What's New At Monetezuma Toolboxes? Let's Find Out And Take The Tour Of Their Facility!!

[@VictorGonzalez-ir1qc]

wow.

[@brandonm6052]

My dad has some of the very early CPL boxes, going back to the mid 90s. That's back when we had to use a padlock to lock them with latches on each side, they're still on the farm flatbed to this day. The nice part of those is there's no gas strut obstructing the center of the combination wrenches. You flipped the lid up and slid it to the side to hold it in place. The best part is that his 2nd one is a full 30" bolt bin. Nuts and washers on the top and then a raise up shelf with bolts behind it. If I get this next job I want to buy a roller cabinet from them if I an afford it. I have a 40 some inch x 18" and for what it is it's great. Those door latches by far are my favorite and until this video I didn't realize it was patented.

[@larryborkstrom3580]

Lot of nice prouducts

[@joecampbell939]

i just bought the small 23x14. perfect for F350 longbed. just wish they had a rotating mount to hold it

[@Bills_Bicycle_Rides]

Those mini triangle boxes would be nice to mount to a wall, but the lid when open will interfere... would have to block it out with wood I guess...

[@groovemaker8997]

what gauge metal are the tool boxes made from?

[@nickayivor8432]

👌 KNOWLEDGEABLE Koon Trucking Thanks 👍 Take care and have a great Evening KNOWLEDGEABLE Koon Trucking From Nick Ayivor from London England UK 🇬🇧

[@TheTorkerman]

MAN! Been thinking what colour scheme. Was going to paint my old snap on boxes, matte black with blue accents, oh yeah!!!

[@Bills_Bicycle_Rides]

The fold down work table is actually rated for 200 lbs, not 300 lbs, I bought one and will be installing it today...

[@debugin1227]

Great innovations !

[@mansnow1100]

Do they make extreme tools tool boxes and such? The designs are very similar on a lot of products shown...

[@JustinDowDIYcentralhighway]

Sweet!!! 🍻😎🤙

[@jasonhass9845]

Listening to this guy talk about their products is so satisfying

[@bradmandawe1386]

Do you sell in Australia?

[@jimmywarledo4930]

Wonder if the truck box would fit on the silver vein service cart?

[@stevenwdoolittle1195]

Is there any tool box maintenance that has to be done like oil or grease?

[@KoonTrucking]

I haven’t done anything to the one on my service truck! It’s tough

[@timgraham7851]

May have to get one of these.

[@corysceva5661]

Do they have any old 56×20 top chest sitting around their shop? They stopped making them and I need a top chest?

[@KoonTrucking]

Email them and ask them ? That’s the only option I would know

[@ShainAndrews]

Aluminum looks good for a few years. Screw polishing diamond plate. If it were smooth aluminum I would buy it.

[@mesh1248]

The kevlar or pretty well anything can be cut with a grinder and abrasive blades

[@hddm3]

Always liked these boxes

[@laurawerner380]

Where can i buy the 5 bay power tool rack ?

[@KoonTrucking]

It should be on their site soon

[@josephalexander3884]

Excellent video. Thank you for introducing me to another superb company.

[@VDC_EDC]

That rounded top box is gorgeous..that needs to start being a thing across the industry

[@danieltubbs458]

It cant they own a design patent on it. Only way that would happen is if they licensed their design to other tool brands and received royalties.

[@KoonTrucking]

I agree it is a beautiful top on the box

[@urbanjentry222]

Sealey have a classic range that has curved edges

[@michaellindsay8934]

@@urbanjentry222 The Sealey retro tool cab

[@ryanwhalen3378]

That guy is very very knowledgeable in the items he sells, Hats off to him! It almost sounds like he was reading off a teleprompter because he knew the answer to everything and knew everything and anything about every single item they sell!

[@carsonantholz2352]

Do they make the 72x30 with red trim just curious thanks bud

[@KoonTrucking]

No

[@guyconnell2250]

It looks to me like the Montezuma boxes are the same as Menards Masterforce boxes, which is a really good box. I'll bet this outfit builds them.

[@Speed04GT]

I was thinking the same lol.

[@djosbun]

You're 100% correct. I was looking at the Masterforce boxes in September and the drawer latches are exactly as the ones in the video, as are the drawer front details. They're extremely impressive boxes at a fantastic price point.

