What's the BEST Temperature?

[@cewpins]

What's the best temperature? Smoke w/ me on Twitch! www.twitch.tv/cewpins Discord Sesh: discord.gg/cewpins

[@mobilemworks]

Well said. Not everyone has the same kitchen. So cooking is a little different everywhere. Get to know your equipment. Super important.

[@basedgodjoseph2514]

Bars.

[@dj_ath]

I really like that antique shelf you have on the back right corner. Thx for the info

[@eve_squared]

I hit flower vapes at 380-420 depending on if I want it smooth hitting or thick vaping. When I dab I hit it around 500-550 preferably.

[@joshuaalonso4843]

475 for rosin is best for me

[@swutted3439]

Id smoke that

[@fatacoom1486]

For quartz I usually put lower temps for sauce (≈450), medium temps for badder(≈540) , and medium high - high for diamonds(≈560). I also make sure its not too harsh.

[@Hooiser2142]

356 for flower depending on the flowers' humidity. Sometimes, too much requires more heat

[@ryanc6878]

Whatever temp the dutch master burns at is best. Reeeeeeee

[@PressedSteel1919]

I would enjoy a bong-hit of " solventless Hash Rosin " .......:o)

[@Maxxx1410]

I set my CH B2 Controller to 330°C. Mind you, this is flower vaping, not concentrate.

[@JoshKozi]

Did your chair break? Lol

[@drink15]

Sitting too long isn’t healthy.

[@s00bly]

has a standing desk

[@lee-anne_93]

Thanks ceww your always so informative appreciate you see you on twitch dude🎉🎉🎉😅

[@cewpins]

Twitch is gonna be LIT!!🔥

[@pfdes]

For dabs i always do a cold start first and count the seconds until it starts melting. After that I just do hot starts with the time I came up with. For my rig its about 20 seconds of torching for most concentrates. With e-rigs I just adjust the temp until it starts to taste bad or burn and drop back a little. I keep a temp gun to check things if in doubt but its never really necessary.

[@Jskins]

Weed is good! Also, I like Turtles🙌

[@sqwerdles]

turtles

[@oWiKio]

High five enail w/ quartz banger 450f-485f depending on the rosin. Some strains are more lipids than others. More lipids = higher temp closer to 500. Dryer rosin = less temp.

[@ketomine.]

instead of wondering what temp to rip, you should wonder about what temp to sip

[@AcornHead]

got my first dry herb vape coming soon and doing a T break until it comes cant wait

[@s00bly]

gonna be worth it! 🎉

[@Spacecowboy710]

🤔 Cold starts all day

[@inputreflector]

This and only this.

[@swutted3439]

I don’t do them often but they are a superior technique for flavor

[@JulianMcculloch]

Thats basically putting your food ona pan thats not hot

[@GonkaGonkaGonka]

​@JulianMcculloch I'd say it's closer to being half cooked, like a fancy sushi

[@JulianMcculloch]

@@GonkaGonkaGonka i detect a little communism we only put food on hot pans around here it gives it a nice crust boy

[@mrknebel475]

With the puffco, i started low and adjusted up right to where it felt "spicey" to me. Thats good for when you have mostly the same material, my average is 475° but for rosin or anything better quality i do 420° to 440°

[@ernestohernandez66]

yes thank you for this video

[@joe8105]

If I set my Might for the first bowl, I set it on full till it buzzes. I then turn it down to 395 ish. 390 to 395 works. The second sesh is max temp , this is considering you did not reload. This is similar to crafty plus.

[@cosmonauthal7651]

I do cycles. Start at like something really low and then do two more re heats at higher temps. For example start at like 430 then go 450 then finish it at like 475. Kinda get the best of both worlds for me but like chew said everyone’s is gonna be different.

[@segaherman_twitch]

Happy Sunday

[@cewpins]

Hell yeah! 🙌🔥

[@lootaSaurusrex]

580f for dabs on dab ready 595f for flower on the terp hammer but dab wax/sugar/terpsauce defently burn higher than when i do hash

[@ofangelsflipz]

Im a glassblower, so i am very used to heating glass... the best temperature always varies depending on the material. I prefer cold starts and hot wands with a hash pipe personally, the perfect heat is a feel thing for me. The puffcos and stuff are pretty impressive and i do like hitting them but i personally would never buy one.

