Which Nail Gun Do I Buy (for Beginners) | Finish vs. Brad vs. Pin nailer

[@lenpiazza8493]

I'm a beginning woodworker, this video is excellent, and Anika is among the very best teachers on KZbin.

[@Anikasdiylife]

That means so much thank you!

[@Jizzlewobbwtfcus]

I felt exactly the same : ]

[@faizai228]

Agree 💯

[@pooheadlou]

Ditto!

[@katrielabbott7385]

This is the BEST video on explaining nail guns I have seen on You Tube! Thorough but not over confusing.

[@holenzrouse5120]

This is the best I’ve viewed so far on nailers. As a beginner, this is the type of information I needed to hear.

[@princexavier6925]

You are an excellent teacher. I learned more from this video than from all the burly tool guys I watched previously. You gained a subscriber.

[@Anikasdiylife]

Wow, thanks! Glad to hear!

[@topmario14]

The author does like to from scratch, kzbin.infoUgkxbnOKZBE4evMO5V2vroHeCjq6d_MV6wJO shaping and trimming wood from large blocks into fine finished products. As another reviewer mentioned, most projects require a lot of high-dollar equipment that most of us don’t have the room or budget for. But, knowing how to do these things, even if we won’t be able to practise the full stack project, is still great.

[@Anikasdiylife]

is this a riddle? :D

[@dollydaydreamz7149]

Scammer

[@Jeep4Wrk]

Excellent comparison and info about the different nail guns. When building a huge room addition back in the early 1980s, I used a hammer and nails with a set punch for door jams, built in shelves, and moldings. One of the great advantages of nail guns is that you are not beating on things with the hammer. The nail gun shoots the nail in without the pounding--which can shake other things loose.

[@ninam1838]

Thank you so much. Exactly the information I was looking for with details, no off topic discussion or music. Straight to the point!!

[@Anikasdiylife]

So glad to hear!

[@sheezabrickhouse7299]

You are SOOOOO awesome for helping those of us who are beginners. I'm a new homeowner and I really appreciate your guidance and how you totally explain everything for DIYers. Thank you kindly beautiful and many blessings to you!

[@Anikasdiylife]

Happy to help!

[@sarahpark4207]

Hi Anika, thank you so much for this video. I went to home depot to get a nail gun, only to realize there were so many kinds. I had to come back home and watch a bunch of vids - Your video helped me to decide to go with the 18 brad nail gun. I also love that you talk about safety, how to use it properly. I'm subscribing your channel!

[@evelynclarke9876]

Anika’s explanation of the different tools, sizes, types, use, etc. is fantastic! I went to several websites to get info. Anika does it all, in a concise and easy to understand format. Love this site, now I know what nailer I need for my project! Thank You Anika!

[@Anikasdiylife]

Awesome! Thank you so much!

[@Jerry-j6r]

Thanks , I'm a beginner & your demo takes care of my questions before I start ....Good Job !!

[@Anikasdiylife]

Glad to help!

[@jintaktakjin]

After watching this and other videos, you really have left me with no questions unanswered. Thank you very much.

[@roxannawalker6406]

This video was so informative. It is very difficult to select a tool. You really did a great job breaking down the information! Thank you!

[@gemgeorge1012]

Really helpful Thanks

[@TheGuitarman1968]

This is a really good video with a lot of useful information for beginner woodworkers and crafters. I have the entire lineup of Ryobi Airstrike 18v cordless nail and staple guns. They work very well, and they are a great bang for the buck (compared to the more expensive red, yellow or blue colored tool brands). The trick to keeping battery powered nailers working properly (and to prevent jamming) is to put a few droos of lightweight oil in the nail channel at the front of the nail gun (recommend by the manufacturers). Also, "technically" most battery powered nail guns are "pneumatic" tools, as the battery powers a small built-in compressor, that propels a piston, which shoots the nail. I also have a whole set of air compressor powered pneumatic air-nailers, but I find myself using the Ryobi battery operated nail guns a lot more these days. The battery powered tools are just really convenient. The other two useful, and popular, air powered "nailers" that were not covered here are the framing nailer and crown stapler. The framing nailer (straight or angled) uses very large 16d (penny) nails, and it is really useful if you are joining larger lumber like 2x4's and above. The crown stapler is very useful (and a must) for installing crown molding, baseboards, fiberglass insulation, wood and foam siding, and roofing tar paper. A good stapler is also a must for doing upholstery work. The two-pronged staple holds much better in these applications than a single shaft nail. The smaller crown staplers will take the common T-50 staples, from 1/4" up to 7/8" long, while the larger crown staplers will take larger staples up to 2" long or more. Ryobi also makes great crown staplers (large and small) as part of their 18v Airstrike collection. I just wanted to give a few more useful tips and suggestions for the beginning woodworkers and crafters out there. Keep up the good work!

