WHAT YOU NEED TO KNOW BEFORE YOU COYOTE SWAP

[@samsonian]

Fantastic and comprehensive PSA! You guys managed to do what few vendors are: make a reference video in which you also advertise your own products without being annoying salesmen. Instead of feeling like the video was made to sell products first, inform potential swappers/customers second or worse; it was 100% the other way around. Cheers and thanks, PBH!

[@PowerByTheHourPerformance]

Thank you so much for the comment. We try to keep things as genuine as possible, we are enthusiasts just like our customers!

[@omargutierrez7388]

Comment is spot on. I felt the exact same.

[@PowerByTheHourPerformance]

@@omargutierrez7388 Thank you bud. We have more planned and some in the works. So stay tuned!

[@chrisking7295]

Idk if I'm the only person who is planning on putting this in a for ranger 06 its Has a 3.0 stx in it now will it fit?

[@jrusted5.031]

For a moment I thought Fluffy was doing a commercial for power by the hour! 😁

[@PowerByTheHourPerformance]

Hahaha

[@Matthew081980]

😂

[@rodriguezluisu87]

Hey fat man 🤣

[@Mr.Safety.]

That's the best comment bravo sit

[@freedom-thrower2259]

Hahahaha

[@WDMtea]

I have a 66 falcon that im building and had originally decided to go, LS, yes i was going to be an LS bro, I love fords but cant beat how the LS can make power in a small package. Ive since changed direction and scored a coyote 5.0. I am currently trimming the shock towers and adding bracing. I made a mock up motor out of thin wood panels. I am able to get 2 inches of clearance on both sides of the valve cover corners and widens back up from there down leaving plenty of room for headers. Have not gotten to the steering column yet. Baby steps.

[@moo.johnference869]

It took an hour to listen to and take notes , but will probably save me months of mistakes and do overs ...thanks for the video

[@allenslayton8694]

This has to be the best to the point video I've seen thank you for taking the time to make this video. 👍

[@PowerByTheHourPerformance]

Thank you Allen.

[@ethanwhitman8761]

This is perfect. I was doing some research on how difficult it would be to Coyote swap my 01 mustang and saw this video. To the point instructions on what is needed and goes through most of the build. Thanks guys.

[@chancebih]

Did you end up going for it/still plan to?

[@thomasgrossi9162]

I have a 01 and have been wanting to do the same thing! did you ever get it done?

[@rodfatherschopshop6004]

You can clearly see why PBH is the best in products and helping to complete a coyote swap. 😎

[@YouTubeDeletedYourComment]

This would be the first time I completely build a car from the ground up. Doing lots of research when i found this video 👍🏻thanks for explaining all the little details that can really become a headache. You're the best bro

[@PowerByTheHourPerformance]

You are welcome and thank you for watching/commenting. Tune into our live shows every Wed night for even more info!

[@rachllopez6811]

I just started my journey of this exact thing!!! Its nice to have someone not only explain what would work but also someone who explains why something wont work and they also offer an alternative. Makes it less scary

[@brucesvt96]

Saved this for when I do my swap in my 96 cobra

[@PowerByTheHourPerformance]

We will be ready Bruce!

[@searchyo8730]

Just ls swap the cobra, it be ok

[@sav22rem22]

@@searchyo8730 Why would he want to go slower? Coyote is better

[@ogles824]

Definitely good info. My son and I are about to start ordering all the goodies to start building a 23T Bucket kit from Speedway Motors; and so we have something totally different from what you see in the majority of those cars, do a coyote swap. I have a 2013 Ford F150 that may wind up being the donor or we are going to sell it and buy a newer Mustang Coyote and trans out of a wrecking yard with the ECM and wiring harness. The way it looks after watching this video we will mainly need a set of custom made roadster headers. Thanks for what you do!

[@ThatTurboZoh]

Great video guys. Further proving that you guys are the go-to coyote swap experts 👍🏼

[@PowerByTheHourPerformance]

Thank you Kyle.

[@11thGen5.0]

The 4wd 6r80 has a slip yoke for those of you who want to swap one into your older trucks. I swapped a 6r80 into my 07 f150 fx4 and it took some modification but its in and driving. Next up is the 5.4 swap to the 5.0 coyote 😊

[@marktarascio4766]

The Gen 2 also have the addition of the oil squirters underneath the Pistons to help keep them cool.

