Wheelie Simulator 2.0

[@Meddes]

The first Wheelie simulator with that side balance! Awesome want to try it ;)

[@henrik3224]

Saiskohan tuota kallistuksen vastusta säädettyä takarenkaan pyörimisnopeuden mukaa, tai mopon asennon mukaa. Mitä kovempaa menee sen paremmin pysyy suoras. Ja sama mitä pystymmäs mopo on sitä kevyemmin se kääntyy/kallistuu...Pitäisi ruveta ihan rakentamaa ja sotkemaa kaikenmaailman asentotunnistimii sunmuita mekaanisii hilavitkuttimii. Taitaa mennä liian hifistelyks! Helvetin hyvä tuolleenkin! Ootte huippui!

[@lyreo8239]

add a big fan so you get some wind-action going

[@jamessaddler4994]

SFT ROCKS. Keep up the good work. Just discovered your videos and I wish I was 26 again. 72 going on 73 but still miss riding more than I can say. 🧙‍♂️

[@kazy6335]

I feel Bad for you

[@marcobatista999]

add red a blue lights beihnd (cops chasing), and maybe add a fan to simulate some wind

[@padepade8]

You should add a wheelie timer or distance counter to it! I can also help if you need a hand with that😁

[@magnuswf]

If you tried a person who have never done a wheelie and show us how long it would take him/her to wheelie a real motorbike it would be so cool! I have never done wheelies on motorbikes, motocross or anything other than 50-70cc mopeds and my bicycle, but to me it looks like the feel on the simulator could be pretty real as it is now with the sideways movement.

[@Electobat]

Small motor to run the front wheel. I have noticed people change weight balance but also move the stearing. If the wheel is moving it will represent similar forces to when people adjust the steering. Because the reaction force will be perpendicular to the input you may have to put the wheel machine on a turntable as well to allow it to twist.

[@bmch89]

You can put killswich on the simulator frame connected to the bike so when you fail and the two frame parts of the simulator tuches the bike "dies".

[@kinttr6761]

An industrial fan, so there is wind, just like real life.

[@JuhisRacing]

Why do you have two levers on the left side of the handle bar?

[@stuntfreaksteam]

yeah one is original rear brake and other is our stunt rear brake.. and because its not our bike we don't want to take original rear brakes off..

[@JuhisRacing]

ok :D

[@moritzsur997]

one for the clutch and the second one is connected to the brake on the back of the bike. This way you dont have to brake with the foot whikle doing a wheelie

[@nakkisampyla4460]

You know that electric bikes dont have clutch right?

[@GoonRides]

How much would it cost to get this made? Looks like fun. I’m no fabricator so I would have to buy it prebuilt.

[@spk2475]

if you cant make it yourself its better to learn on an empty parkinglot or somethin

[@BorisFett]

Great idea. You guys make it look so easy.

[@stuntfreaksteam]

+Boris Fett thanks dude!

[@Atsu100_]

You should make the straps longer so if you go too far back you will fall of like IRL And maybe put a mattress behind the machine

[@joo7932]

Atsu 100 the whole idea is that you won't fall

[@Atsu100_]

jöö, yes. But it would be a better simulation

[@samuelsippola7025]

Tossaha on vaikeempi keulia ku normaalisti koska irl ei mee nii helposti sivuttai kaatuun ku tossa koska irl renkaan pyörimisvoima (en muista oikeaa nimee :D) pitää pystys aika hyvi

[@stuntfreaksteam]

+Samuel Sippola kyl tossa on helpompi voin kertoo 😅

[@samuelsippola7025]

Stunt Freaks Team ok :D

[@Luftbubblan]

This looks more fun than the versions iv'e seen before. Never tried one my self.

[@I_am_T0ny]

Just bought your sweatshirt and it came in today. Looks fantastic. Thanks guys! Can't wait to wear it on my bike next year

[@stuntfreaksteam]

+I_am_T0ny nice to hear!!! Can i ask where you from?

[@I_am_T0ny]

Stunt Freaks Team Illinois, USA

[@stuntfreaksteam]

+I_am_T0ny awesome!!!!

[@I_am_T0ny]

Stunt Freaks Team I might also get the gloves later. Really want to wrap my bike in your style too, but my favorite one isn't sold anymore :/

[@caxotasXtreme]

Great job guys!!! One question...which is the weight and the dimensions of the roller for the rear wheel?