[@Anikasdiylife]

Thank you friend.

[@dreamie9868]

Which stapler do you find yourself using the most for upholstery? Do you think the 2 in 1 brad nailer/staplers are any good?

[@MarkFabian-c5j]

Outstanding presentation. Full of information, no waffle, concise. Loved it right through.

[@Anikasdiylife]

Glad you enjoyed it!

[@PaulMcKillop]

Thanks for such a clear, straightforward video. As promised, you answered all my questions!

[@Jizzlewobbwtfcus]

I recently started woodwork (blah blah blah - I'm visiting soo many sites to learn from I need to stop myself from giving my woodwork life story on every one I visit lol) and I need one of these. In the first 4 minutes I fell in love with you. You explain things so easily with no pointless frills. As you were speaking I made a decision based on your descriptions to go for the 18 gauge electric nailer. I was very happy when at the end you said that would be the best option for all rounder which is a testament to your teaching. Thank you VERY much for this video. You got a new sub and I look forward to watching many more of your videos to learn more. Much love from the UK : ]

[@Anikasdiylife]

Thank you and so glad to have you with us!

[@yoriregalado5163]

Thanks so much for the thorough explanation! I've been looking into purchasing a nail gun and was a bit iffy as to the choices. Great clarity from you! Thanks again.

[@Anikasdiylife]

You're so welcome!

[@Merzui-kg8ds]

Very well done video. Content explained clearly, in a logical order, and at a level that assists but does not insult the beginner.

[@Anikasdiylife]

You are so kind! Thank you this is entirely my goal

[@pvpixelarts]

Thank you so much. I am a beginner and starting on a few DIY projects and landed in a same situation. This video helped me to understand this tool ecosystem clearly.

[@willb1157]

Great! Came away knowing all I needed to know in Buying my first nailer. Was just doing a glue up with titebond wood glue. everything smudging around, things moving, sliding, skating on the glue. Would have been TRIVIAL if I had a nail gun to keep everything together. while the clamps went on. Came in determined to get one...but realised I didn't know anything about them. Thank you. Well presented and clear. Thank goodness for the internet and folks like you. Will

[@rogsolaris7411]

Amazing tutorial, exactly what I need to learn. Well taught, well explained with the details that beginners need to know. Thank you so much!

[@Anikasdiylife]

I'm so happy you found it helpful!

[@dr.daisyabreu6647]

Thanks so much for this video. I just bought a brad nailer for a project I'm working on and I am so glad I bought the correct tool. I am a complete beginner and I am so glad to see a woman teaching all these useful information. Thanks again.

[@Anikasdiylife]

Welcome to the channel! So glad to have you! Have fun with the project!

[@arghoknot]

I just watched your video and while In not a novice I am also not a professional. I liked that your video is very informative to the beginner. Thanks

[@Anikasdiylife]

Thank you. I will take that as a compliment

[@troyc333]

You are awesome Anika! Everything was thoroughly explained in simple, easy to understand plain language with visual aids.

[@Anikasdiylife]

So glad you found it helpful.

[@charlottetyus5341]

Thank for the explaining the differences so clearly! I will be installing baseboards in masonry walls and have been researching which nailer I needed. I may even feel adventurous and try a small wood working project.

[@Anikasdiylife]

I hope you do! I believe you can :)

[@DavidCarrick-d2s]

As a newbie I really enjoyed this video. Before watching I had a lot of questions, now not so many. Thanks Anika. Keep ‘em coming. Uncle D in Georgia

[@shantanuchoudhuri]

Thanks, covered 100% of the information for anyone new to nail gun.

[@Anikasdiylife]

glad it was helpful!

[@tonismith1198]

Thank you!! I’m in the market for one of these and now have decided to get the 18-gauge Brad nailer battery operated. Very clear explanation!!

[@Anikasdiylife]

Glad I could help!

[@Arunmallan]

That’s a great video for beginner. Even as a intermediate DIY person, this video gave me a good clarity .

[@critterkarma]

Great explanation. I’ve been looking at so many different cordless nailers, and you’ve answered my questions. 😁

[@Anikasdiylife]

Glad I could help!

[@carolynoliver5033]

Thank you for an EXCELLENT tutorial in nail guns. I now know what to buy which has been a struggle when asking for help in a male dominated department. Keep up the good work! At 69 years I'm just getting into woodworking for craft projects. I think I'll start with the brad nailer.