[@thechocolatestarfish904]

I plan on dropping a Gen 1 into my 1998 GT, would love to keep my 4r70w instead of having to buy a new transmission. People say LS swaps are cheap but you can easily find a Gen 1 in good shape for less than $4500 and I’m up here in Jacksonville where car parts within a 100 mile radius don’t last long, North Florida has their share of car enthusiasts 😂

[@bergePanzer581]

Awesome! Saved for future reference. Going to Coyote Swap my 2011 Crown Victoria. What a time to be alive.

[@toranowatson7551]

That's the same set-up with the Town car, are you going with the F-150 motor and trans or mustangs setup? Thinking of swapping the gen 3 F-150 motor and transmission in with whole harness and computer

[@bergePanzer581]

@@toranowatson7551 hey there, I'll likely be doing a truck motor from a wrecked vehicle. I live in the middle of literally nowhere, and I'll be lucky enough to get my hands on a truck engine lol. I know the differences more or less between the two platforms, and the different generations well enough. We'll see what presents itself. In either instance, gen 1 Mustang manifolds are choice for panther swaps as far as I understand.

[@bisbopjefferys9622]

I would like to say your a real class act easy to understand and follow along. You guys ever need some help call us

[@richscott3597]

Good job on explaining different areas of concern, swapping to early cars. Hoping to do a Coyote Whipple or equiv in 64 Comet which has a FE in it now. Also, upgrading front susp with Mustang SN95 tubular front clip for ease of parts. You'll be hearing from me. Thanks again.

[@nathanielfleming8523]

I'm looking at a 2012 f150 4wd, looking to install complete engine, auto trans, and transfer case in a 78 bronco.question is what am I looking at to using from truck, and will still need to purchase?

[@joelubner3879]

All of your products are top notch and are making a coyote swap into my 81 Mustang so easy!

[@PowerByTheHourPerformance]

Thank you Joe. Get that project done and send us some pictures!

[@mypony7310]

This was the video i was looking for. Very well done! Thank you for putting this together.

[@PapaWheeliesWorld]

Such a great video! I'll be doing a coyote in my crown Vic chassis swapped f100 when I'm ready. You guys will be my source! Thanks!

[@cesro_official]

This will for sure help me out one day in the future to build my 1984 f150:), currently I’m 17 and this just brought me in to a lot of knowledge

[@177SCmaro]

Btw, it's not a veritable runner intake, it's a charge motion control valve. It's basically a flap near the intake port that acts a little like a venturi in a carburetor. The idea being to enhance the air charge velocity at low engine speeds to improve combustion and then open the valve at higher engine speed to remove restriction. For an engine swap you can pin the valve open if it's not running an oem ecu and it acts like a normal intake.

[@arthurlovett6045]

Frank: You the man!!! Covered it all. Swap Gen 2 or 3 with 4R70W Trans in my 1997 Mark VIII LSC to start, the possible 6 Speed Manuel later on. Thanks, AK

[@PowerByTheHourPerformance]

Thank you Arthur. Yes you can change it later on. With a 4r70w you will use a manual trans control pack which will also be used with the 6 speed manual later on.

[@Doesntmatteratall]

This video is excellent

[@jp360ford2]

Having hard time finding motor mounts for Coyote. I have a ‘59 Fairlane it’s going into. Any suggestions? Thanks for this informative video!!! The part that really resonated (and reality checked) with me is what you want out of it. Is it a cruiser, car shows, etc? Are you just looking for long distance trips? Gen 1 and Gen 2 are just fine. That opened up so much more in my search that it doesn’t necessarily have to be a Gen 3. Subbed and followed!! Thank you guys for all that you do!

[@treyblack6354]

I’m a newbie at this. My 17 ecoboost blew up now I want to swap a coyote in there for more power. I don’t know where to start

[@lanceopperude5868]

WOW, What a great video. I'm subscribing to this channel. I want to put a coyote in my 67 bronco. Have a LOT of questions but this video answered most of them. Thank you for this very informative video.

[@JJ-7519]

coyote swap my 02 F-150 xl currently has a 4.2v-6(junk)

[@leeyarbrough9636]

Factory parts oem , this guy hit it right , folks wonder why shit don’t work right well one reason it needs factory oem or motor craft stuff to get the performance out of these vehicles. Good video here.

