you!

[@Gredurman]

Very helpful, just starting out so these sort of tips are very helpful and save lots of time researching. Thank you!

[@AJaytheCEO]

Glad it was helpful!

[@shaffersrawlings1685]

Thanks Ajay, I was one of those that asked for this video. I am much less confused by it now. I now have an idea of how this works and what to use the DSK for vs the Upstream keyer.

[@AJaytheCEO]

Happy to help

[@magrum21]

I’m getting ready to change our in house video and streaming setup to an Atem 1 m/e based platform, and having never used BlackMagic gear or much video to begin with...this has been incredibly helpful. I really appreciate you showing what these various tools actually DO. Thank you for the effort you put into making this! New subscriber here!

[@AJaytheCEO]

Awesome. You are welcome and glad it helped you

[@theampedlife]

Very helpful thank you!

[@AJaytheCEO]

Glad it was helpful!

[@Editor1206]

Good morning AJay. This is why preparation and planning for going live is so crucial for the pre-production. It can take up lots of time, so my advice would be to try to get everything set maybe a day before anyone goes live or put it out on social media.

[@MediaMarktMoscow]

Dear AJAy - thanks a lot for your video - could you please explain how to use DSK and USK at the same time - as I want to show lyrics and logo from 2 different sources

[@AJaytheCEO]

USK for greenscreen with DSK placing a lower third over that

[@JonVanNevel]

@@AJaytheCEO Hi AJay- Could you do a tutorial on the steps on how to do that? I've got a small studio setup with Reflecmedia Chromatte Chromakey. I know how to get my key set, but haven't found where I can simultaneously run my chromakey set (upstream) at the same time as my CG's on the downstream. I've done a lot of searching and can't find anywhere that shows how to do this. The only way I can see how to do this is by feeding my ATEM into OBS and having OBS run my CG's over the top. A little clunky- and I'd like to do it all in the ATEM if possible. Keep up the great work!

[@AJaytheCEO]

@@JonVanNevel I'll try to do something once I get back in town

[@JonVanNevel]

@@AJaytheCEO Great, thanks. Safe travels!

[@MrTerryRay1]

AJ do you have a video that explains how to display a video lower 3rd?

[@AJaytheCEO]

Yes I do

[@DeeStans]

Great info AJ! Thank youuuuuu!

[@AJaytheCEO]

Thanks

[@flyboyking]

When using the preview box to select your masking colour you can actually sww the box and the image on the multiview preview window

[@bates4333]

great information, you showed the downstream but I needed to find out how to add my company logo that is a jpg to the ATEM Mini Pro then make it part of the downstream to always show.

[@DivineLightProductions]

Hello, AJay! Thanks for sharing this! Is there a way on the mini or extreme to use a stinger transition..?

[@AJaytheCEO]

Yes they can

[@南灣中華浸信會-粵語]

Hi AJ, thanks for the instruction. Any way to use the physical Key button on the ATEM mini pro for turning on and off lyrics?

[@AJaytheCEO]

Not possible

[@南灣中華浸信會-粵語]

@@AJaytheCEO thanks. :(

[@techguyjon]

Can you explain how to program the other "key" buttons?

[@AJaytheCEO]

Which button in particular? The buttons on the atem are hardcoded so they can't be directly programed

[@techguyjon]

@@AJaytheCEO in the software it has key 1 and next to that key 2 key 3 ect are grayed out.

[@AJaytheCEO]

They are grayed out because those are for the larger switchers

[@obulorolisa]

Thanx bro

[@AJaytheCEO]

No problem

[@stoochy1]

This was great. It’s closer and closer to achieving what I need for our church. Let me explain. We have an atem extreme. In house we want to take up full screen. On the live stream we want lower thirds. We use a chroma key and keep it on all service. The problem is if we run a video and forget to change the video feed either any green will get cut out or a bit green screen appears on the feed. Our camera switcher (1-4) is usually a child so I don’t want them to mess about with pressing the right buttons I’m using Faith Proclaim as software. How can I best send lower thirds to my stream and also an alpha channel out to my atem? My brain isn’t comprehending how to accomplish this. I thought about buying a deck link duo but this video gave me hope that I might be able to accomplish my goal. Please help. Thanks. From a church planter missionary in Scotland

[@MichaelCartyIreland]

Great video. What green screen are you using?

[@AJaytheCEO]

Elgato green screen

[@padalaraju8412]

Is these upstream and downstream keyers available in atem mini ...as you used atem mini pro In this video?? Iam going to purchase atem mini ...

[@AJaytheCEO]

Yes it is available on the ATEM Mini base

[@ssproductionras]

nice

[@AJaytheCEO]

Thanks

[@CreateConsumeRepeat]

Love your transitions. May I ask what templates you are using?

[@AJaytheCEO]

Just a generic transition pack I got from videohive.net

[@padalaraju8412]

Hi, I want to know is there any 4k output and multi-channel capture card to use along with laptop not desktop ...

[@AJaytheCEO]

The ATEM does not support 4k output. The Camlink 4k is an option

[@padalaraju8412]

@@AJaytheCEO thanks for the response .. iam looking for a device which supports multi input channel ( minimum 2 hdmi inputs ) and 4k output .. could you suggest anything

[@AJaytheCEO]

@@padalaraju8412 I am not aware of anything like that except for the ATEM Television studio 4k but that is not small

[@CrystalParkBaptistChurchBenoni]

"Oh no, AJ, your arm!"

[@AJaytheCEO]

LOL

[@kwinpreach]

Yeah, I’m lost.