[@towboatjeff]

Pretty sure there's some masterforce boxes in the background in the video

[@timothyfechter5977]

I’d bet my next check on it

[@urbanjentry222]

The blue is almost neon

[@KoonTrucking]

Very nice in person. Looks amazing

[@robertbates8599]

Clay What box do you recommend that I get for my Snap on box to put on top? Your opinion matters a lot to me so if you don’t mind giving me a suggestion I deeply appreciate it. Thank you in advance Bob

[@KoonTrucking]

The triangle boxes hold a ton for as small as the footprint is

[@robertbates8599]

@@KoonTrucking thank you

[@SPMech1]

WOW ! ! ! That box with the rounded over top is AWESOME ! ! !

[@KoonTrucking]

Yes it is !

[@zimmhollowfarm8414]

This was cool

[@KoonTrucking]

Thank you

[@richardmarshall1883]

Lmao I never thought about the water trick clay

[@robertzerafa4806]

Brilliant video, I enjoyed it very much 😀

[@zachstacy2448]

It looked like there was masterforce boxes from menards in the background? Is there any info on those or additions for them? Been looking at the 72” at menards but can’t find a hutch but I saw a top box it looked like Clay can you provide little extra info on them?

[@KoonTrucking]

No clue ?

[@AM-nn9sv]

No gap between top and bottom Clay!

[@KoonTrucking]

Exactly

[@sonofmontezuma3732]

I know the field service guys love them crazy how much stuff they hold and you can find your stuff quickly even at night in low light

[@mattlinderkamp9489]

You said earlier that the wrenches don't fit flush on one size, did you mention that to them?

[@KoonTrucking]

On the Precision Torque Mac wrenches you have to flip them over because of the extreme angle on them.

[@mattlinderkamp9489]

@@KoonTrucking one of the pegs was to close to the other you mentioned and the wrench wouldn't sit flat without overlapping another wrench.

[@raulserna4668]

I love your channel but you could of put in a link to buy the boxes from them

[@KoonTrucking]

If you watch the video you will hear it and see the link ...... clicked off to early my friend

[@nrvsauto8990]

my first "big box" was and still is a montezuma, love them! would recommend to anyone

[@KoonTrucking]

They are awesome

[@djosbun]

Thanks to this video I'm now contemplating getting a Montezuma as my first large box. The value seems to be a home run for anyone that wrenches.

[@nrvsauto8990]

@@djosbun its worth it, been using mine for 7 years now, the powder coating isnt even dinged.

[@djosbun]

@@nrvsauto8990 Thanks, Andy!! I appreciate your reply.

[@steveperuski5547]

These are Menards Masterforce toolboxes rebranded, they are the exact same thing except different colors you can get a master force toolbox a lot cheaper than these

[@KoonTrucking]

Actually you have that backwards. Master force is made by Montezuma. They have differences obviously reflecting the pricing is things that may not be obvious to see such as slides, gussets, metal thickness etc

[@reddog376]

Could you get the Montezuma SB180DB 18 x 12 in. Steel Shopbox Tool Chest and do a review about what it will hold. Like the number of wrenches and sockets.

[@danieltubbs458]

This guy knows his stuff and definitely see his passion. I like how he kept saying how they listen to their customers, that is rare these days. Here's a fun game to play take a shot everytime he says the word listen and take 2 if he says how they listen to their customers.

[@jaydee2620]

Wow Clay thank u. Really interesting video !!! Thanks for getting good content viewers really want to see

[@masongulizia9491]

This was a very unique video loved every bit!

[@KoonTrucking]

Thank you. It was fun

[@martymurphy7477]

I have had a Montezuma 30 X 15 steel triangle toolbox on my farm work truck for several years, they are tuff, store a large amount of tools and keeps them dry. I will be looking to get one of those work station for my shop.

[@mikevanessen8687]

I didn’t know they made so many toolboxes. Looks nice

[@bowenantonio3302]

a tip : watch movies at flixzone. I've been using them for watching all kinds of movies these days.

[@korbynrowan1351]

@Bowen Antonio Yup, I have been watching on Flixzone for since december myself :)

[@TheInfectedWreck]

The rotisserie demo made me hit the like button haha!

[@KoonTrucking]

That was cool wasn’t it!?

