After 3.5 Years Update Video Here: kzbin.info/www/bejne/nHjXcpaZi8tkpLM
@danhofstede9642 жыл бұрын
I followed the steps to replace the rubber pad on my keys. It worked perfectly and cost less than $15. Thanks for making this!
@dennisman173 Жыл бұрын
You actually don't need super glue to secure the rubber part. I just replaced mine and used the video as a reference, but I noticed there is an extra plastic part right under the rubber that you can remove with a little flat head screwdriver. It just needs some controlled force in order not to break it. After you remove this plastic part, you fit the rubber onto it, like wearing it as a cap, and then put it again in place. It needs to click in place and you are ready!! The plastic part kind of sandwiches the edges of the rubber between the shell and the plastic part to keep the rubber in place. Great video btw, very detailed!!
@craig106600 Жыл бұрын
Thanks Dennis V - you're right - hold the two pieces in place with one hand and with the other, pull the edges of the rubber over the edges of hard plastic. They fit securely together - then click into place - no need for glue.
@daltontyson Жыл бұрын
I had to use glue. It wouldn't stay in
@danielemerson57906 ай бұрын
Worked for me too!
@AB-ps1sx2 жыл бұрын
Arnold Schwarzenegger lil brother
@smashyrashy Жыл бұрын
Underrated comment
@matijajurajic1312Ай бұрын
😂😂😂
@Africafan2 жыл бұрын
I tried to renew my rubber pad of the key for over one hour. Then I found this video. It's so easy. Remove the old pad, put a little bit super glue and press the new pad on. Perfect. Saves me a lot of money. Thank you for the video
@GrantPerryNZ Жыл бұрын
Brilliant. Such an obvious solution that I hadn't thought of - to simply replace the rubber onto the existing keys rather than try to move all the components over to the new set. I also managed to not need glue as others have said, hopefully it stays in place without it. Seems pretty secure.
@abhinav3336 ай бұрын
Helpful video. Thanks. Was able to do this in about 10 minutes. I learnt the best way to get the main casing out is to stick long nose pliers in the small hole under the key joint on the side and pull.
@thatguyyoudontknow7 ай бұрын
These are the shittiest fobs I've had in my life. Hyundai should honestly replace the rubber for free when they do this. Of course, I am here because mine is in horrendous shape.
@sloandavis2 жыл бұрын
Yes, replacing the rubber pad saved time and money! Also, I did not need to use super glue. I simply used a small, flat screwdriver and worked it in around the edges. Snug, tight, and works. Gracias.
@brucep97292 жыл бұрын
How about making a video of how you snuggled in the rubber cover, I can't get it to snap in, been trying for an hour.
@jcampbell100 Жыл бұрын
Please where did you buy the rubber pad? Thanks
@sloandavis Жыл бұрын
@@jcampbell100 Amazon
@abdulazez7492 жыл бұрын
I suffered from tearing the rubber several times until I discovered that there is a piece of plastic under the rubber that can be removed with a little force and then inserted into the rubber cavity and then easily screwed into place again. The calf will be fixed without the need for any glue
@silkyway65753 жыл бұрын
Glad you simply recommend changing just the rubber insert. Replacing the whole case looks a bit daunting to me. :)
@Elia_rizkallah3 жыл бұрын
Its easy iam 15 i changed it under 2 minutes and the whole key costs 4 dollars
@claudiomontreal81152 жыл бұрын
Thank you, your video has been the best one I have seen. Followed your steps and was able to change the key fob.
@y1ink11 ай бұрын
Thanks for this managed to replace the full key shell. Lucky I watched the video didn’t realise about the immobiliser chip
@sluggingbread2 жыл бұрын
Thank you for your help! I bought a replacement shell and didn't realize I could just scoop out the button section and replace that with much less stress. Awesome vid. Cheers!
@yellowsnownl3 ай бұрын
Very clear instructions, helped me a lot!
@bumblebeeyaj9375 Жыл бұрын
GET TO THE CHOPPER! Great video by the way
@wazzi17847 ай бұрын
Thank you thank you Hyundai dealer in Sydney wanted $600 per key to replace. Thank you also KZbin .