[@PowerByTheHourPerformance]

We agree!

[@MustangGuru]

I’ve been doing a swap into my 94 z28. It’s been a challenge , trans that will used is a power glide. I’ve been doing this swap for about 2yrs now. Im deep into it and don’t recommend anyone trying it hahahaha.

[@richmac918]

This is one of the most informative video's I've ever seen on the Coyote swap. Great job and thank you

[@SpeedyBoyy]

Awesome ! I'll save this when I get out of college and build my 66-69 Mustang

[@PowerByTheHourPerformance]

Let us know when your ready, we look forward to helping with your swap!

[@SpeedyBoyy]

Power By The Hour Performance thanks !! 😊

[@jonturner4076]

Good stuff, Frank - very informative. Thank you!

[@PowerByTheHourPerformance]

Thanks bud. We are working on more soon.

[@welderteach]

Good information!!!!!! I need to call you guys, explain what I have already and get what I need to move forward.

[@staffwilson]

Awesome Video. Why? Exactly what the customer needs to know. What about a Steering Column w/ QA1 front suspension for a 1970 Ford F100 that connects from the rack to the steering column?

[@12ramort]

Saw Justin Pawlaks s197 coyote swapped on the hoonigan channel and got me thinking. I wanna do one so bad. Seeing this video gives me lots of hope!

[@PowerByTheHourPerformance]

That is one cool ride, I believe we have seen it at Sema too.

[@peterstiopu6070]

What needed for a engine swap for a 2008 Ford Lincoln suv with a 5.4/ swap to 5.0 coyote

[@cbassd7311]

Best video ever thanks pbh

[@jimwion4977]

Don't know how old this video is but very helpful I'm thinking about putting a Coyote in my 64 Clemente Comment convertible I think it would look kind of sweet And run like a bad outta hell

[@pixelpusher8986]

One of the best informative swap videos. Straight and clear. Thank you!

[@PowerByTheHourPerformance]

Thank you Pixel Pusher.

[@markmakkinga4039]

Awesome video, thanks for all the info! I will definitely be calling you guys when I boost my coyote. Appreciate you guys paying it forward.

[@Daniel-ge6mf]

Awesome video gonna save this. I plan on doing this on a p71 crown Vic and make it manual

[@PowerByTheHourPerformance]

Go for it!

[@paulesparza6522]

I’m want to put it in a 2018 ford Raptor. Is this possible and worth the swap?

[@Angry-Little-Fish]

When I swamp the engine to coyote. Can I use my aftermarket stereo and dash? Or do I need something else. I’m deciding between hallteck or holly terminator x for my 15 f150 2.7l swap to coyote

[@derekfowler9228]

Brilliant!! looking to put a Coyote engine in my 51 Merc! Very informative!! This was great!! Sold me when the time comes this summer!

[@PowerByTheHourPerformance]

Glad I could help! Please let us know if you need any products. Also, post up any questions you may run into.

[@glenndiorio8967]

Glad I found this. Getting ready to do a GenI or II in my SN95 '02 GT. I'm in CA so it will be smog (CARB) legal for the state. I also open track the car so that will be a plus. I'll be dropping an email soon to go over my build, but at least I have a little better idea on what's involved. Done this type of work all my life so it'll just be another challenge. I plan a good documentation as well. Thanks!

[@PowerByTheHourPerformance]

Awesome Glenn, we have track guys on our staff! in fact the guy in the video has a track car and ran it in the American Iron series.

[@se1663]

They did upgrade to a metal pan for some trims of the 2018 F-150 sometime in 2018. P/n: JL3Z6675F

[@professorwernstrom]

Thanks for the great info! Working on a swap into my ‘66 Mustang, will end up being a total resto. I’ll definitely be using this as a reference.

[@PowerByTheHourPerformance]

Sounds like a fun build Hector. If you have any questions feel to post them here or email us at [e-mail]

[@professorwernstrom]

Power By The Hour Performance thanks, I’m sure I’ll have a ton of questions. Appreciate the assistance,

[@yotaismygame]

Great video. Lots of useful info. I wish I could find information like this with swapping a 3.5L EcoBoost into a classic mustang.

