WHICH ONE IS BETTER? LO PRO FXONE VS TPOB TROLL

[@KalTheBarber]

This comparison makes sense. Always dropping bangers!

[@ConcisetheBarber]

thanks bro

[@MCFCAdonis]

TPOB is just cheap chinese knock off of the babyliss. Babyliss have better qaulity and the better customer support, It’ll last you year. But TPOB is a chinese clone of the LoPros and will break after a year

[@KalTheBarber]

@@MCFCAdonis thanks for the lesson 🤓

[@barberq210]

If the clippers aren’t charged enough it will lower the amount of power: the TPOB are known to not have that much charge straight out the box, but if he would have charged them they should read much closer to the 6800 power

[@ConcisetheBarber]

gotcha

[@3838ejhernfbbc3b]

Nahh. The new clippers remain the same rpm till the battery dies.. So it doesnt matter if it have 5% or 100% battery life..

[@DoritosResidue]

​@3838ejhernfbbc3b yeah the dude is wrong these are lithium batteries not old NiCd batteries. NiCD is 80s tech lol

[@charlesfaniel7679]

There's a newer version of the Troll the blackout that comes with charging stand and XO blade.

[@ConcisetheBarber]

thats a good way to use them

[@charlesfaniel7679]

And I believe it has higher rpms but I'm not sure. The XO clipper is brushless and 7200 rpms

[@acalderon0288]

​@@charlesfaniel7679Not at all! It's exactly the same cutter, I have it and it only gives 6000 rpm! The difference is that it's a different color and comes with the charging base, I've had problems with the blade, it moves!

[@Jayblends]

A better comparison with have to be the troll to the rotary lo pro. Do the lo pro fx one to tpob xo

[@ConcisetheBarber]

I would have ...I dont have that clipper tho..(rpms different?)

[@Jayblends]

@@ConcisetheBarberdifferent and the og lo pro isn’t the same motor as the new

[@honorclubmedia]

Love how Jay shows love but has his brands back. I’ve bought TPOB because of his breakdowns. And have and is because of Concise

[@adriansimental6567]

I have both the lopro fx ones and the tpob xos and lemme tell you damnnn its razor close. Both have amazing performance i love em both. But i might give the edge to xos because of the power. Absolutely EATS through anything

[@THEPISSEDOFFBARBER]

@@ConcisetheBarberI’ll send you a pair from the next batch 🙏🏻

[@Supreme_Sole]

Honestly i feel like that both theses machines are good quality products and whether which is better based on preference. Granted there are differences between them but you also gotta remember that babyliss has been around for awhile now and tpob is an independent new brand wit not a lot of resources. Give it a couple of years and TPOB is gonna one of the top brands to buy

[@ConcisetheBarber]

thats understandable ..

[@Dominicreviews]

The video quality is amazing brother. What camera are you using?

[@ConcisetheBarber]

i use sony ev-z10

[@WazzyTV]

@@ConcisetheBarber is that the Zv E10 u mean

[@ConcisetheBarber]

@@WazzyTV lol yes

[@WazzyTV]

@@ConcisetheBarber what lens do you have on it ?

[@ConcisetheBarber]

@@WazzyTV the stock lens that came with it 16mm-50mm

[@eirebarbers]

What app for rpm bro

[@ljjlander1]

Did you oil them first?

[@ConcisetheBarber]

always

[@manaboiman]

Nobody did a comparison on the tpob machete

[@ConcisetheBarber]

never had those

[@3838ejhernfbbc3b]

You should make a teardown comparison

[@korybarron32]

I have both haha. I love clippers

[@ConcisetheBarber]

dope

[@d.j.wallace61]

Lo Pro FX One for me💪🏾

[@ConcisetheBarber]

respect

[@MCFCAdonis]

TPOB is just cheap chinese knock off of the babyliss. Babyliss have better qaulity and the better customer support, It’ll last you year. But TPOB is a chinese clone of the LoPros and will break after a year

[@jacobsebastien3910]

Are those Babyliss low pro F1 hard to zero gap?

[@ConcisetheBarber]

No problem at all

[@emmanuelhayden2449]

Babyliss and TPOB get their stuff from China so it’s almost the same exact clipper

[@ConcisetheBarber]

almost but there is some differences

[@TheRealTatamius]

Can you put the jay blends blade from the troll onto the low pro

[@ConcisetheBarber]

yes

[@TheRealTatamius]

@@ConcisetheBarber cool, thanks

[@jt2475]

You don’t like the mim blade? Why or why not? Thx

[@THEPISSEDOFFBARBER]

Respect bro nice video ✅✅✅

[@ConcisetheBarber]

apprecite the feedback

[@pbd6488]

Tpob all the way the lo pros are nice but tpob feels better, cuts really amazing, longer lasting, and I don’t have the lever issue

[@MCFCAdonis]

@@pbd6488 TPOB is just cheap chinese knock off of the babyliss. Babyliss have better qaulity and the better customer support, It’ll last you year. But TPOB is a chinese clone of the LoPros and will break after a year

[@justcryHavok]

What’s the rpm app? I wish to compare

[@ConcisetheBarber]

gigi app

[@justcryHavok]

Gigi app? I have the same troll clipper. Wanted to see if mine read as low as 6100 also

[@borispalmier234]

@@justcryHavok hey, what is the result bro ?