[@Anikasdiylife]

Love it! I'm glad you're learning and keep on building! You got this!

[@ctoumi2]

Wow what an excellent explanation and comparison of nail guns , thank you very much :)

[@Anikasdiylife]

You're very welcome!

[@nuriagiralt617]

Thanks for all the info. I didn't know about angle-finish feature and it seems essential to what I'd like to use it for.

[@Anikasdiylife]

Glad you found it helpful

[@williamcotton8746]

What a great review. Every detail was explained so clear that anyone can understand them. Thanks!

[@Anikasdiylife]

You're welcome!

[@jlynnstapleton9674]

Great tutorial. I recently got the Ryobi Brad Nailer. Already fixed a couple of loose baseboards in my bedroom with it. Definitely saves on whacking your fingers with a hammer.

[@teelee7196]

Thank you 😊 thank you 😊 thank you! On my way to get my nail gun & excited to start using it.

[@tasmedic]

This is the best video I've seen on this subject. It covered everything I needed to know. Thanks.

[@Anikasdiylife]

Great to hear!

[@LindaMay-j8f]

OMG thank you so much, I've rented from Home Depot to plank a wall and loved it, but was not sure what to buy you helped so much. I am going to get a Brad battery operated one. Again great instructional video.

[@Anikasdiylife]

You are so welcome!

[@ladyewo6778]

Great video! I was shopping for a nail gun earlier, Ivwas a bit confused about the 16/18 gauge nails. You summed it up perfectly. I knew I needed a brad nailer for a feature wall and finishing nailer to repair some fascia and other projects. I didn't have a total understanding of the different gouges being specific to each gun.

[@Anikasdiylife]

Glad it helped!

[@dragonflysdiscoveries7567]

Hi Anika, great video and someone who clearly explained Gauge. You have a new subscriber.

[@Anikasdiylife]

Thank you! Welcome to the channel!

[@chiefcomplaint3992]

Great video with a load of information. One thing I would add is that when applying face frames you should always hold the nailer perpendicular to the outside, not parallel, to decrease the problem of blow out that you mentioned in your video. As you said, trust me, i've been there. Trying to remove the nail and repair the damage can be frustrating.

[@Anikasdiylife]

Great tip!

[@RosemaryCreations]

You did a great enjoyable job of instructing. Very thorough. Thank you.

[@rajeshsandal4267]

Thank you Sister for such an amazing lecture, i learned a lot, i was planning to buy Nailgun, all my questions answered by you, thank you🎉👍

[@Anikasdiylife]

Wonderful!

[@McmM-cv9sb]

A very nice video thanks I'm going after the 18-in nailer thanks for your help..

[@Frankiejoel]

I didn't knew how to use tools, until now seeing this video step by step instructions the best video that I have seen so far, (step by step) Instructions You get a (A+)👍🌹

[@alastairdallas]

Great overview; very informative. Thank you. But I have to comment, as an owner of a Ryobi 18ga brad nailer, you do your viewers a disservice to omit the sound when you fire it. @13:22 for example. It's a loud bang and beginners won't know that until they pull the trigger for the first time.

[@pearlhall3787]

You are so through, that you need many more likes. This was excellent. Thank you.

[@Anikasdiylife]

thanks Pearl!

[@juve7]

Very thorough and detailed.

[@Anikasdiylife]

Thank you!

[@hipasiaful]

excellent explanation. Precise and clear

[@anug5574]

Wow! That is great explanation on the differences on 3 nail guns and the uses. This is very helpful as I was confused on which nail gun to purchase for my project. Thanks!

[@Anikasdiylife]

great! so glad it was helpful to you!

[@anthonybrazzale7251]

First time I have seen one of your videos. Fantastic presentation and extremely helpful. Thank you

[@ronaldk.warren4530]

This is a great video. It has a ton of insightful and you are so smart.

[@ajazshaikh1178]

Hi Anika, Excellent video that explained three types of Nail Gun.....Thanks for educating us.

[@Anikasdiylife]

My pleasure 😊

[@mynewtunes]

great explanation anika

[@garyolsen3409]

I've been a finish carpenter for almost 50 yrs {now retired} and believe me you need all 3 of these. Nail guns have gotten very affordable. You need a 15/16 finish nailer {angled are more functional} for setting doors and house trim. I use 18 ga. brad gun for smaller wood working projects like floating shelves and mantles. 18 ga. leave you with smaller holes to fill and the nails run from 3/4" to 2". You need a pin nailer for wood trim because the hole is almost imperceptible. All around gun-18 ga brad gun.