[@jeremygattenby2183]

Did you put an Ecoboost in a Mustang?

[@yotaismygame]

Jeremy Gattenby I’m in the planning stages for a 69 Restomod build and after tons of research I found it to be just as expensive to put a coyote motor in the car. Both motors would require the same amount of work and are roughly the same cost/ power output. I’d love to have a twin turbo motor in my mustang but at this point I might as well do a coyote swap. With the coyote swap many have done it, many companies have parts for the swap, I can buy a wrecked gt to get many parts I’ll need compared to having to source a 3.5L, manual transmission and all the parts associated. I even have access to below market prices on the parts but it’s still about the same cost either direction. Might as well do a coyote swap then right?

[@jeremygattenby2183]

Saw Greater I love the Ecoboost motor. It delivers an amazing amount of torque. It’s light weight, efficient and quiet. Personally I prefer the coyote for a Mustang. It’s a 5.0, it’s got the hp and the muscle car sound. I say go Coyote but honestly, both drive great.

[@dannyrighi]

I have a 96 gt automatic , I bought a 2016 wrecked manual gt , do I need to buy anything or I just replace parts from one to another ? Thanks

[@BryPrime917]

Once I've saved up, gonna use this to help try to put a coyote in my first gen ranger. I've already figured out the engine bay size problem, but that can't start until I'm finished turning the thing into a temporary daily driver. Would be pretty sweet to do this to a 70s crew cab tho....

[@PowerByTheHourPerformance]

Awesome and thank you for watching..

[@zin6749]

Do you know where I could find a comprehensive guide for swapping a coyote into a 9th gen f150 (1992-1996)

[@abdullahiftikhar6509]

How much power can the gen2 F-150 coyote handle

[@ReyesBuilt]

Awesome video and break down, thank you guys for helping the community

[@superchargedcoffinz]

Excellent video, I saved this for when I plan to do my swap on my 03 mustang v6. Thank you for the info! 👍

[@PowerByTheHourPerformance]

Glad it helped! Here is a document parts list we drafted for the gt guys. A lot of it will cross over to you and your build. docs.google.com/document/d/1D52g5Yn2grHJk8TOTkGTMR2RCra1RVJ_nHQIllJHu-E/edit?usp=sharing

[@marathonman96]

I'm so glad I stumbled upon this. I have an 04 mustang v6 and having all this information is a big help. Thank you for all the details. It's just what I needed.

[@11dmills]

Been debating whether to go with a stroked sbf or a coyote swap in my fox in the near future because i was concerned about doing the swap but it seems like there is a huge amount of support for the swap these days. Will definitely reference this video when the time comes.

[@PowerByTheHourPerformance]

There is an immense amount of support now for the swaps. If you need any help feel free to post up or reach out to us.

[@markmccarty9793]

A 393w swap has to be the easiest, cheapest way to go fast! Coyotes are awesome, but wide, expensive, and simply too expensive!! A 393, or jump to a 460 based motor is easier in foxes! You can make a fox fly with a 351w based motor!! The low end torque 385 series motors with heads, cam, intake is thousands of $$$ cheaper!! Far fewer parts to worry bout to boot! The Coyote is so wide you could put a 3rd series 521vin!!

[@markmccarty9793]

I've done 3 2300 4 banger and one of those little redheaded stepchild 6 cylinder swaps! With the 5 liter motor Mounts and crown vic oil pan its a drop in! I got lucky, scored a crown vic police motor, Mounts, alternator, power steering, air conditioner! A blind squirre can find a nut once in a lifetime!

[@ryan8773]

Whats the best PARTS LIST for min parts needed for a full 2006 mustang gt 4.6 removal to Coyote 5.0 install? Anyone have a link ?

[@nvwlsnvwls2785]

Very interesting, Thanks for the detailed list of action items to consider.

[@briancollins381]

What a productive and informative video.

[@PowerByTheHourPerformance]

Thank you Brian. We have more coming. Anything you would suggest to cover?

[@jacklarkham7009]

Hey guys I have a 1980 ford cortina TE and it is my massive project, I have not really started on much yet, I'm more so just laying out my goals, aspirations and ideas just so that I have an idea on the direction I'm heading. And by this video I am considering engine swapping to a Coyote. This has been an awesome video. I was wondering if anyone has any tips that could be more specific to my build if anyone has seen something like this done to a Corry. Cheers

[@JoseGutierrez-ur9uu]

great video very professional and specific to the point ! definitely he knows what he is talking about .