[@justcryHavok]

@@borispalmier234 nvr found the app

[@victorcedillo9338]

Do the cyborg trimmer / andis slimline trimmer comparison next 😂,

[@ConcisetheBarber]

i get the joke ..but i can

[@jasonmercurio1928]

The FX one Lo pro is by far the best adjustable clipper out right now… Not even a contest

[@ConcisetheBarber]

definitely in my top 5

[@Luke-wh9ru]

have you had temp problems? my blades seem to get quite warm after only 2.5 mins

[@jasonmercurio1928]

@@Luke-wh9ru no, not at all. The blade gets a little bit warm. But it is nothing that is uncomfortable to the client.

[@MCFCAdonis]

TPOB is just cheap chinese knock off of the babyliss. Babyliss have better qaulity and the better customer support, It’ll last you year. But TPOB is a chinese clone of the LoPros and will break after a year

[@Luke-wh9ru]

@@jasonmercurio1928 There's no reason for me to cap- I am unsponsored. Simply just sharing my initial experience with them. Does yours have a black or blue moving blade?

[@Luke-wh9ru]

I'm fr Canada and my lopros came w the blue on blue blades... they get warm in 2.5 mins!! seem to be too hot after 5 for some rzn?? other than the temperature, they r my fav clippers hands down

[@ljjlander1]

Oil the blade bro lol. I run mine HARD non stop all day long for normally 10-12 hours and I never have a problem with them getting hot

[@Luke-wh9ru]

@@ljjlander1 I do oil them/clean them constantly- maybe I don't use em enough like you. Comparing clipper blades to a cast iron skillet, you szn the pan.. maybe that's my issue but I know my Jrls don't get that hot that fast. Do you oil then coolcare or what's your process/ frequency?

[@ljjlander1]

@@Luke-wh9ru I oil them about 3-⁶y⁵⁵ times a day or so and use coolcare between clients she that works for me

[@mavericksdad050]

I’m not a Babyliss fan due to their horrible quality control issues. That said, they are investing in better technologies every year. TPOB doesn’t have the resources Babyliss has for all the R and D.

[@gaalford]

What is the name of that rpm app?

[@ConcisetheBarber]

Gigi

[@tmbrown2409]

Should do one with the Jucai pro I have been told they manufacture for babyliss

[@ConcisetheBarber]

never heard of them

[@robrealcuts]

This or jrl

[@ConcisetheBarber]

Jrl

[@robrealcuts]

@@ConcisetheBarber jrl over the fx one ? Bet

[@HIGHSOCIETYJAY]

Not worth the 120 extra for a few hundred rpm in my opinion

[@ConcisetheBarber]

Gotcha but what do you mean 100 rpm?

[@phreshian]

TPOB all the way

[@MCFCAdonis]

TPOB is just cheap chinese knock off of the babyliss. Babyliss have better qaulity and the better customer support, It’ll last you year. But TPOB is a chinese clone of the LoPros and will break after a year

[@pmoproductions9598]

My troll rpm is 6700 bro

[@ConcisetheBarber]

thats good ..maybe its just mines

[@3838ejhernfbbc3b]

U comparing the trolls to the new lo pros, the trolls are the copy of the older lo pros not the new ones

[@GeniusMrRemyd]

Tpob makes toys Babyliss makes tools.

[@korybarron32]

Not true at all man. The play is absolutely amazing. I have the babyliss fxone lopros and skeleton clipper and trimmer. The plays smoke them both.

[@acalderon0288]

​@@korybarron32Wait a few months and you will see how noisy the tpob becomes, not to mention that the blades move and need to be adjusted frequently!

[@bilsrky8612]

You can’t even compare it! Troll is worst clipper I have ever used! Broke in 2 days!

[@ConcisetheBarber]

Oh wow did you contact them?

[@bilsrky8612]

@@ConcisetheBarber yes their response was “nothing we can do but your feedback will help us to improve,bla bla…” shocking!

[@slackerzsincity8822]

TPOB just seems like a ugly brand name feels cheap vs to a name Babyliss pro

[@fifty5nine]

Names mean nothing, both use internals made in China. However, the lopro uses a brushless motor while the trolls use a rotary

[@AdamDiazOfficial]

Great video! For me though, you can’t beat what you get for price and quality like you get with TPOB!! Slime Gang 🥷🏼

[@ConcisetheBarber]

much respect

[@MCFCAdonis]

TPOB is just cheap chinese knock off of the babyliss. Babyliss have better qaulity and the better customer support, It’ll last you year. But TPOB is a chinese clone of the LoPros and will break after a year

[@dasher3138]

@@MCFCAdonis 95% of all clippers are made in China... and many of them get the same supplier, tpob is great especially for the price

[@MCFCAdonis]

​@@dasher3138 Had multiple break on me less than a year, and that includes stylecraft. They're exact same product with no qaulity control. Just stick to well known brands that have stood the test of time (Wahl/Andis/Osters/Babyliss)

[@rda6029]

​@@MCFCAdonisbabyliss are also manufactured in China so what's your point?