@MsD3L3ON3 жыл бұрын
Thank you for such helpful tips👍🏼changing the rubber was so much better for me😅
@douglarissa54593 жыл бұрын
Thank you so much..this video was very helpful😊
@albou52592 жыл бұрын
Where can I find just the buttons??
@michaelfrazier95372 жыл бұрын
I just need the rubber piece. Where do I purchase it from?
@stefanocomparini48922 ай бұрын
Grazie per il tuo video! ho perfettamente riparato le mie chiavi con solo € 5,00!!🔝🔝🔝
@summer-np6fx4 ай бұрын
Minor trial & error. Think I'll try it.
@johndooley88373 жыл бұрын
Thanks a lot excellent video
@RamtinArdeshiri3 жыл бұрын
Rubber button is all I need! Thanks for sharing
@oscaryelisabetparraalbalad1629 Жыл бұрын
Hola cuántas vueltas le das al muelle para que recoja y estire el espadín de la llave
@oscarsoto41219 ай бұрын
Hola cuantas le diste?
@richardmullins428611 ай бұрын
I can't find a screw behind the Hyundai logo on my key fob. Can't see any screws elsewhere on the fob! Do I just force it apart with a pliers and hope for the best?!
@markusheitmann9 ай бұрын
Just force it open, there is no screws on the original fob.
@funnyhunny15502 жыл бұрын
jEES YPU DID NOT SHOW US HOW YOU OPENED THE CASING???? THATS THE IMPORTANT PART
@einkleinerrabe20232 жыл бұрын
I can not open tgis piece of.... I tried alot... Please help
@courtneycarpenter52413 жыл бұрын
So you didn’t have to take it to the dealership at all to program? I took my new key shell to get cut and was told only the dealership can program Hyundai keys
@xenonentity3 жыл бұрын
You don't need to have it programmed since you're moving the chip/circuitboard into the new case - it's already programmed.
@Elia_rizkallah3 жыл бұрын
The shell is the only part that changed he simply take the mother board and the old key puts in new shell close it up
@iyere6811 ай бұрын
don't be supprised these supposed Chinese knockoffs are originally produce for the various manufacturers.
@henry-g3xАй бұрын
Didn't show how to wind the spring
@kihzz64724 күн бұрын
I’m trying to figure that part out too because that’s the current problem I have. My key won’t flip opened now and doesn’t lock in place
@Sam4U29 күн бұрын
but HOW??? HOW open it all???
@churchofclaus2 жыл бұрын
I can get the spring to pop the keep out the key wont stay closed into the rest
@trickycamputar Жыл бұрын
Thanks man
@sachinkanchan63403 жыл бұрын
what kind of glue to use?
@bhaaratsharma6023 Жыл бұрын
Thanks Arnold Schwarzenegger.
@ShanJoy-zn5kd Жыл бұрын
Amazing mate
@williamdemickjr.9849 Жыл бұрын
The rubber did not stay with super glue
@karan.ambasana3 жыл бұрын
I ordered using the link provided, but I did not receive logo/sticker in the pack 🤨
@daltontyson Жыл бұрын
The dealer just tried to charge me $512 for a replacement fob
@einkleinerrabe20232 жыл бұрын
Awesome danke!!!
@vagramvardanyan94075 ай бұрын
This video goes on and on and on for 13 and half minutes for a video that should only be 2-4 minutes he talks about everything in great detail except but leaves out what is important and what we came here for
@user-vf9wy8kr6w29 күн бұрын
ALSOTHE
@big_mac60373 жыл бұрын
How does it feel and look ,quality wise?
@kolrobi2 жыл бұрын
He says it in the video at the beginning, have you not watched it?
@michaelteves39773 жыл бұрын
Arnold is that you?
@someguy2744 Жыл бұрын
5:02 - Conan The Barbarian starts smacking the key, 🤣 it made me laugh. (I don't mean anything bad by the Conan thing and thank you for the video, btw).
@macdonangus3 жыл бұрын
Cheers
@mohnadalbkri8618 Жыл бұрын
الله يرحمه برحمته الواسعة مرحبا مليون دولار أمريكي ولا شي ٥٤ مرحبا ٥ ٥ مرحبا مليون دولار أمريكي ولا شي ٥٤ مرحبا مليون مبروك