[@megae859]

I'm building a chicken coop. What do you recommend?

[@Anikasdiylife]

Sure. But this video is not meant for professional carpenters. It is meant for beginner DIY enthusiasts.

[@jacquelinemcmillan2793]

Would the strongest one attatch a 2x4 to brick wall?

[@alsprettycreations8005]

Great explanation of the different nail gun gauges and types of nail Guns. I love how you broke it all down.

[@Anikasdiylife]

So glad you found it helpful

[@manuelasalazar3135]

Hi I like your projects I want to try and I want to learn wood projects and I enjoy seeing you talk and explain to us the difference of H2 were used thank you, Nellie ❤

[@Anikasdiylife]

Awesome, thank you!

[@Anikasdiylife]

Thanks so much!

[@kcghuman1838]

Hi. Thank you for the info very well explained. Keep on making more videos.

[@DreamlandUSA]

Excellent lesson for beginners, it has answered all questions I had on mail gun . Thank you 🙏

[@Anikasdiylife]

you're welcome! Glad you enjoyed it

[@MichaelFalsone]

excellent instructions ! Really enjoyed and well informed

[@Anikasdiylife]

glad to hear it!

[@ank1409]

Very informative!! I’m a beginner and had absolutely no knowledge on these other than it’s purpose! I’m enlightened 😊

[@Anikasdiylife]

Glad it was helpful!

[@JennErmyMedia]

This is the exact video I needed. I need to put new 1/4 round mounding in my entire house and a nail gun is on my list of needed tools. Thank you for easily explaining everything.

[@Anikasdiylife]

Glad you found it helpful!

[@iksnivils]

@trophynuts Which did you purchase and were you happy with it and was there anything you learned using it that's not covered here?

[@steveschmidt342]

Great video! Things were explained in a crystal clear manner.

[@Anikasdiylife]

Great to hear!

[@lloydwilliams2911]

OMG. Thank you so much. That has just explained so much. I have a lot of tools but not a nail gun yet and your video has helped so much. Thank you

[@Anikasdiylife]

You're welcome! Glad it helped!

[@ramonurbaneja]

Excelente video, muy didáctico! Trabajo en The Home Depot y siempre he tenido confusión con eso, pero con tu video se me aclararon muchas cosas! Gracias, felicitaciones!

[@Anikasdiylife]

Thanks!

[@joete3324]

Thank you!! I always want to learn how to use power tools so I dont have to depend on anyone else.

[@Anikasdiylife]

You got this!! Have you see my course - Power Tool School to learn all things power tools? Let me know if you want more information.

[@KReid-zs6mr]

VERY helpful for a first timer! Thank you for this video.😊

[@Anikasdiylife]

You're so welcome!

[@_VICK_]

How weird!! I was JUST thinking about this bc I need one…and then Boom I get the notification! Lol

[@johnsandycasella1810]

Me too!

[@Anikasdiylife]

funny how that happens right?

[@mohamadzaffan1432]

It appears when u searched things in google

[@TheDakotaFrazier]

Google AI has learned to read minds

[@walkedawayjoe]

The matrix 😎, but seriously me too.

[@ginnyhorn2708]

I am not intimidated by nail guns any longer. Thanks Anika!!!

[@Anikasdiylife]

you're so welcome!

[@maricruze6257]

Hey, I am so glad I discovered your channel today! Your work is amazing and you teach it so easy! I love how informative you are, it really helps so much! You are great, I will keep up with your channel and I will also share with persons I know will be interested. There is one topic I would like you to talk about, and that is how to work with pvc panels and also what tools to use. I've asked before in other channels however I have never gotten a response. I like with the ease you explain the work and also on how to use the tools needed. You are straight to the point! I hope you will be able to do a clip on pvc. Thank you!

[@Anikasdiylife]

Thank you! So glad you find the videos helpful. PVC panels are pretty easy to work with. You can use all the same tools. just use blades meant for PVc.

[@kellyjean4981]

Very detailed and helpful video. Thank you. I have the 18 gauge ryobi and I love it!

[@Anikasdiylife]

you're welcome! glad it was helpful for you Kelly!

[@creolelady182]

Absolutely fantastic video. A Natural born speaker and teacher

[@Anikasdiylife]

Thank you so much 🙏🏼

[@aleshabee7386]

Thank you so much for this video!! I’m a beginner and this provided exactly the information I needed to choose a nailer 🎉

[@Anikasdiylife]

Glad it was helpful!