[@stuntfreaksteam]

+Alejo dont know man! We bought that from our friend and we have just modify it better.. maybe someday we could build one from the zero so we know better

[@caxotasXtreme]

Thanks for your answer anyway. Congratulations for your job from Spain!

[@joelhaakana8033]

Add like a lighting thing that lights up always when you fail

[@8620jesse]

Ois varmaa aika hyvä jonkuu näkönen ilmasin siihe että jos kallistuu liikaa ni antaa jonkuu äänen tai vastaavaa ni porukka tietäs millo kaatuu 🤔

[@enricopedak1]

Good job. Put somekind of a indicator lamp somewhere. If top frame is touching the bottom frame then the FAIL light will be ignited. Quite easy job and can be done without external electricity, use motorcycle battery and few leds. Ou and if its possible then indicator for going over 12 o'clock too. Thanks for this video. Make more videos please.

[@stuntfreaksteam]

+enrico pedak yeah good idea

[@stuntfreaksteam]

+enrico pedak yeah good idea😁👍

[@Icebane43]

Add a light or buzzers that go off when you go to far back or side to side to tell people they just crashed.

[@v5000a]

Some kind of a trip meter maybe?

[@stuntfreaksteam]

+v5000a yep!!

[@Crisp_Crow]

“There’s fire... There’s FIRE!” “Nice!”

[@mikkomanninen4445]

That whole thing looked like its more hevier than normal bike to lean sideways so i think you should make the thing ligther

[@thisizadel4134]

Please make a video of how this machine was made

[@jan_menge5259]

What do you think about a wheelie/stuntframe at the rear?🤔

[@stuntfreaksteam]

+BlauWeißeDT125 if it was our bike sure but its not so no 😁

[@jan_menge5259]

Stunt Freaks Team ah okay😃🤙

[@mikemike8985]

Hey I was wondering how can I get one of these built

[@christianst3055]

How did you make the resistance of the "barrel" where the rear wheel is ontop, if it has no resistance, the front wheel would not start moving upwards

[@terotin9426]

Seuraavaks lisäätte tunnistimet et jos ns "kaatu" eli osuu toho runkoon ni tunnistin pitää ääne

[@dannyaustin84]

I can't describe in words how ace this is!!! :)

[@teemurantala4712]

Tää o vi*u hyvää contenttii! Hyvä jätkät teetteks joulu spessu?

[@cbrzach6002]

it might not be like doin it fr but I would love to have one it looks so fun

[@FaithandActiondotnet]

I wish I could practice on that thing! Great idea.

[@johnmoe2806]

Think the point of gravity is much higher and should be closer to the accel. The accel is the place the tilting should happen imo. But of course much better than a fixed platform.

[@late9462]

teiä pitää siirtää toi saranapiste suurinpiirtei takarenkaan korkeudelle niin sillon se olis varmast vielä todenmukasempi. kun jos miettii niin oikeesti keuliessahan se ns. saranapiste on siinä missä takapyörä ja tie kohtaa

[@hupattaja]

Kyllä se saranapiste on siinä akselin kohalla oikeestikki

[@hupattaja]

Aaa sori... tajusin vasta nytte mitä tarkotit! =D joo samaa mieltä et ton pyörän pitäs olla syvennyksessä ja saranoitten korkeemmalla

[@sexbatangpelivivideot5639]

The wiili simuleitor :D

[@lukasfjallstedt4422]

Add lights that turns red When you lose

[@ottoheijari4720]

Joskus tulevaisuudes vr lasit tohon messii nii ois aika hyvä👍

[@eliasmartensson6921]

You guys should sell does ! Btw great video

[@topias6522]

The thing is that, e-bike costs 9-10k euros!

[@eliasmartensson6921]

Topias i know but still

[@pontusnordstrom2051]

This is so cool!

[@joeleriksson7341]

tja

[@TheConstitutionState]

I love how tools complain and say oh it's not real, well no fucking duh😭. Supposed to help ya learn the basics of wheelies if it was supposed to be exactly like the road you'd be out on the road learning and possibly wrecking your bike🤷. Funny what ppl will whine about

[@pporter1715]

So where do you buy one?

[@LMJee]

Try with an actual dirt bike, in the real world you need to know how to shift and keep from stalling during a wheelie.

[@DeltaFINN]

Training mode. When the reach the balance point it beeps. =D

[@magnuswf]

Very good idea! Also if they tried a person who have never done a wheelie and show us how long it would take him/her to wheelie a real motorbike!!

