When to Use DMP Flatness

  Рет қаралды 1,375

GD&T Basics - Engineer Essentials

GD&T Basics - Engineer Essentials

Күн бұрын

Пікірлер: 2
@chrmeiss67
@chrmeiss67 4 ай бұрын
1) I‘m afraid, there is no reale feature function according to „flatness 0.005 M“ at datum A. 2) If this plate is srewed or stacked, a complete differend specification is required (please see: The plate can be screwed from two different sides). 2) If someone wants to use „flatness 0.005 M“ for whatever reason, then it is easier to write 1.000 -0.02 +0.025 without additional flatness. Kepp it simple! If a fit is required, it‘s a very good idea to keep in mind the gauge, which explanes the simulation of the missing contact partner. If you work with 3D-CAD it’s very helpful to work with assembly constrains to explane contacts. If you create a nominal design where all features with fit function are at MMS, all parts in your assembly are representing the go gauge against each other! A specification is only necessary to control maximum of fit clearance. Unfortunately with the modell of GD&T (or IS0 GPS) a specification uncertainty against nature function appears. Should we start to speak about this issue?
@brettkrienke2109
@brettkrienke2109 3 ай бұрын
At 8:52 you say when using DMP flatness that those surfaces don’t have any form control. Certainly they are not uncontrolled. Although DMP Flatness breaks Rule #1, the limits of size are still controlling the form on the individual surfaces. There’s just no MMC boundary. Instead there is a virtual condition boundary that the surfaces cannot violate. So there’s still form control. Maybe you just meant it’s not as tight of a control as the “.005” flatness.
Flatness with Datum Targets
7:05
GD&T Basics - Engineer Essentials
Рет қаралды 1 М.
When to Use DML Straightness
16:10
GD&T Basics - Engineer Essentials
Рет қаралды 1,3 М.
Quando eu quero Sushi (sem desperdiçar) 🍣
00:26
Los Wagners
Рет қаралды 8 МЛН
How many people are in the changing room? #devil #lilith #funny #shorts
00:39
Cheerleader Transformation That Left Everyone Speechless! #shorts
00:27
Fabiosa Best Lifehacks
Рет қаралды 13 МЛН
When to Use GD&T
7:25
GD&T Basics - Engineer Essentials
Рет қаралды 1,2 М.
Datums for Castings
17:17
GD&T Basics - Engineer Essentials
Рет қаралды 1,9 М.
Size Dimensions to Avoid
8:35
GD&T Basics - Engineer Essentials
Рет қаралды 1,8 М.
Composite tolerances explained
5:56
OriginInternational
Рет қаралды 32 М.
Ebenheit: Die 9 häufigsten Fehler und wie du Sie vermeidest!
15:59
BeSt Toleranzmanagement GmbH
Рет қаралды 4,2 М.
02.GD&T Maximum Material Condition (MMC) Formula and Visualization
5:13
Position on Bolt Hole Diameters
7:13
GD&T Basics - Engineer Essentials
Рет қаралды 2,3 М.
Reading GD&T Drawings Step by Step
8:25
R. Dean Odell
Рет қаралды 42 М.
Professor Owners of La Salle?! | Decades La Salle
44:19
Decades La Salle
Рет қаралды 7 М.
Quando eu quero Sushi (sem desperdiçar) 🍣
00:26
Los Wagners
Рет қаралды 8 МЛН