****If you like this, I think you'll like the premium Arduino training we offer. You can check it out here**** bit.ly/3lHyzcB
@thundercats4754 жыл бұрын
Finally someone with a brain who knows how to present stuff.
@omehoque5 жыл бұрын
Your voice is very relaxing.
@programmingelectronics5 жыл бұрын
Hopefully you don't asleep watching the lessons ;)
@khaben69864 жыл бұрын
@@programmingelectronics no at all for me it's amazing to understand easily I think that what he meant too 😉
@christyinnovations5 жыл бұрын
I have explained the whole Arduino thing to bunches of people from 2nd graders to retirees more times than I can count, but I don't think I have ever been as succinct and effective as your 10 minute overview. Well done sir, very professionally done.
@programmingelectronics5 жыл бұрын
Thanks Bob!
@pokebattle79592 жыл бұрын
Bro can you make transmitter and receiver Arduino code for f-22 plane With 2servo and 1brushless motor. I will subscribe to your channel please give me
@programmingelectronics2 жыл бұрын
I'll see what we can come up with!
@muhammadsohaib36083 жыл бұрын
This is probably one of the best explanatory videos I've seen on KZbin. Thank you
@programmingelectronics3 жыл бұрын
I'm glad it helped Muhammad Sohaib! Thanks so much for your message!
@قصيعليعبدالهادي5 жыл бұрын
Excellent illustration, thanks for all the information up there. Great effort.
@programmingelectronics5 жыл бұрын
Thanks!
@DavidGutierrez-zi4dy2 жыл бұрын
how arduino help me on eeprom from ECU of automobiles in anti/theft system pin code recovery(locksmith work)
@programmingelectronics2 жыл бұрын
Thanks for this recommendation! I'll see what we can come up with David!
@Akash_Kumayu4 жыл бұрын
This amount of views should be painful, I think.
@glenmariusmanumbakken67555 жыл бұрын
its so wierd that you dont get more feedback on you videoes, maybe start making buildguides and ideablueprints?. your videoes are really helpful but doesent get enaugh cred. *edit, you already have that. my bad :p Maybe the thumbnail doesent look apealing or something , you sould get more profiling on youtube in my mind
@programmingelectronics5 жыл бұрын
Thanks for the kind words Glen! Maybe the thumbnails do look bland...
@vjdav68724 жыл бұрын
Hey, I would like to build a very simple signal integrator. I could do this in assembly code - how do I do this in C++ for Arduino? Any guidance please...thanks!
@russellmitchell68815 жыл бұрын
I just need pointed in the right direction to use a rotary phone dial as a keypad I’m 50 and very new to all this Your channel is just cool
@programmingelectronics5 жыл бұрын
Maybe this can help? www.instructables.com/id/How-to-turn-an-old-school-rotary-phone-into-an-inp/ Best of luck!
@russellmitchell68815 жыл бұрын
@@programmingelectronics Wow Thanks Im trying to do your academy thing but having trouble with setting my own password Again thanks for the help
@wissalzaher48683 жыл бұрын
many thanks for the effort that's been put into making this beautiful simple informative video :)
@programmingelectronics3 жыл бұрын
Thanks for watching!
@talalbenta81182 жыл бұрын
thank you aloooooot your explaining amazing i will take some nots from your vedio if you dont mind i am happy to get you in youtube when i will finish my project i will send my result to you thanks again&good luck
@RajinderSingh-tn9pu5 жыл бұрын
Thanks for this wonderful video
@programmingelectronics5 жыл бұрын
Thank you!
@vaishalis19313 жыл бұрын
Excellent explanation! 😊 very helpful to learn..
@AestheticAditri10 ай бұрын
This is an amazing explanation i probably saw it 4 times and shared it to my friends Thank you programming electronic academy to like this
@programmingelectronics10 ай бұрын
Thanks so much for sharing!
@AestheticAditri9 ай бұрын
@@programmingelectronics my pleasure carry on this wonderful work
@td4yd1543 жыл бұрын
So you can’t use python with arduino?
@saffawa3 ай бұрын
Hello. Thank you so much for your help. I want to use Arduino to control an RC helicopter. Is that possible?
