Where to get Nissan Consult 3+ R2R software

[@robertl.grayjr.nremt-p994]

What would I need besides this Consult 3+ R2R to program new remote fobs for remote start for. 2024 Frontier Pro4X? The factory kit comes with 2 new remote start fobs and a new hood latch. I have a SnapOn Zeus+ with the Nissan upgrade software (added Nissan and Chrysler OEM access but don’t know yet what all the Nissan access can do)

[@Zingaas]

I too am curious as to what vehicles our snap on can do. Were you able to get this resolved?

[@JakeLocksmith]

I would like to just download for now, to be ready for a job. Does the subscription start immediately after purchase?

[@toolhutusaakathecarflasher3019]

Nissan starts as soon as you pay them. You can download prior to paying

[@ansautomotiveinc2891]

Hey thank you for the video. I wanted to ask what are the advantages over using Nerds Or C3R2R. which is a better fit?

[@badboy8739]

I have a 2010 maxima i have to replace my instrument cluster. Can i adjust the mileage with this software?

[@toolhutusaakathecarflasher3019]

Mileage can not be adjusted with consult3+ r3r software

[@hloretero]

Can you tell me the difference Ners and the R2R I also see under support Tcm calibration for 25.00 I just need to code the tcm. Also if you store the cal in the cloud and reuse it ?

[@toolhutusaakathecarflasher3019]

The r2r is very similar to consult3+ with some glitches. It will install the cd for a cvt trans. Ners will not perform that function

[@Avermitus]

Does this work with 2010 G37?

[@frederickwinter1823]

Does this support writing ip characteristics after replacing valve body/ cvt?

[@BipVuongAnCapTheMuaMayBayXao]

Isn’t it R2R only work for diag 2018 and up??? Can I use cardaq 3 to diag 2000-2017???

[@toolhutusaakathecarflasher3019]

r2r is not just for 18 and up. As I have tried to show. I use it mostly 10 and newer. very glitchy prior to 10

[@markrampersaud]

What can tool do I need to program a 2017 infiniti Q60. I have replaced the TCM.

[@tomking3942]

Do you know if key programming is available for the one day subscription?

[@toolhutusaakathecarflasher3019]

Yes a full scan tool is available for 1 day. really depends on what kind of car you need to do. Some of the nissans require an immobilizer add on

[@DavidGutierrez-zi4dy]

thanks

[@kdautomotive1165]

Can it be on same drive as NERS?

[@toolhutusaakathecarflasher3019]

yes

[@ryanh3671]

Are you aware if I can use the gm mdi2 with consult ? I've heard it somewhere and curious if it was you ?

[@toolhutusaakathecarflasher3019]

I have never tried

[@pablooyuela7347]

can you perform a clutch point relearn under the transmission module?

[@toolhutusaakathecarflasher3019]

Yes

[@silentnitelights404]

Can you reprogram a 2013 Infiniti G37 BCM? I saw a video of a guy using Consult III+, is the 1 day subscription the same software he was using in order to reprogram the BCM? Background details, it’s a 2013 Infiniti G37, sunroof is leaking, we repaired the leak, it destroyed BCM, bought a used BCM plugged in, car says no key detected. Video showed how to reprogram using Consult 3+ but this says consult 3+ R2r, same thing?

[@toolhutusaakathecarflasher3019]

Consult 3+ r2r is the short term subscription

[@NavySturmGewehr]

What is the difference between consult III plus and consult III plus r2r?

[@toolhutusaakathecarflasher3019]

The r2r is intended for use with a jbox. From what I have seen 2010 and newer it is almost identical. Pre 2010 it has a lot of holes

[@NavySturmGewehr]

@@toolhutusaakathecarflasher3019 So for a 2019 I'd need the r2r? Thanks for your time!

[@toolhutusaakathecarflasher3019]

@@NavySturmGewehr if using j2534 yes. Only supports cardaq plus 3

[@shakeyperspective3981]

What would you recommend for an 2008 Xterra?

[@OQureshii]

Do you know if I would be able to calibrate my distance sensor with the $30 one day sub? Would you also be able to clear any codes thrown by the ADAS?

[@toolhutusaakathecarflasher3019]

Many of the nissan require a target. Yes the r2r software will allow the calibration but you will need a target

[@marcreyes161]

Can this calibrate DAS on a q50 hybrid ?

[@justinshelby5908]

Will Snap on pass thru pro 4 work on nissan ? which is basically cardaq plus3

[@toolhutusaakathecarflasher3019]

Yes

[@ADDAUTOMOBILESERVICES]

👍

[@dgkparasite1037]

Is the nissan software able to be used on jatco cvt used on mitsubishi?

[@ANATURALDREWSASTER]

No. MUT is for mitsubishi

[@ThEmEsSiAh187-CFGeorge]

Is it true Nissan is coming out with a new VCI?

[@toolhutusaakathecarflasher3019]

Yes

[@ThEmEsSiAh187-CFGeorge]

@@toolhutusaakathecarflasher3019 would you happen to know the name of it? Thanks

[@sebry25ify]

will software work with bosch mastertech VCI?

[@toolhutusaakathecarflasher3019]

Nissan Supports only the cardaq plus 3. Otherwise use at own risk

[@kalarustenly1699]

berapa harganya softwarenya consult 3 + R2R dan apa bisabisa di interface j

[@kalarustenly1699]

Berapa harganya softwarenya Nissan consult plus

[@ANDYW031084]

This Nissan web Requires I'd and pass. Where to get this so I can buy ecu data