Whiskey Garage Install: Lexus IS300 EZ Knuckles V4 Angle kit

Hot to install the EZ Knuckles V4 kit to an IS300. These will work on other Toyotas, see the list below.
Get yours here:
Specifications:
4130 Chromoly guide pin inserts
Built in RCA
CNC machined forged T6061 aluminum
Bump steer correction
Self Steer correction (moved the center of the wheel back 1/2in)
Over 65 degrees of drift angle fun
Ackerman angle has been changed from 0 to +5 to replicate an OEM feel.
Easy/ Affordable/ Fun
EZ Knuckles
Will work for:
is300/200 altezza
JZX 90/100/ 110
JZS 151/ 171
JZS 147/161
LS400 UCF10/11/20
Requirements to run my kit:
-adjustable coilovers
Big angle adjustable caster arms for clearance
Low off set wheels EX: +22 to zero offset wheels.
-If using 18in wheels stick with a 35 series tire up front!
-If using 17in wheels stick with a 40 series tire up front!
Recommendations For is300/is200 chassis
Wheels:
-front 17x8+12
My current camber setting on my car:
-Front camber with my knuckles, without additional arms: -5
-Rear camber with toe and camber arms: 0

[@dantealvarez2421]

Dan, solid walk through on the install. Much thanks from another IS owner.

[@Officer_Dan]

Just bringing that GKtech voice to other stuff I am interested in!

[@jaredconnot1022]

Also great write up, definitely a big help and I appreciate you making this!

[@davidmadden6453]

install video always spot on🤐

[@jaredconnot1022]

You still need to grind down the Allen head bolt, even with moog. I am currently installing and it needs to be flush(Allen bolt).

[@DrifterAtHeart-Woocash]

Yeah Dude 🤟

[@Soltor1974]

Great video.

[@Officer_Dan]

Thanks dude

[@Soltor1974]

Nice to see some people care about quality. It’s taking me longer then most to modify the old gal but I only use quality parts 💰💰😩 so it’s taking some time but it’s worth it in the end

[@Officer_Dan]

@Soltor1974 always worthwhile unless you never finish lol finish that thing!

[@Soltor1974]

@@Officer_Dan it’s been a 20 year process but the way I’m doing it I can still enjoy the car while I stack parts. About to do some interior upgrades seats steering wheel harness. Waiting On a works bell hub from the mother land

[@SomeIdiotDrifting]

Hey hopefully you’ll see this, how did you know the rotor was close enough toe for the tie rod cut? Just eyeballed it or did you measure toe with the wheel on?

[@Officer_Dan]

Measured front of rotor to rear of rotor, anywhere inside an 1/8th inch and you are good to go

[@SomeIdiotDrifting]

@@Officer_DanI committed and cut them, it worked great, thanks boss. Happy shredding 🫡

[@tonehawara1435]

Where can I get it from And how much is it Can I please get the link for the kit

[@Officer_Dan]

Depends on what you want to get, this whole kit is around 1600 www.ezknuckles.com/shop

[@snooz510]

Your voice reminded me of the guy that narrates the creepy stories here on KZbin. 🤣

[@Officer_Dan]

Link me

[@snooz510]

@@Officer_Dan kzbin.info/www/bejne/aWa1h6d6aZJniLM The same slow tone . Haha

[@privilleged]

Works for jzs161 too I assume?

[@devonstrickland5640]

hey man, where did you get that sheet that details all the torque specs?

[@Officer_Dan]

A buddy let me use all data at his shop

[@fortillian]

the is300 service manual. easy to find with a search

[@ayeitme6773]

How is it so far? Update Updateeee lol

[@oruisuu9131]

Rack boot link ?

[@davidmadden6453]

install video always spot on🤐