What is Front End Engineering and Design (FEED) oil and gas | Projects | Management | Part - 1

#FEED #engineering #oilandgas #engineeringkitalks
In this video you will find information about following titles:
What is FEED Front end engineering design oil and gas
Front end engineering design example
Some of the common Questions:
What is front end engineering
feed,
what is FEED,
abdul jabbar,
technical,
front end engineering design,
front end engineering design oil and gas,
front end engineering design handbook,
front end engineering design course,
front end engineering and design (feed),
front end engineering design example,
technical difficulties,
oilandgasjobsng,
piping tips,
mechanical,
mechanical engineering,
what is feed
Will we finish on time?
Will we finish under the budget?
What risks will be there during construction, installation, and commissioning?
What risks will be there during procurement and detailed design?
A construction industry institute performed analysis of around 1000 small and medium projects, and they found that only 5% of projects met initial cost and schedule targets within an acceptable margin. If this is ground reality, then above concerns are valid.
Questions like these cannot be answered unless proper planning, time and money is spent in the early stages of product life cycle.
A typical Production Life cycle
Conceptual Studies or Pre-FEED
Front End Engineering and Design
Design & Engineering
Installation & Commissioning
Operation & Maintenance
In any production life cycle, FEED is one of the important steps. It plays a critical role in projects success. More than just simply estimating cost, FEED provides thorough project scope, project budgets, schedule, risk assessment and project viability.
Every Project and Every Organization is unique. However, as a general FEED may have following key deliverables:
Safety
Hazard and Operability (HAZOP)
Hazardous area classification
Safety Philosophy
Environment Impact Assessment
Process
Basis of Design (BOD)
Process Flow Diagram (PFD)
Process and Instrumentation Diagram (P&ID)
Heat & Material Balance (HMB)
Equipment List
Instrument Process datasheet
Cause & Effect Diagram
Flare Study
Mechanical
Equipment specifications
Equipment datasheets
Equipment mechanical design
Procurement Enquires for Long Lead Items
Technical evaluation for main equipment
Piping
Plot Plan
3D model (Equipment and main lines)
Piping Layout
Piping material specification
Piping classes identification
Material Take Off (MTO)
Piping Stress analysis basis
Piping stress calculations (simplified or critical lines only)
Paint specification
Instrumentation & Control
Control system specification
Instruments design datasheet
Systems I/O sizing
Instrument List
Hook-up drawings
Cable routing drawings (main routing only)
Civil & Structure
Soil investigation specification
Underground network drawing (general)
Design specification
Civil works specification (main only)
Drainage network calculation
Concrete/steel standard drawings
Electrical
One line diagram
Electrical consumer list (preliminary)
Equipment specification
Equipment datasheet
Standard design drawings
MTO (preliminary)
Cable schedule (preliminary)
These deliverable are used to generate:
Project Scope for EPC contractor
Overall project cost estimate
Procurement estimates
Project schedule
FEED reduces risks and can give success in detailed design, construction, and commission and plant maintenance.
Study says benefits up to 20-30% reduction in cost and shorter project execution can be achieved when proper FEED studies performed
A FEED conducted as part of a project is initially planning phase. Initial feasibility and conceptual studies will help make the business case for a project and generally provide a cost accuracy of around +/- 30% to 40%. A well-funded and well-executed FEED can deliver a cost accuracy of +/- 15 to 25%-although preferred cost accuracy will vary by industry and customer preference.
Common Outcomes/Concerns can come in FEED
Material or equipment
Availability of Finance
Social or political impacts
Return on Investment
Economic viability
Operational complexity
***********************************************************************
Visit Most Popular Videos:
Piping Engineering Fundamentals for Engineers | Step by Step Course For Beginners | Part-1
• Free Piping Engineerin...
What is Front End Engineering and Design (FEED) oil and gas | Projects | Management
• What is Front End Engi...
PIPING AND PIPELINE Q&A | FOR JOB INTERVIEW | PART-1
• PIPING AND PIPELINE Q&...
What are Storage Tanks | What are Storage Tank Uses and Types | Design
• What are Storage Tanks...
What are Flanges, Flange Ratings in Piping and Pipeline | Project
• What are Flanges, Flan...
*********************************************************************************

[@mechadana88]

this is very helpful especially for recent engineering graduates. thank you!

[@Kiswah-ox3zz]

Wow l love it 😀 ❤❤❤❤❤❤❤❤❤❤❤

[@bravowoo4911]

Very good video and doc, thanks for sharing.

[@kamrankhan-lq7vw]

Informative.Thank you

[@azizalriddan8998]

Thanks for precious info Abdul Jabbar, can you make a video about pre FEED?

[@instengineer815]

Great summarization of this topic...Thank you...

[@kamrudeensather7677]

Great information....appreciated your hard work.....keep deliver your message , this will be highly helpful to other discipline engineers...

[@yogeshkhamkar1449]

Good information

[@AniketYadav-wl3ex]

Excellent

[@vaigawonder8225]

What is the responsibility of Hse person to Feed

[@SudanTeCars]

Thanks

[@mohdaseem7001]

Your sound is so good 👍👍👍👍

[@khana3720]

It's Better u remove background music

[@widelycurious5655]

Your doing great sir👌👏. can you brief more about Mechanical(Equipments, Instalation, Operation, Maintenance) related feed deliverables??

[@yuvasivaa]

Thanks for your clear explanation, I am working as Telecom Manager & i would like to enter Oil & GAS industries kindly advice any Telecom FEED certification courses available to learn.

[@AdiSgoel]

What is Process Duty & Pre-Engineering or Pre-FEED ? And what is the difference between FEED and Pre-FEED ?

[@Polyrytmi]

too much music i cant listen to this video

[@EnyereibeChidi]

Thanks for this cli[p,im a HSE Engineer with construction background with passion to go fully into FEED in oil n gas and have been offer an opportunity ,i need your guide on how to go about it,reviewing plant design and also certification

[@mkbhuin6193]

Feed is similarly to conceptual engg done at tender stage is that correct.

[@shivaniapte795]

Can u please also tell about the EPC contractor and also about oil & gas companies