[@TheInfectedWreck]

@@KoonTrucking Pretty badass if you ask me, will show your video to my boss tomorrow, for the new service truck they're putting together.

[@snowdogs01]

That little ShopBox will fit in the storage bay of my fifth wheel travel trailer. Whip it out and have everything right there.....

[@KoonTrucking]

Yeah buddy. It’s perfect !

[@northbndyooper6524]

Wow ! They really have some nice products. I have to take a closer look 👍

[@ramramos5373]

Nice video an very informative

[@davidpinnix7446]

Damn good video! Thanks .

[@JustinDowDIYcentralhighway]

I’m digging the garage set up. Really nice staff cabinets in a workbench they all match that’s what I’m talking about. Plus the heavy-metal duty quality quality

[@tctwg1]

That side locker was just what I’ve been looking for 😍🤯

[@jmswyo]

Great idea! Tool Tours with Clay

[@urbanjentry222]

I’m sold on that box system just need to save up for that suspect be a usa order with me being in the U.K. 🇬🇧

[@urbanjentry222]

Found a few of the triangle box they are absolute steal for the storage available

[@paulmendenhall5226]

That rotisserie was awesome

[@jeffnealjr9543]

I'd love to see a middle box that fits the 26×18 footprint triangle box. I'm a union millwright, so I'm always in and out of my truck with my boxes, and need them to be portable. I don't use a bottom cabinet or a tool cart, but just set them on a convertible hand cart.

[@KoonTrucking]

They have a 26x18 triangle that’s waterproof and dust proof

[@jeffnealjr9543]

@@KoonTrucking right. I want a box for under that.

[@bakkencutter189]

Would also make a good pistol holder if it was lockable

[@KoonTrucking]

Exactly!

[@bakkencutter189]

@@KoonTrucking I might even buy one to use as a gun cleaning station

[@danieltubbs458]

I was thinking that would fit an M4 or AR-15 Perfectly

[@thecomanchekid]

i work in a sheet metal factory. i am amazed by some of their designs. i just ordered a triangle box last week, cant wait to get it. i would like to see more of the manufacturing process, being thats my bread and butter. i have been a cnc laser programmer operator for almost 10 years.

[@joetorres632]

awesome video Clay! I may have to buy one of those baby workbench box to help keep the tools in the garage organized !

[@jerod5636]

I had got in a bind for a box in a hurry, so after weighing the options of what I could get my hands on quickly (like, needed it yesterday quickly) I got the top and bottom 52" general from harbor freight. I really like it (I'm not a professional mechanic, but I do end up working on shit like once a week or so) and it's holding up so far. However, were these available somewhere that I could have just driven to and grabbed one, I would have this instead.

[@jasonhull5712]

I agree 100%

[@gregcothrum4045]

Great video have a great week and stay safe 👍

[@ekaufman9565]

Needs some green trim options

[@robertluna1430]

Those are some cool looking boxes. Can't wait to see what they have to offer in the future.

[@leegrimm1]

I have I think the 28” and I put the rubber that goes on top of the axle when you bottom out on the bottom of my box and my box almost never moves and I’m a farmer/ rancher and I’m still able to get it into different trucks with little effort love my box

[@danieltubbs458]

Lucky! That's awesome

[@workingmanpatriot8760]

We had seen the triangle boxes, had no idea of the whole line! Good one Clay.

[@joe-ng3ky]

See if they can make a locker cabinet with drawers from top to bottom most locker cabinets have just 4 and usually they’re pretty small

[@jasonhull5712]

Have you guys considered service van organizers for like HVAC and electrical contractors? I'd love to see what you guys do with my service van ! Keep doing what you do guys !

[@doctordiesel5467]

As far as regular tool boxes go I had trouble with my box from them ended up with a snapon as a replacement and trades that off for a matco box 8525 and traded that off for more matco boxes 8525 in yellow and ended up getting two and adding hutches top boxes and side lockers and end cabs don't know about the triangle boxes

[@KoonTrucking]

The triangle boxes are awesome. I have zero complaints with them

[@jantrzesiara8095]

That 72 inch box look gorgeous over there. I had a husky 52” with top box but the big drawer only had one slide on it an with all my sockets she was a bit wobbly

[@Rickfyoutube]

Just got a 56" John Deere box. Pretty nice, should be better when I pick up the hutch ;)

[@djosbun]

I would order that cart TODAY if I could!