[@Lobesanft]

Pneumatic nailguns indeed have a certain noise issue but 6 l compressors are meanwhile available battery based and supply a sufficient amount of air at 60 to 130 psi. An advantage which isn´t mentioned here is that nailing is possible at much faster nailing frequency compared to a battery nailgun or an corded electic nailgun and I use all of them.

[@Zhcwu]

I got the husky quiet compressor and it is so quiet battery nail guns are picking up the pace but the price tag still pretty steep

[@jerryparker6980]

Wow how informative. Keep up the awesome work.

[@Anikasdiylife]

Thank you!

[@CorkyWine]

Thank you. Great explanation.

[@Anikasdiylife]

You are welcome!

[@anonymouswriteperson]

exactly the info i was looking for, thank you

[@Anikasdiylife]

Glad I could help

[@thormusique]

This is a wonderful video, thanks! I'm planning to purchase some nail guns but have been looking for information on what to get and why. This is great information, cheers!

[@neo_nawaratintarapanich6209]

Easy to understand and decide to own one or two. Thanks! For me, the pin nailer is a good choice for small projects. Next VDO?, any wooden Christmas gifts, cheers!

[@srisubu]

Nice tutorial. Own 18 gauge Brad nailer and it’s really useful. When to use miter Vs circular Vs table saw?

[@Anikasdiylife]

great idea! I do have a blog post on miter vs. circular that would be a good start: www.anikasdiylife.com/miter-saw-vs-circular-saw/

[@Qdub34]

thank you for this video. Best explanation I've seen, and I've been LOOKING.

[@Anikasdiylife]

You're very welcome!

[@DonzLockz]

Excellent, everything I needed to know in a clear and concise 15:50 min video. Awrsome!👍🤠

[@Anikasdiylife]

Thank you!

[@brigi68]

Great info, thank you Anika!

[@Anikasdiylife]

You're welcome!

[@huiyu7354]

Thank you for this great video, you explained very well, it is very helpful!!

[@theenduropest]

Thankyou for such a an awesome, in-depth and detailed vid on this, very helpful! 😁

[@TranTek]

Great info ! Anika my customers tend to love Milwaukee especially those heavy frame nailers lol

[@Anikasdiylife]

Thanks!

[@stephaniez2]

Just found your channel. You are amazing. Trying to finish the trim work inside my house after Harvey.

[@Anikasdiylife]

Thank you! All the best with the trim work!

[@clivegable8062]

Thank you so much for this tutorial, excellent channel Anika 🙏

[@terristroh3965]

When nailing edges, hold nailer perpendicular to the edge. The nails will deflect left or right if it meets any sort of resistance. That’s why blow out happens when nailing in line with or parallel to the edge.

[@Anikasdiylife]

Thanks for the feedback Terri!

[@rocketqueen232]

Thanks for another great video! I found your video on jigsaws really useful for my first project 🙂

[@Anikasdiylife]

Great to hear!

[@nlee9245]

This channel is great! Anika's tool introductions are so helpful. Do you have a video about cabinet trim installation? I'm planning to install 3/4 in trim around my cabinets and need to make sure I cut everything properly.

[@Anikasdiylife]

Not yet! but this might be helpful? www.anikasdiylife.com/trim-window-with-bullnose-corners/

[@TomMoosZA]

Thanks for another great video, Anika. Very helpful. 👏👍

[@Anikasdiylife]

glad it helped!

[@TomMoosZA]

@@Anikasdiylife It absolutely did. As a beginner, I now have a better understanding on how they work and which one will suit my purpose. You are a ⭐!

[@rabbitambitious]

This was so helpful, thank you. ❤

[@dreid4760]

Great, Great, Great explanation and examples!!! Thanks

[@Anikasdiylife]

Glad it was helpful!

[@jusformommy]

I love my Dewalt nail gun..it’s perfect

[@mattadams7922]

It's a brad nailer, does about all these with a swap of length of nails. It's the most versatile of the group and can handle the most. Make sure it has the ability to handle lengths up to 2 inch. Go pure battery now skip gas. Kobalt XTR is a beast for the price.

[@Anikasdiylife]

Great!

[@jucaguima]

This was very informative! Thanks for doing that!

[@michaelkogan4198]

Ecxactly what I was looking for - thank you very much !

[@Anikasdiylife]

you're welcome!

[@paulc.1639]

I'm in my 60 and been doing handyman stuff for a very long time and can say I have a lot of tools an Ryobi is my tools of choice. Also I've never had any issues with any of them. PTL

[@Anikasdiylife]

nice! Glad to hear it