[@ramiretz]

very cool iidea and i bet its soooo much fun .-)

[@simololl8207]

The tilting point should be higher, right under the rear wheel. it should feel more real :)

[@Arkoss]

Exactly what I was gonna say. The rig pivots way too low

[@tonesandpedersen7311]

Please make more summer mopeds😂

[@sinryden3632]

you should do a stopie simulator.

[@0subswithoutavideo803]

*facepalm*

[@rant4la]

make the sideways rotatin larger so it can tilt more that way its more realistic

[@sunshinebolduc1635]

What did you use for the roller drum/axle/bearings??? Thanks!!

[@Finnsoft]

next you have to do an endo simulator

[@ArjenJongeling]

I like it, I wheelie do.

[@antonhalkola7312]

Put a fan in the front to simulate the wind

[@emilk43]

Mun mielestä toi sais liikkuu sivuttain viel vähä enemmän? Tekis vielä vähä realistisempaa siitä

[@emilk43]

Mut silti hyvää työtä!

[@teemurantala4712]

Samaa mieltä

[@stuntfreaksteam]

+Emil Kallo mut pitää miettiä kaikkia lapsista aikuisiin jotka ei oo ikinä ajanu tai keulinu moottoripyörällä että toi laite on turvallinen😅

[@emilk43]

Stunt Freaks Team mitää mistää turvallisuudesta

[@emilk43]

Stunt Freaks Team eivaa juu ymmärrän ei siit vaarallist voi tehä ;)

[@lfmedia1373]

please make video how to make the wheelie machine

[@kiwinick1613]

is the roller that back wheel is sitting on have tension or just free spinning cheers

[@Charlie-gt1ru]

kick ass kiwis do you know it?

[@ethancutts4742]

I like the idea and all but just go out and do some wheelies

[@matiaskarjalainen7968]

Ethan Cutts It's cold and the road is icy and snowy

[@ethancutts4742]

Ikkuna Nalle oh well that is a good reason

[@D24-k8w]

Its for events mostly

[@ethancutts4742]

Ronox oh nice

[@sdqsdq6274]

more interested to see if that old dude manage to wheelie in real life

[@dirtbikerider_official_7829]

The lifting if the front wheel is way to easy on ur simulator...with your spring guided lifter

[@topias6522]

That is made to pop up easy, because it's made for people who hasn't ever wheelied and are trying to do wheelies with that simulator machine for first time ever!

[@stuntfreaksteam]

+Topias thats 100% right

[@rona291]

You guys rock!! I have got to make one for me and share with friends... specs /plans ? ...I would be forever in you debt!

[@stuntfreaksteam]

I can show you guys inside of the simulator one day

[@silviadrifting]

show us ;)

[@jonttu1426]

Hyvä video🔥🏍💨

[@mattiamazzeo439]

How do you get the bike up? Has the roll under it any brakes so thats like street for the bike or does the roll spinn free?

[@Crisp_Crow]

It rolls against the wheel. It simulates the road but with no friction allowing the wheel to spin in place. The way he picks it up is by pulling up and going full throttle

[@DdDd-rp9zw]

Kuka teist on paras keulimaan katupyörällä ja paljo sillä on ennätys? :D

[@hattara4]

Dd Dd Kyllähä nää kaverit keulii nii pitkää kunnes paikat puutuu/menovesi loppuu

[@joo7932]

Joo tolla tasolla ei varmaa metrejä mittailla ku keulitaa

[@janusforsgren]

Eli mitä muutoksia lisää? No tehä voisitte vähän uuberoida tota vehettä? 🤔🤗

[@kirajanichuets2903]

Janus Forsgren are you from suomi? 😅

[@samjuli9293]

Kirajanichu ETS2 Yes he is. I think.

[@PapaWheelie1]

Great idea and machine

[@petrisuokas9163]

Onko turhan raskas koska koko lava kallistuu jos teette pelkästään takapyörän lähettyviltä kallistuvan lavan ni voisi olla kevyempi kallistaa tai pelkästään takapyörän rullan/kiinnityspalkin.

[@stuntfreaksteam]

+petri suokas noilla jousilla voi säädellä raskautta

[@XOLLERvsTane]

put RGB leds on it

[@recklessrockcrawler]

If you could mount the drum axle holding assembly on a pivot then you wouldn’t have the weight of the entire frame to fight against

[@nortondlcl]

Great job!