[@CBRuRedE1]

Just picked up a 2006 Vista Blue GT with 57,000 miles on it. Definitely going to do a Coyote swap and this video was very helpful. Thank you for sharing and greetings from the Buckeye State.

[@ryan8773]

Did you do the parts list yet?

[@trevor0245]

I have a base model v6 2006 vista blue and was thinking about swapping a coyote in a year or two once I’m done with college. She needs some work but she’s been good to me.

[@hilltim54]

Great info! My son and I will be building a notch back this winter/spring and will be using a coyote. This information helps alot!

[@PowerByTheHourPerformance]

That is awesome!

[@Javi-lu4zs]

Very informative! Will def be checking up your website next spring when i do my 05 v6 coyote swap. Thanks a lot for the video!

[@PowerByTheHourPerformance]

Javi we have a new harness coming out that will make that swap much much easier than even a fox body. As soon as we have it we will be doing a video on it. subscribe so you do not miss it.

[@Javi-lu4zs]

@@PowerByTheHourPerformance Sounds great hopefully i can get it in time! I'll be def be doing a video with a thorough walk through since there is really not a single one on youtube for the s197 apart from Johnathan harder's GT and brenspeed's V6 but they don't go into much detail hands on doing the swap. Johnathan mentioned he used one of your control packs so that's what brought me here. It'd be cool to look back to this video and comment 6 months from now once my swap is done

[@anthonyjones5047]

Javi following as I plan on doing the swap this spring

[@Javi-lu4zs]

@@anthonyjones5047 Still looking to do it?? I'm starting on mine next week. Frank was helpful through email so i think i should be good to go to get the car running with this v6. Probably won't post videos til i finish the swap, but it'll be posting on IG @ Mostank_vzlow. Trying to get the build done before the spring then i'll have time to edit the videos

[@anthonyjones5047]

@@Javi-lu4zs yes sir i have a 3v 4.6 but i want to swap it asap i already have donar car

[@auggiegibson2346]

What do you need for a S197 TR3650 transmission car? I work at a junkyard do I need a control pack to run a Gen 2 F-150 coyote into my S197?

[@estebanmederes4447]

I cannot wait to install this "Cayotie" engine

[@PowerByTheHourPerformance]

KaiYotay!

[@CalypsoCoyote]

Great info Frank. I made sure I saved this for future reference.

[@Jesse-ih3vw]

So I’m thinking of coyote being my first swap say I want to put a gen 2 mustang coyote engine in a 03 f150 what would I need for it to work

[@A1rB0rN.]

What about a ford 1968 F150 XLT ranger can u swap a coyote into it.

[@seangibson2035]

Great stuff! Do you have a recommended front suspension for a 67 mustang?

[@Frankbrewer-r3e]

What do I need to do to take a six speed off of a 13 coyote motor and put it behind the 351 Cleveland

[@christiannash1719]

About to do a second gen coyote 6 speed swap out of a 2017 mustang into a 78 f100 custom step side. This was very informative on what will be needed to do so for the most part. Will most likely buy some of the components you offer to help with the swap.

[@lorenzoenzo8050]

I see you guys almost every other day with my random walk ins

[@byroncoffelt7023]

Great information guys, thank you!

[@JohnnyRebKy]

I wouldn’t even know where to start. My biggest mistake was not learning much about wiring. When I see a bunch of wires going everywhere I just give up. I’d love to have a COYOTE f100 and 6 speed but the jungle of wiring makes it impossible for me. I’m afraid to ask what it would cost to pay someone for a install I think a Edelbrock EFI system on a old motor would be next best thing. They really seem to work well at making the old motors more efficient. One guy with a 396 BBC went from 11mpg to 15.5mpg by the EFI swap alone. That’s a significant gain!!

[@PowerByTheHourPerformance]

Johnny, most swaps will consume about 100-120 hours to wire, install, and plumb a powertrain. That does not include frame modification if they are more than bolt like a fox chassis mustang. The f100 do have some killer swap options out there for suspension but shops like Fat Fender Garage have mounting kits for stock chassis. Mix that with our powertrain products and the swap becomes for of an installation then an exercise in figuring things out. The wiring for the powertrain is just about all plug and play for both manual and auto. So do not be afraid of that, we got you covered!