@rubynayak4328Ай бұрын
Could you make a video on Arduinos friendly on the pocket?
@m3lateef Жыл бұрын
What if i'm happy with the project and i want to change to a pcb? Should i always use the arduino board as a whole? Can i just take the microcontroller?
@programmingelectronics Жыл бұрын
Great question Mohamed! The Arduino is a development board, used to help you easily write code for the microcontroller. Once you have your code written, and you are happy with it, you can move to your own custom PCB if you wanted to.
@leinardesteves39878 ай бұрын
Whats the difference between raspberry pi? And what is raspberry pi anyway?
@jimhenderson9199Ай бұрын
It enables an abstract idea or desire to be expressed as a code that can be implemented in the non-abstract form as hardware.
@Hashimx102 жыл бұрын
I'm not genies enough to understand all technical stuff but looks like this thing is just good for controlling very small electronics (lights or fans or maybe better voltage switcher) but lack of good computing power, looks like it can't run console games(nes, sega or any other old games) or it can't be used to record my PC game videos.
@programmingelectronics2 жыл бұрын
You're absolutely correct @hashimx10 . It's designed for electronics control, not compute.
@stardustdragon1253 жыл бұрын
Very easy to understand! Thank you!
@MrPnew12 жыл бұрын
A very well presented explanation. However it's a bit of a stretch to say that programming in the IDE is basically C/C++ programming language. There is a large overhead that the Arduino functions and programming instructions imposes to allow this programming to be made easier for the novice. So a simple Arduino directive like pinMode for example will uses quite a bit of code within the actual IDE underlying code to do what can be done in C/C++ with a lot less overhead in terms of code size. Just wanted to point that out but yes, it's a great way for people to do things without actually learning full on C/C++ programming, that's for sure. Thanks again for the great explanation. I did find a great link for an explanation of this, but as is often the way it's dead now.
@programmingelectronics2 жыл бұрын
Totally agree that the Arduino IDE does most of the heavy lifting for several functions where in c/c++ you'd be directly setting registers. I would push back a bit on this though and say that outside of those minimal convenience functions (and the whole "setup" and "loop" structure), the code people are writing is c or c++.
@boieperez3768 Жыл бұрын
i bought an arduino uno rev 3
@programmingelectronics Жыл бұрын
It's a great board!
@pravinchoudhary79952 жыл бұрын
hey,, i just want to use it for operating lights and fans of my room by using micriphone and ir light
@programmingelectronics2 жыл бұрын
Cool!
@ITsMe-vx9zp5 жыл бұрын
your method is awesome but you `upload your videos so late
@programmingelectronics5 жыл бұрын
Thanks for the feedback!
@عبدالقدوسلمداني-ع1ه2 жыл бұрын
thank you
@programmingelectronics2 жыл бұрын
Thanks so much!
@rubynayak4328Ай бұрын
I have a science exhibition coming up .…... and this helped me a lot!!
@programmingelectronicsАй бұрын
Best of luck!
@warunakumara767110 ай бұрын
sir please be kind enough to do a video series about pic assembly programming , pic micro python programming , pic basic programming , pic c programming with pic 16 , 18 , 22 ........ etc . thank u for the video sir
@949needleguy3 жыл бұрын
You the MAN! Have an upvote on me!
@trickshotphd58134 жыл бұрын
Your voice it too good and relaxing
@stevenharvell23284 жыл бұрын
Sorry the odd approach here but I need help with something. I’m using a Nextion display and I narrowed a code from Arduino someone and as I compile I get a error called ‘NexPage’ does not name a type I got the code from a KZbin search for Passcode door unlock..... I’m not good at the coding stuff but I’m trying to learn while raising a whole bunch of kids, doing yard work, taking care of a huge house, yard etc.... and this is suppose to be my stress relief because it totally I treat me but I’m stumped here....... can ya help me in any way
@samihafairoozzara1212 Жыл бұрын
please do make this type of beginner friendly stuff more~
@programmingelectronics Жыл бұрын
Thanks for the note! Will do!
@sreylinmeng50742 жыл бұрын
Hello admin, thank dis cool explanation. I would like to ask you permission that allows me translate into Khmer language. Can I translate it to my community since most of them not understand in English?
