Which Compressor Wheel Performs Best?

  Рет қаралды 8,870

KC TURBOS

KC TURBOS

Күн бұрын

Пікірлер: 26
@802Garage
@802Garage 6 ай бұрын
Solid overview! Just for viewer reference, dual plane wheels are also often called splitter wheels and instead of being listed as 6x6 or 7x7 it will often be 6+6 or 7+7. Also note that different wheels which can fit the same turbo may have different blade heights, how far the blades go up the center shaft or nose. Another area which can vary is nose and hub thickness, altering the weight and total flow area.
@jeremykeith3152
@jeremykeith3152 9 ай бұрын
Great explanation Charlie.
@KCTURBOS
@KCTURBOS 9 ай бұрын
Thank you!
@Quebecer_Powerstroke
@Quebecer_Powerstroke 9 ай бұрын
Sir, what are the benefits and drawbacks of single & dual plane wheels ?
@KCTURBOS
@KCTURBOS 9 ай бұрын
The differences are essentially negligible. one isn't really better than the other. Depending on the turbine its attached to, one might spool up slightly quicker on the DYNO. But there are also a number of other variable that play into that equation.
@CraigLandsberg-lk1ep
@CraigLandsberg-lk1ep 6 ай бұрын
No help at all 😢 you people play your cards close to the vest
@privilegednpc
@privilegednpc Ай бұрын
​@CraigLandsberg-lk1ep I have read that a single plane wheel will produce a higher peak boost pressure than a dual plane wheel but will spool slightly slower.
@roberthoffman9426
@roberthoffman9426 4 ай бұрын
Thank you, short and concise, very well done with no bias.
@aydenflores4075
@aydenflores4075 9 ай бұрын
Which ones sound better , have a better whistle?
@aydenflores4075
@aydenflores4075 9 ай бұрын
And should I get a turbine wheel paired with compressor wheel to get the best sound or is it not needed? Lly duramax
@KCTURBOS
@KCTURBOS 9 ай бұрын
Thats a great question! The compressor wheels dont produce a whole lot of sound, especially in comparison to a VGT turbine wheel. The sound that come from the comp wheel, has more to do with your intake and cabin insulation.
@KCTURBOS
@KCTURBOS 9 ай бұрын
The key with paring a compressor wheel and turbine wheel is having the inducer of both sized evenly. EX: a 68mm comp wheel with a 58mm turbine wheel, is going to spool like cold honey. Best way to get that super loud sound is to buy a balanced assembly DIY kit that has a 10 blade turbine and a well matched compressor wheel (we have those on our website) or buy an entire drop in turbo and call it a day. (we have kc Vortex drop on duramax turbos that scream well) Give our customer service a call if you have any more questions, wed be happy to help out! 480-688-7160
@aydenflores4075
@aydenflores4075 9 ай бұрын
@@KCTURBOS I see, what do you recommend for a stock lly vgt turbo to make it sound better ?
@Kodi5204
@Kodi5204 8 ай бұрын
@@KCTURBOSsee I feel like the compressor wheel changes the sound a lot and the compressor bark sound I had so many different wheels on my 7.3 I had 5x5 wheel that had much louder whistle than the stock 9 blade then I got a 7x7 compressor wheel from rd2fs that wheel had a much different spooling sound than before then after that I got a 66/88 6x6 billet wheel witch sounded pretty good now I have a 6x6 66/88 compressor wheel with a t51r housing and that’s the loudest set up I’ve found I plan on trying your guys wheel next. I know this is all intake spooling noise nothing to do with exhaust noise
@Bacongrease00
@Bacongrease00 9 ай бұрын
Can I dyno my excursion at your shop?
@KCTURBOS
@KCTURBOS 9 ай бұрын
Im sure we can work something out! Give us a call 480-688-7160
@PowerHungryPerformance
@PowerHungryPerformance 8 ай бұрын
Excellent explanation guys!
@DanCombs-vv1lu
@DanCombs-vv1lu Ай бұрын
So what will make more power? 6+6 or 7+7?
@MyBlowncobra
@MyBlowncobra 14 күн бұрын
Love the content..I buy all my KC from matt at blessed performance
@TheSol115
@TheSol115 3 ай бұрын
good video
@m.akbart3840
@m.akbart3840 4 ай бұрын
😮very helpful.
@Bradley0beaver
@Bradley0beaver Ай бұрын
You didn't even explain which performs best for any scenario...
@sepg5084
@sepg5084 3 ай бұрын
If a billet wheel is created from a cast billet instead of a forged billet, then the strength difference won't be that much. Cast wheels can also be machined to shape, if needed.
@KCTURBOS
@KCTURBOS 3 ай бұрын
True, but the main reason cast wheels are used is they are cheap to manufacture. If a company then has to machine the wheels after cast then that just increases the cost and defeats the purpose.
Turbo Compressor designs - Discussed
24:38
TurboDirect S.A
Рет қаралды 41 М.
KC 9 & 11 Blade vs The Competition - Dyno Results!
10:37
KC TURBOS
Рет қаралды 6 М.
The Best Band 😅 #toshleh #viralshort
00:11
Toshleh
Рет қаралды 22 МЛН
coco在求救? #小丑 #天使 #shorts
00:29
好人小丑
Рет қаралды 120 МЛН
6 vs 7 vs 11 blade billet compressor wheel
11:19
Turbo Lab America
Рет қаралды 87 М.
V-Band VS T3 Turbine Housing
3:33
HPT Turbochargers | HPL Oil | AFIS Injectors
Рет қаралды 9 М.
Billet vs cast compressor wheels
4:40
TurboDirect S.A
Рет қаралды 13 М.
Turbo compressor wheel upgrades
11:54
bcbloc02
Рет қаралды 75 М.
How Does The KC Jetfire Turbo Kill the Competition?
9:20
KC TURBOS
Рет қаралды 21 М.
The ALL NEW KC 9 Blade & 11 Blade Turbos!
4:42
KC TURBOS
Рет қаралды 8 М.
How To ACTUALLY Drive A Diesel
7:15
KC TURBOS
Рет қаралды 193 М.
The Best Band 😅 #toshleh #viralshort
00:11
Toshleh
Рет қаралды 22 МЛН