What is the way of a CORDLESS IMPACT WRENCH

What is the way of a CORDLESS IMPACT WRENCH - Makita DTW 700 TEST

Рет қаралды 51,836

Күн бұрын

Пікірлер: 34

@kirik19647 2 жыл бұрын

*Awesome impact **MyBest.Tools** Takes tires off in a second. Plenty of power for what I’ve used it for - rotating tires. Using it on 3rd setting for removal and 2nd setting for tightening lugs.*

@darrenairey5938 Жыл бұрын

Try tightening then switch back to reverse to loosen and so on to remove stubborn fasteners.

@wiedapp 2 жыл бұрын

The question is: How often do you need to unbolt just these screws or nuts? In a professional shop okay, a tool just for that with more punch would be suitable, but for the guy at home doing occasional work, the 700 should be enough. The few times you'd need to loosen these connections, you can use the good old breaker bar, before lifting the car up. Had to do that some time ago for my dad's VW bus, not a big deal. The 700 is a chunky boy already, but the 1001/1002 is a good bit bigger. To wield both of them as a regular impact? Way too heavy and not needed. 300 and below for regular work. I have the 700 just to loosen lug nuts (doing winter/sommer wheel change for my whole family inventory), as my 285 often is too weak for that. But for (careful!) pre-fastening them the 700 is too strong, the first stage of the 285 is ideal for that.

@madlag2379 3 жыл бұрын

В каком городе работаете? Сразу видно наши люди. Ищю автосервис.

@thetruth7633 2 жыл бұрын

Hubs you will not even remove with the DTW1000, I use my 230V Makita TW1000 1200W - 1000Nm which I also use for lorry wheel nuts, they , well mostly, come off without using a blow torch first 😃🔥

@mightyfinejonboy Жыл бұрын

it's not tight if it's liquid👍👍

@HouseMastersTools 3 жыл бұрын

Good Tool

@out_on_bail 2 жыл бұрын

i think the 40v model will be able to do the hubs

@millennium3778 2 жыл бұрын

u try open pully engine bold can or not

@Alex_M73 3 жыл бұрын

Отличный тест. А я хотел модель 300 брать. Так лучше все таки хотя бы 700

@alexashka.s7856 Жыл бұрын

Какую купил а итоге ?

@Alex_M73 Жыл бұрын

@@alexashka.s7856 не помню. 700 наверное. Короче не слабую

@ricardoarancibia6583 2 жыл бұрын

Jiiii que buen video, saludos desde chile

@tim62744 2 жыл бұрын

Depends on what you have to open got a dtw 300z for wheel rims that were way too tightened in tire shop with impact gun ,fools and I’ll be telling them 300 not a hope I forget about the dtw 700;but I did get a dtw 1002z it’s a monster no other words the 300 is 580 breaking nut power on high the 1002z has 3 speed box 500 1000 and 1600 it took the nut of in the lowest setting but the anvil blows are much stronger and beefier it’s a big great monster with mass power, got the dtw 700 as well 1000 nm breaking power and smaller than the 10002 monster ,so strongly depends what u want to open

@mandar5005 2 жыл бұрын

Hi Tim, would you suggest a 300 or 700 for basic Motorycle work and car tire removal and fix?….

@tim62744 2 жыл бұрын

@@mandar5005 the dtw 700

@tim62744 2 жыл бұрын

@@mandar5005 thedtw700 has 1000 nm breaking power and is a good bit smaller than the 1002 it’s all down to what nut your trying to open and a underpowered impact is useless the 700 should do the job

@kovalenkoihor4325 Жыл бұрын

@@tim62744 Very important question, whether with DTW700 we can safely work with nuts like 8-10mm on the lowest speed? Because it's already clear, that such bolts can be just broken apart on maximum torque. Does the lowest speed resolve the issue?

@코알라-t2i 5 ай бұрын

original or copy impact wrench???