@paappu-gr3up2 ай бұрын
Such an amazing vdo❤
@drissgari67783 жыл бұрын
I have one more question . if i want to make a product that relies on the use of arduino boards, am i gonna be able to get à 100 000 or maybe à million for my products ? Thanks.
@charlenea61803 жыл бұрын
some MIT students came to my school to teach the robotics club about this
@programmingelectronics3 жыл бұрын
Very cool!
@DavidGutierrez-zi4dy2 жыл бұрын
thanks
@programmingelectronics2 жыл бұрын
You're welcome! Thanks for watching!
@johnhanley99463 ай бұрын
That was a good video, very easy to understand and informative! 😁
@rubynayak4328Ай бұрын
Very nice
@programmingelectronicsАй бұрын
Thank you!
@arielspalter74253 жыл бұрын
Excellent video! Happily subbed!
@programmingelectronics3 жыл бұрын
Awesome, thank you!
@sainathsingineedi29225 жыл бұрын
Plz make full series
@programmingelectronics5 жыл бұрын
Thanks, we have a lot of other videos on our channel as well.
@Mohamm-ed4 жыл бұрын
Thanks for the video... How can I make video like this.. which software did you use for it. Thanks so much..
@rozaveltv4 жыл бұрын
Do you have data acquisition projects that display the data to a computer using Visual basic?
@aboutin90seconds72 жыл бұрын
Brilliant and very easy to understand presentation / videos Thanks for sharing #Gratitude
@MM-np4md3 жыл бұрын
Thanks for the extremely helpful and easy to understand video!
@programmingelectronics3 жыл бұрын
Glad it was helpful!
@albertovitess18985 жыл бұрын
Please i would like you to give me some link or some advise about a projet i will like to do. The project is device for registering people's entries and exits using a batch system.
@richardbruno201 Жыл бұрын
What a great video. Thank you for this.
@programmingelectronics Жыл бұрын
Glad you enjoyed it!
@szarvasszilard50612 жыл бұрын
Amazing video , helped me a lot, thank you man.
@programmingelectronics2 жыл бұрын
Thanks so much for the note!
@abdelmalek96823 жыл бұрын
thanks man im just thinkin to learn how to use it
@programmingelectronics3 жыл бұрын
Glad it could help!
@jenishlunagariya13752 жыл бұрын
Thunderous Explanation
@programmingelectronics2 жыл бұрын
Thank you!
@thirumalairaj43655 жыл бұрын
Thanks for awesome explanation
@programmingelectronics5 жыл бұрын
Thanks for watching - much appreciated!
@sohaibali36003 жыл бұрын
thanx for this brilliant explaining
@programmingelectronics3 жыл бұрын
Most welcome!
@prudhviraj44075 жыл бұрын
Excelent explanation
@programmingelectronics5 жыл бұрын
Thank you! I feel like there is a lot to say, and trying to figure out the best things to highlight was tough.
@RyanJamesConiendo7 ай бұрын
thanks Sir so helpful
@programmingelectronics7 ай бұрын
Great to hear!
@bigpickles5 жыл бұрын
Nice video, bro. Thanks.
@programmingelectronics5 жыл бұрын
Thanks for watching.
@ADESOLAChristianah-b1wАй бұрын
Wow i love your explanation
@programmingelectronics16 күн бұрын
Thank you! 😃
@estheranadjei59383 жыл бұрын
Where will you find them
@اناليس-م5ع4 жыл бұрын
How can earn money from arduino?
@shokdj13 жыл бұрын
shutup and take my money
@dwaynearthur1476 Жыл бұрын
That was a BOSS level explanation of Arduino 😊!
@programmingelectronics Жыл бұрын
Glad it was helpful Dwayne!
@UFCFIGHTERS719 ай бұрын
Absolutely ❤
@programmingelectronics9 ай бұрын
Thanks!
@abrehamish4 жыл бұрын
Excellent presentations
@programmingelectronics4 жыл бұрын
Glad you like them!
@88NA2 жыл бұрын
Thank you.
@programmingelectronics2 жыл бұрын
Thank you for watching and for the note - much appreciated!