[@99Eternal]

I'm after flavor not a big hit so on my peak pro with 3dxl chamber I run 450, which I find with that particular setup is the spot where it's nicely sizzling the rosin, not burning it so the 2nd and third pulls also taste good. I find with higher temps the first pull tastes good but everything after is burnt.

[@forgettablelisa]

I leave it at 472 on my carta 2 and it rips and tastes great for any concentrate I use

[@deanbelle9842]

Same exact temp on my Carta V2. Ripping Live Resin

[@slugzz-]

What type of concentrate? My homie said he does 300-400 but he uses live resin I tried that with rosin and wouldn’t get vapor

[@deanbelle9842]

@@slugzz- live resin/rosin 444-500 degrees. 472 been my sweet spot but it changes over time

[@morganrickard5032]

@@slugzz- 385 burns 99%terps

[@SeniorNano]

I need the 525 temp, it leaves so much in the base so I’m always chiefing two sessions atleast in a row, 60 seconders at that

[@user-dc9rf1sy1m]

If the nail isnt glowing and my dab doesnt instantly ignite into flames, its not hot enough.

[@james11juanolag]

the white setting on the puff proxy

[@dot2274]

depends on how im feeling . if i want something terpy and light ill go low temp but if i want something that make me sweat and a faster high ill take it hot and hurty , no temp gun needed . just use my finger to feel the heat , there is never an ideal temp , it varies between glass and how long it retains heat and i only use torches , its a torch or no go , i never liked e rigs . they vape it too much , i want an actual dab

[@kimmygrrr8355]

If you have a rebuildable atomizer for the core every cup will be slightly different

[@hughlondon7157]

On the puffco peak pro I love going as low as feels satisfying, usually in the 425-475 range for me. If I’m using a rig and dabrite I go in around 520-540

[@cooperj7982]

YO! i legit lit up my flower when i didnt mean to on the flower wand, holeeey! was fresh glass bubbler too so i had to clean everything and i didnt even have the first hit haha like everything was coated in burnt grossness, so vile the flavour, also i ripp em at 219c or 426F on my flower wand with a 10sec preheat. preheat is key

[@IknuDeer]

480 1:30 XL mode has been my go to on the Peak Pro for rosin. Low enough to be tasty but high enough for good clouds with enough time to get through all the concentrate and I can just end it early for smaller dabs.

[@thebest-bt8gc]

I’ve been going around 560-570 for my puffco peak 3dxl

[@specteractual1]

The standard coil for the core I was always on red the hottest I got the 2.1 coil and I have it set to the second lowest burnt up the first 2.1 keeping it on the same temp as the stand

[@AJBuddha]

For me 2.2-2.3 volts is the best & with rigs I prefer a lower temperature, if it’s too hot it ruins the dab

[@EJQ_]

Around 600 on the Roam (it’s weak) and 1.8-2.3 on the carts anything passed that is crazy.

[@thetruthfulness4240]

You have to find out your self. That’s the best way. Peak pro v2 base model 500-511 a lil glob. 490 for smaller size or more flavor but size of dab will definitely make the temp vary you just have to get comfy

[@OrganicGreens]

on my ball vape 374f (tidow plus). My e nail like 570. This is when my coil is calibrated at room temp with no heat.