[@KoonTrucking]

They are cool

[@franklabarca8734]

Do you have a coupon code for Montezuma? I was waiting for it at the end. Great informative video

[@zbrown362]

I’m pretty sure there garage cabinets are the same as masterforce brand that menards carries if anyone know for sure let me know I have the masterforce/montezuma garage cabinets and I love them replaced my old wood kitchen cabinets in the garage that fell apart

[@tctwg1]

Found the side locker for $699 when this video came out. Waited 4 days and went to purchase and it went up to $899 😡😡😡

[@KoonTrucking]

If you look on my Instagram they offered a discount code that will save you 10% off ? It’s good till feb 9

[@tctwg1]

@@KoonTrucking Thank you Clay 👍👍👍.

[@tobbytownsend9968]

I spy 'Menards sold' Masterforce storage in the background.👍

[@ChrisMYouTube]

They really have thought of all the details when it come to their storage systems and tool boxes.

[@johnburgett5040]

I would love to see them make a 60" triangle box so I could fit my 40" 3/4 drive breaker bar and my 54" alignment bars.

[@speedwrench1909]

Great Video. I really liked all the featured products. Great variety from them. The only negative I could come up with, is which One of their boxes do I start with. I’m probably leaning the larger triangle and the small table top to start with. Roll carts and their large boxes were pretty sweet as well.

[@pepelepew158]

Their quality control sucks, I’ve ordered a led light set and it came with the factory box and that box had water damage it was kicked around , they didn’t even think to put it in another box to protected. I. Called and bitch them out they sent me new ones. When it comes to these tool box it’s over priced I rather go to Home Depot and get the Milwaukee tool boxes lot durable and cheaper, I bought a brand new 68inch epic tool box from snap on and paid 5k and love it. You can actually purchase this. Box in Milwaukee brand for 2k or less. I’m not Impressed with this company.

[@markpeterson6836]

I will be ordering that cart!... Maybe two!

[@danieltubbs458]

I'm going to have to stop watching these videos from Clay!!!!! Last video cost be over a grand

[@top189h]

Thanks for the video. I had been torn between an Icon 36 for a mobile option or waiting around for a decent price on a used snap on/matco 6 roll cart. I'm liking the montezuma 36 now after hearing about the quality.

[@chriscoley4691]

I prefer the soft close drawers

[@andrewkarppinen4348]

I see a 72 x 30 in Clay's bay in the near future. :)

[@mike_holdread]

Cool video. I didn't know their product range was so wide

[@Doublelongstrike101]

Hey Clay good stuff, do they ship to Australia?

[@KoonTrucking]

I am not sure. You might contact them through their website

[@wendycharles4777]

Nice tools boxes l like design it's cool

[@flat6targa]

At 26 min. that cart needs bigger wheels as a option. the point of a cart is to be more mobil. Narrow short wheels don’t work well on a gravel yard. Other than that it looks great

[@Rickfyoutube]

True that. I agree, mobile carts need bigger wheels. Great Point!

[@bluefj-wc3vz]

Lol What's wrong with the Army tanker tool bag packed to the gills in back of wife's SUV like mine? That is a cool small ass triangle box.

[@sgibby8817]

I thought montuzuma sold. Haven’t seen them in a while. However that quick glimpse of the boxes they do look cheaper than the boxes from 10-15 years ago

[@johnsummers778]

Are these boxes made in China?

[@jeremyalbert2069]

hey montezuma !!!!! MAKE A TOOL CART FOR ME AND IL R/D IT FOR YOU !!!

[@surerockco.models3452]

I may not speak southern, but we speak the same language of tools and storage ! 😂

[@jimyep9971]

They are priced right ck out napa for the 72 x 30 Try 4800.00

[@idontknowwhattoputhere1933]

We're you in Montezuma Kansas that's where they used to be made anyways.

[@KoonTrucking]

Illinois now

[@bonkdonk8342]

Where’s Joe?

[@blainedamron8533]

I’m assuming they’re made in China

[@laytongoad275]

I really like these but they are made in China. My dads has a couple of the older ones that were made in Kansas and they are great.

[@jsa8368]

Clay, I know you got some freebie toolboxes to test out..haha.