[@chrischambers7588]

How do you get the resistance on the back wheel ?

[@Laurittolife]

Same

[@KenMarshall-qb2xk]

I.need.to know u engineering

[@anddzi2]

hello, how do you have resolved the resistance of the roller

[@renarsleitis6225]

Resistance for what? To simulate some upslope? Inertia is the key, play with roller mass and diameter ;)

[@MisfitRidersCrew]

Rakennelmaa vois yrittää keventää jotenki ja messuja ajatellen vois olla hiljaisempiki. Saisko sisäpuolelle jonki sorti vaimennusta?

[@Niko-ii7ol]

Kyllä ääntä maailmaan mahtuu. Jos tossa on jo sähkö kotari nii ei sitä sen hiljasemmaks ees kannata yrittää tehdä

[@YourProEntertainment]

tulkaa välillä pk-seudulle, olis varmasti enemmänkin yleisöä!

[@stuntfreaksteam]

+YourProEntertainment mp messuillahan me ollaan!

[@wavy_tomo144]

I need one so I could learn how to pop the clutch

[@luketheposer6665]

i cant pop a clutch for shit either

[@Levi-vf1fh]

Just go out onto a field and keep trying to rev it and drop the clutch a little at a time that's how I learned

[@ryanborton7010]

all i can think of is sueka down boy see how many people get the reference

[@Astivo]

Are you sellin this product? Im interested in one

[@ShadowRTSgbg]

Hey, I live in Sweden can i try? xD I can take my bike to Finland!

[@stuntfreaksteam]

Sure! Come to the moror bike expo called ”MP Messut” in Helsinki:)

[@rekkitralph3979]

Hiw muvh did it cost to construct

[@jjaygunz]

Wheelies are never that straight! Oknly when you get real nice they start to look that straight. Also you will always get a wobble here and there in the real streets. 😂💪💪💪

[@jordanbhatti440]

Do you sell these?

[@aliz8765]

in real life most people dont have electric bikes!! they pop wheelies on real bikes...

[@daveross1968]

How much to build me one?

[@roihu2807]

i reckon a lot and these guys live in finland like me so the shipping would be astronomical

[@berndrc9709]

Jo that's a wheelie simulatior!!

[@LeandroTercette]

What is the power of the motor?

[@LeandroTercette]

No need to answer anymore. I had make some calculus and some experiments here and who want to create one is just to use 1 kw motor and a vfd

[@deanrobert8674]

5.23 umbrellas

[@1kickass]

I want to build one maybe use a log with a piece of bar through it so it can spin then two triangle pieces bolted down to a plywood 2x4 frame a few tie downs and a long custom axle bolt that seems like the hardest part

[@feriddzajic9168]

trebao si baglamu postaviti sto blize platformi na kojoj ti se zadnji tocak vrti,bilo bi realnije(you should put the rake closer to the platform vhere rear tire is atached,simulation would be much real or acuret)

[@derbimies4359]

Same in english please

[@Mikko_Tamminen]

Liinat vähä pidemmäks ni saa enemmä kulmaa et tulee tunne et nonni nyt meni ylitte xd

[@barryweyman3259]

That’s sick 👍

[@x0kuu]

Millos näitä tulee shoppii myyntii?

[@dannydobinson9136]

Make a video showing people how to build there own

[@jackykabuki3745]

Good Job Bro..

[@covv]

Damn only 50 dislikes thats good btw can someone notice me

[@madmike2634]

Redy Wolf senpai

[@liljimmy1208]

Redy Wolf I noticed

[@danielfornataro9406]

Shout out to my nigga rest wolf

[@laytonrobison2339]

add a industrial fan for wind

[@marufhossain7487]

layton robison and shower for rain

[@ppgturuset1172]

Olin Tampereen supercrossissa kattoo tota wheelie simulaattorii ja näyttää että nää on ne StuntFreaksTeamin tyypit 😂😂

[@pokekingdaprince1423]

That's cool as fuck!!! Great job man

[@garageosgar516]

tällä sais siistin greenscreenin tehtyä! :D

[@stuntfreaksteam]

+JopiiZ nii sais 😁 ei olla vaa löydetty meidän lakanaa

[@erkhembayarluvsansambuu1222]

My roller running just free how to adjust roller like a road?

[@enduro-parts-aus]

very cool

[@miskaknuutinen4807]

Hyvää video☺☺☺🏬🚵