[@dawynhardy4803]

Is it possible to coyote swap a 94 mustang? I haven't seen much but would like to so it's easy to pass emmisions

[@michaelbenson257]

Thank you so much for your time today release of this video I really appreciate

[@PowerByTheHourPerformance]

You are welcome. Make sure to sub as we have more coming

[@JohnnyRebKy]

I think the Truck coyote also has a extra oil cooling feature designed to help it cool during towing. I can’t remember exactly what it is but it’s a modification they made to the oil circulation system

[@mikepate8100]

yeah good video just bought 16 roush motor 6r80

[@natehahn85]

Can you use a 10 r80 on a Gen 2 motor?

[@Grapeman135]

Dude its always been of dream of mine to own a Killer new edge Mustang! I've been doing a ton of research on this engine swap! It's super intimidating but this video definitely helps let me know what I need to research!

[@PowerByTheHourPerformance]

Check out this link docs.google.com/document/d/1D52g5Yn2grHJk8TOTkGTMR2RCra1RVJ_nHQIllJHu-E/edit We wrote this up to help guys doing that exact swap. Thank you for the support.

[@Grapeman135]

NO THANK YOU! This is awesome. Keep the content flowing!

[@RonByers-m3j]

I have just installed a gen 3 coyote in a 95 -F-150 the engine is currently at a 5 degree angle . ( Front is higher by 5 degrees ) What is an acceptable amount of angle?

[@hershellumiere]

Real soon...I'm gonna have one in my 06 GT.

[@PowerByTheHourPerformance]

do it!

[@hollaatbanski2936]

In what order should you purchase the things needed for your coyote swap

[@jdbchrome1512]

I agree 100 percent with using factory computers my son and l built a car and used a new style computerized engine and transmission,we used a popular aftermarket computer,and yes it runs well it will randomly loose tune and have to be retuned kinda a pain but that's the aftermarket for you lol 😆

[@DerrickHill-y2s]

What about 98 expedition

[@wilburjordan3370]

Thank you very good information

[@sdragnut]

Great information here, Thanks!! If one wanted to use the 4r70w trans, would that require a separate trans controller?

[@StraightLineCycles]

gen 3 coyote, can i use my E4OD, i know it will bolt up but how do i control it

[@FOEHMR0024]

Thanks for the info

[@mr.dagger501]

I have a 2.3L eco boost mustang and I was wondering if the gen 3 5.0 would fit it should right? To me it seems logical but I’m not sure if the motor mount would work or if I will need a new transmission I know for sure I will need a new exhaust but I just really want to know if the 5.0 would fit and work fine with my stock transmission

[@genericdude6551]

If I were 20 years younger I would take on this project. I seriously doubt anyone where I live would be able to do a job like this and get it right.

[@jasonhall60]

Sure would love to have my '17 Explorer done

[@Spongebob_mc2]

Very Informative thank you for the video.

[@mt4508]

Excellent video on swapping the Coyote engine. I will be swapping a Coyote into my 69 Torino fastback, looking for an engine now. I'm unsure if I should go with an F150 engine or find a Mustang engine.

[@PowerByTheHourPerformance]

If the budget is there we recommend scooping up a Mustang engine for sure. They typically have more upgrades and power right out of the box.

[@nickolasprice9422]

I’m planing on swapping my 3.8 V6 base 2000 to a 5.0 coyote

[@PowerByTheHourPerformance]

Awesome, we have a write up on our site that can help you plan this. Keep in mind that the differential in the v6 is not an 8.8, upgrading that too is recommended.

[@PowerByTheHourPerformance]

Thank you for watching and commenting on the video. Subscribe to our channel and hit that notification bell so you do not miss any of our latest content. We have live streams, build videos, and product updates on the way.

[@KYLE_FROM_THE_FUTURE]

Great vid! Definitely going to reach out to guys for my Yote swap into my 65’. 🤙🏽

[@PowerByTheHourPerformance]

Please do! We have plenty of solutions for you!

[@Norrisnettv]

This is great info! Thanks for putting this together!

[@itsjadon87]

Amazing information, thank you so much!!