[@cybererik1]

The More You Know! 🌠

[@RoaDKiLL760]

Flower I like 340-360. 340 for the best vapor, but you won’t blow out much vapor at all, I usually lean more towards 360 so I can get satisfied by blowing out a cloud. 🤷🏻‍♂️👌🏼

[@Voodoopunk89]

peak pro 3d chamber 488 3d xl i like 450 max settings for clouds, i have a vapvana screw ball im at 490

[@patriotsfan9708]

Dab Ready 560 Terp Hammer 600 Puffco Peak Pro 530

[@CaptainDug]

520 puffco v2 max vapor I usually hit it till the smoke looks like it’s getting thin then I turn the device off and I hit it one more time while the device is off just cause the chamber still has heat so just getting the last of the hit then I clean out my dabs tend to be about 1 min sometimes like 20 secs longer when I put extra wax and double tap while in a middle of a hit

[@corruptedice5380]

Aye yo cewpins hope you’re having a blessed day so far

[@ryancrocker3567]

With the Terp Hammer I stay around 550 for both flower and rosin

[@NeonSonOfXenon]

I find that 580ºF is ideal for my flowerpot setup.

[@SamahLama]

Everyone says you should cold start with the crossingcore but u didn’t like doing that

[@rodneys2998]

1-50 mg , lowest temp works 💯 on my e-rig, perfect amount and perfect temp. I don’t want to cough that is the goal!!!

[@theburt112]

Late to the party I vape my screwball with Auber RDK 475 for first run 525 second when I’m low on flower.

[@MSAPtube]

I will never give up my torch and moderately chazzed banger

[@technodrone313]

my areris has never even been close to scorchy and its 50x easier to operate. cleaning is crazy simnple too and zero reclaim

[@growingheart8039]

I still us a camper torch 😅❤

[@swutted3439]

Then stay plugged into the matrix bro

[@kudos3961]

For my peak pro I’m at 515 Fahrenheit with the XL chamber on XL

[@alexrekzu4079]

900 degrees F is good for my shatter ;)

[@oozebrood]

540 @ 1:20 on the puffco peak pro - I like em a little warm haha

[@sqwerdles]

high

[@xiggroc]

Takin rosin globbers of that burgers and beer along ! Puffco 3dxl or 3d max vapor set 540 bho and 450 -480 rosin !😮‍💨😤😤

[@seanmcelroy6222]

ayy yoooo, but tell me what color you like your proxy though bro.

[@ericahernandez375]

Try Rise Live Resin Cart or Full spectrum, you’ll be on your asssss man, I know you’re doing the carts marathon and im telling you, those carts are worth your while and will change your mind in carts I promise!

[@513Cham]

For carts I do 2.4 volts for flavor and 2.7 for stronger hits anything higher than that is too hot imo

[@CassieRD]

My 🍃💨 vape fave temp is 200 - 220 degrees c. I like it burNNNT 😅

[@BowtieBloatfly]

535 on new peak pro at 1:40 for me

[@drink15]

Depends on how quickly i want to get high and how much coughing i feel like dealing with.

[@nicolasrancourt3958]

490 peak pro, 590 for terp hammer

[@willyo1268]

Like ur necklace, do you sell them

[@Colleen_grateful]

Took a while to find my sweet spot 💨

[@lowverte3693]

On my peak pro 3dxl I do 520 for 1 min on xl

[@RebaFluff]

I like 580 for dabbing rosin on my xl slurper. Idk I'll have to try 475

[@BonzoBonker]

450 all the way cause its the lowest the peak can go 😂

[@87mustang87]

Flower vap 205

[@slugzz-]

490-500 for the rosin I have, I’ve tried lower and I don’t get any vapor

[@technodrone313]

i run my aeris at 425

[@deanbelle9842]

Try inhaling thru the nose w dabs on Erig. Best way to smell and taste those terps and clear at the sinuses.😮

[@endybendy5320]

585 for me flowerpot bzero

[@Chr1s520]

585 on my bzero as well.

[@Kodiak_Jenkins]

Taima o suitai

[@sneakerfiend9965]

72

[@cewpins]

EZ😎

[@segaherman_twitch]

This person with the magic temperature... not 69?

[@hkann_za]

Bro how come u dont put more footage of smoking in ur vids when there's channels like RawOG and Eric Khan and Yola

[@swutted3439]

Monetization i think

[@StillTheJackyBear]

.

[@HazelEyes420.]

356-365 for my venty for me

[@KAWASAKlBLAZIN]

do a blunt only week please!!!!!!! listen you did a cart week only in the midst of them finding new pesticides so please do blunts too😢 thank you!