What is a Mini Z T-plate

  Рет қаралды 9,602

Mini-Zetup

Mini-Zetup

Күн бұрын

Пікірлер: 7
@riskeyrotors967
@riskeyrotors967 2 жыл бұрын
its just like flipping the kingpin ... when all you have to do is polish the shaft and reinstall it. when you flip it what actually ends up happening is that it allows the frame to bottom out and get completely screwed over time. ps thanks for info on the dampener ... ordering one now !!!
@CR3DT
@CR3DT 3 ай бұрын
Your comment of FRP and Carbon being the same makes sense, but then they did make them out of two different materials. PN Racing even makes one out of spring steel. I wonder if it has to do with the speed at which it returns back to its original form (plane) kind of like a shock rebound. I would think the Carbon will "bounce" back quicker and limit body roll compared to the FRP? What do you think? We are talking a tiny amount that would be hard to notice every day unless you are racing and really tuning a car.
@vmddew
@vmddew Жыл бұрын
Thx.
@richardbarrattjr6205
@richardbarrattjr6205 9 ай бұрын
Love the videos brother! You got any more mini z videos in you? I just got into the sport and got the large 96 track and I need to learn from the best.
@mzondi1970
@mzondi1970 2 жыл бұрын
Good info
@popitn2nd
@popitn2nd Жыл бұрын
How soft or hard the T plate should be and how it’s gonna affect the driving?
@CR3DT
@CR3DT 3 ай бұрын
How hard or soft is going to depend on your track (grip, surface). if you have a nice flat tack with lots to traction you want something on the harder end of the spectrum since your car will #1 not be bouncing and #2 need to rotate around turns by limiting body roll. Less body roll = less traction (there are limits to everything). You would want a softer T plate in a track that is bumpy and or with low traction - again so that you have a tiny bit of side roll and this helps the rear end be planted. I will say that the factory plastic T-plate is just a place holder and needs to be replaced for racing right away just like the tires. The order of operations is: 1 - Tires (find the right combo) 2 - Suspension spring (T-plate and front spring) Hope this helps.
How to Make Mini z box Stock FAST [Basic] Part 1
9:23
Mini-Zetup
Рет қаралды 32 М.
Mini-Z Oversteer / Turning too much [troubleshooting]
10:36
Mini-Zetup
Рет қаралды 5 М.
Lazy days…
00:24
Anwar Jibawi
Рет қаралды 7 МЛН
What type of pedestrian are you?😄 #tiktok #elsarca
00:28
Elsa Arca
Рет қаралды 36 МЛН
Smart Sigma Kid #funny #sigma
00:33
CRAZY GREAPA
Рет қаралды 19 МЛН
How To Get Started Mini-Z Racing 2023
11:12
jarvz RC
Рет қаралды 61 М.
Brissie Mini-Z Enduro Race 2024
15:25
jarvz RC
Рет қаралды 6 М.
Mini Z unboxing. What is the hype and is it worth it???
7:22
Run With Mike RC
Рет қаралды 1,5 М.
Info you need before setting up a mini-z
4:27
Mini-Zetup
Рет қаралды 8 М.
Watch This Before You Buy Mini-Z “Upgrade" Parts
16:16
Kyosho Mini Z Racing With a Walmart RC Car | Shaws RC Track and Shop Tour
15:04
How to choose a MINI Z race body [basic]
15:50
Mini-Zetup
Рет қаралды 13 М.
Understanding & How to Solve for Traction Rolling
8:53
MC3WLS
Рет қаралды 8 М.
How to Make Mini Z box Stock FAST [basic] Part 2
7:41
Mini-Zetup
Рет қаралды 16 М.
Chassis/Motor Selection starting out in 1/28 scale
42:30
Inside Line Racing Race Videos
Рет қаралды 12 М.
Lazy days…
00:24
Anwar Jibawi
Рет қаралды 7 МЛН